How to Replace Rear Brake Hose 2000-06 GMC Yukon

Buy Now!
New Brake Hose from 1AAuto.com 1aau.to/ia/RABRL00015
A leaking brake hose is bad news! Losing fluid, or getting air in the system can cause the brakes to weaken or fail completely. Old, dry rotted, cracking, or bulging lines are on the verge of breaking and starting a leak. This video shows you how to install a new TRQ rear brake hose that is engineered to fit your 2000-06 GMC Yukon.
• Buy TRQ at 1AAuto.com: www.1aauto.com/yt/i/RABRL00005
• Check here for more videos on the 2000-06 GMC Yukon: • GMC Yukon 2000-06 2nd Gen
This process should be similar on the following vehicles:
2000 GMC Yukon XL 1500
2001 GMC Yukon XL 1500
2002 GMC Yukon XL 1500
2003 GMC Yukon XL 1500
2004 GMC Yukon XL 1500
2005 GMC Yukon XL 1500
2006 GMC Yukon XL 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oar9/1AXAA00013
• Pry Bar 1aau.to/oiW/1AXAA00020
• 16mm Wrench
• 12mm Socket 1aau.to/oacs/1AXAA00015
• 22mm Socket 1aau.to/ocK/1AXAA00266
• Brake Caliper Hanger 1aau.to/oX/1AXAA00084
• 1/2 Inch Air Impact Gun 1aau.to/oS/1AXAA00252
• Socket Driver
• Socket Extensions 1aau.to/oacs/1AXAA00015
• Torque Wrench 1aau.to/oye/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Liquid Thread Locker
• Paper Towels 1aau.to/oiA/1AXSS00035
• Floor Jack 1aau.to/owz/1AXAA00068
• Jack Stands 1aau.to/owL/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
GMC Yukon 2000-06 2nd Gen: • GMC Yukon 2000-06 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@LouisEvangelista007]

Excellent video. It was great showing the disassembly of the clip and also explaining how to free up the nut up top and not to tweek the line. Best video explaining that. Great job!

[@diversity2739]

Thanks

[@lynelllyons2268]

I wish you would’ve did both sides because the other side is different you burnt all that time on replacing the caliper a d pads when this was supposed to i be about brake hoses

[@v3zMedia]

Perfect video. Thanks

[@biggusdickus9809]

Very helpful.

[@agresham1982]

Good video

[@ajsmith8115]

What do I do if my metal brake line is leaking from that point

[@adrenalinehigh2070]

Title doesn't match what you're doing. This is a rotor & caliper brake job.