How to Replace Thermostat Housing 2007-2017 Jeep Compass

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@Alex77390]

This is the only channel that actually teaches you things the right way. I've seen hundreds of videos to change my thermostat and none of them showed you to check the pressure with the pressure tester.

[@traviswolf]

This video enabled me to replace my thermostat on my 2014 Compass, and fix the overheating problem. I’m a layperson with basic tools, but this video made it possible. Saved me a significant repair bill. Thank you!!!

[@garycorbin2789]

Agreed , I bought the new kit and forgot to index the thermostat , so I watched the tutorial very closely it was immensely helpful , I'm grateful. But beware on the Avenger the heater hoses on 2008 models are a bigger diameter , but gates do conversion hoses to allow the updated housing to fit.2009 the changes happened .

[@moonmonkeyaz1104]

Thank you. You are a wonderful teacher and covered everything thoroughly.

[@blkcrwn4079]

Damn good video, no extra bullshit, just straight to the point

[@JamesMLaRose]

Great video, the only thing i wouldn't have done was remove the ecu. I would have just unscrewed the top of the air filter housing and then flipped that and the ecu over to the left.

[@KarasouTengu]

Appreciate the videos, its a good reason why im not buying another jeep anymore, too complicated to do simple work. My car doesnt quite get up to temp, so I assumed my thermostat might be bad and stuck open, and thought about replacing. This however, is something to be done on a nice weekend. Or in a shop lol.

[@bertboi2522]

The housings are cheap and I came to find out that I keep replacing them every year because my air temperature sensore was dirty the one that is on the air intake. It was delaying my fans to activate. I replaced it and my jeep sounds very different and runs cooler now. So I will update if it helps with the housing. I have 149,000 miles on my jeep patriot so far bought brand new 2014.

[@John336NLT]

Glad I found this video. I have to do this to my patriot

[@zerofukks]

Really helped a lot was able to do whole job through your video thanks again

[@stayslidewayz]

thanks this video helped me fix my overheating issue

[@freddyalfarodavilla2463]

Is it worthy to only replace the thermostat? Not the full housing?

[@shawnwithee6336]

Makes sense 2 thermostats set in plastic when it fails the heat builds up and the heat range for that housing damages the integrity and crystalozrs and puts stress Cracks where the leak is but maybe doesn't leak constantly plastic cools faster than the metal

[@brucebanner4806]

Hi I'm having issues lining up the bolts after putting in new houseing any tips I've tried over and over not stripped at all fit fine with houseing off its a brand new matching housing any tips please and thank you

[@khalidnznaime5198]

Thank you , Grate and easy descriptions

[@chewsterchew9178]

Replaced the housing, and now my temp gauge is at 3/4 any tips on how to go about this?

[@ryantaylor4196]

Obviously this is a compatible process with the patriot right?

[@garyparcher2011]

It is very clear not to disconnect the plugs from the CPU. First hand experience that's a $1900.00 follow mistake. You should not doing it this way for viewers.

[@WilliamGMalek]

Great illustration. Thank you very much.

[@purpledoge4466]

do you really need the 2 thermosthat? or can you used the same one at the top 210?? and torque specs please

[@victormendoza6306]

Good job, if fan does not work could be fuse or relay in this case?

[@dankrier2666]

Why would you need to replace the entire housing, why not just the thermostat(s)?

[@raffaelecuomo8707]

In the Jeep compass 2.2 engine Crd the thermostat is in a different location

[@maximilianocastillo6581]

Buenas tardes has cambiado la caja termostatica de dodge journey 2010rt 2.7 es complicado no tenes video gracias.

[@bertboi2522]

I keep seeing a small puddle of coolant building up on my transmission close to that housing. Replaced the housing twice and still keep getting that. Any suggestions. 2014 jeep patriot 2.0 92000 miles

[@MrOndzzz]

Any luck finding that leak? I have a similar situation, mine is leaking up higher on the plastic intake behind some sort of cube to the left of the thermostat housing. Please let me know if you found where it’s leaking.

[@chriseTx]

possibly simple minded question... is this a 1/4 turn petcock or does it unscrew completely? I worry with plastic parts that I will turn them too far and break something.

[@mrbigstuffbsa]

This was fantastic! Thank you and great job!

[@auginater4200]

You say the new thermostat housing may only come with one thermostat but you had a second one? I'm confused

[@pedrocolmenares82]

Excelent,,Congratuleychion friend very good

[@lionsn11]

Should I burp the coolant system after replacing the housing and thermostats?

[@richsmith9063]

That was a GREAT video !!! Thanks.

[@evgeniysolovkov4852]

hi, when tightening the bolts, what kind of force did you use in the key. Show me the numbers please.

[@ImTheBabyDoll]

Petonges! I love it. There's Frenchman somewhere in that boy lol.

[@DEADLOK69]

My brother noticed that the container did not have any coolant or was low. Will this cause the car computer to beep.

[@rodyfunk]

is there a reason why you can't just replace both t stats and re-use the housing?

[@maidireforse]

Solo per avere una vaga idea, quanto può costare in media un intervento così in officina? Grazie a chi mi risponderà...

[@carlosmarroquin3230]

Thanks

[@reviewsbyHP]

So all the parts that were replaced were thermostat, housing, and O-ring?

[@michaelrobinson1741]

Thanks

[@coltsfanudig]

Does it work for jeep Patriot 07

[@VictorManuel-ut5jb]

Good video.thanks

[@KatherineGonzalez-qz4uw]

No more over heating Thanks

[@pattypeterson7261]

What are the torque specs?

[@flyingsquirrelful]

Thank you!

[@whiteboyi4053]

What the torque spec

[@arto1248]

Your can stop at 4min, no need to disassemble anything else as long as you have a flexible extension for your socket wrench, you can get the bolts off the housing without having to take anything else off.

[@mronemanband1]

You didn't tighten the lower intake tube clamp

[@brendastolkavitch9277]

What do I do if only one fan comes on

[@Salvi503]

I bought a thermostat housing from autozone and my problem is that the back hoses are to big for the connection.whats a suggestion on what should I do to get this solve

[@lungilethabethe6188]

thank you

[@SilverSin]

Wont this mess with the computers memory? I mean removing the two red connectors on the module.

[@jeremybethany6380]

Do you have to replace the whole housing when replacing the thermostat?

[@jeffcuevas5728]

A1 auto???

[@Action_Clips_CODM]

The thermostat is really buried deep.

[@mrbigstuffbsa]

Thank you!