How to Replace Window Regulator 1988-02 GMC Sierra 1500

Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ib/1AWR...
Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle! This video shows you how to replace both the window regulator and the motor on your 1988-2002 GMC K1500.
• Check here for more videos on the 1988 to 2002 GMC K1500 Sierra: • GMC K1500 Sierra 1988-...
This process should be similar on the following vehicles:
1988 GMC K1500
1989 GMC K1500
1990 GMC K1500
1991 GMC K1500
1992 GMC K1500
1993 GMC K1500
1994 GMC K1500
1995 GMC K1500
1996 GMC K1500
1997 GMC K1500
1998 GMC K1500
1999 GMC K1500
Tools you will need:
• Pocket Screwdriver
• 10mm Socket 1aau.to/oa/1AXA...
• Cutoff Wheel 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• Socket Driver
• Socket Extensions 1aau.to/ob/1AXA...
• Painter's Tape
• Center Punch 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
GMC K1500 Sierra 1988-2002 4th Gen: • GMC K1500 Sierra 1988-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@EddierThanThou]

The ONLY video I've seen showing how to replace the regulator/motor with the window UP. THANK YOU

[@dalesworld1308]

This is the BEST demonstration of this on KZbin.

[@michaelcaudle6114]

This guy should do all 1aauto/trq videos. His and Mike videos are best.

[@VTEC_VAULT]

Great information, been looking for a how to on a manual regulator replacement any ideas?

[@EataPeachMike]

Do u guys have a video on replacing the glass window?

[@tonycotta6602]

you just made your job harder i just tape as you did disconnect wiring then slide it out of trsck then do the job at the table then reinstall

[@burnerloco4138]

I used to install the front door glass on the assembly line and If I remember correctly the glass is attached to the regulator and the panel and it’s in stalled as a complete unit.

[@tomharmon1987]

Awesome video, well done!

[@PermianPanther]

Awesome!!

[@josejuanrosales3614]

What are the size of those rivets?

[@Wowdude413]

He said 1/4 inch I think