Рет қаралды 15,546
Buy Now!
New Valve Cover Gasket Set from 1AAuto.com 1aau.to/ia/1AEG...
This video shows you how to install new front & rear valve cover gaskets from TRQ on your 2003-2008 Honda Pilot. Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket set will make sure the oil stays inside the engine where it belongs!
This repair was done on a 2007 Honda Pilot EX-L 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2003 Honda Pilot
2004 Honda Pilot
2005 Honda Pilot
2006 Honda Pilot
2007 Honda Pilot
2008 Honda Pilot
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oby4/1A...
• Phillips Head Screwdriver 1aau.to/oby4/1A...
• 10mm Wrench 1aau.to/o66/1AX...
• 10mm Socket 1aau.to/obvH/1A...
• 12mm Socket 1aau.to/obSh/1A...
• 8mm Socket 1aau.to/obvH/1A...
• Seal Puller 1aau.to/og/1AXA...
• Trim Tool Set 1aau.to/oaoJ/1A...
• Pliers
• 1-3/16 Socket
• Ratchet 1aau.to/obU7/1A...
• Torque Wrench 1aau.to/oaYa/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oJk/1AX...
• Gloves 1aau.to/oaHB/1A...
• Safety Glasses
• 6mm Hex Socket
• Razor Blade / Gasket Scraper
• Rubber Mallet
• Sanding Block
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.