How to Replace Front Shocks 1994-2004 Chevy S10

Buy Now!
New Shock Absorber from 1AAuto.com 1aau.to/ia/1ASHA00194
This video shows you how to install shock absorbers on your 1994-2004 Chevy S10. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.
This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• 14mm Wrench 1aau.to/oa/1AXAA00010
• 6mm Wrench
• 13mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• 3/8 Inch Air Impact Gun
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXAA00044
• Floor Jack 1aau.to/oa/1AXAA00068
• Jack Stands 1aau.to/oa/1AXAA00065
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@PerrysGaming]

just bought the front and rear for my blazer. only $116, cant wait till they get here

[@calebtabb3010]

If there hard to get off take channel locks and go under the shock tower and clamp on the shock then untighten the bolt

[@tylerbelche2063]

Can you guys make a whole unedited video on how to replace heater core on 99 Chevy s10 blazer

[@jeromewilliams4574]

Thank you, planing on doing my 98 here real soon. Thanks for the post.

[@wesleymeadows3183]

I'm going to try to do this myself.. This video gave me the extra confidence 😂😂😂😅

[@TRQ]

+@wesleymeadows3183 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@jrgranados5853]

Thats the most easy thing to do in my truck i guess

[@dylansnook5356]

Just ordered a pair for the front and rear today on my blazer

[@user-ik5zu1zq4m]

Any difference between a 99 S-10 front shock in a 99 S-10 front shock

[@edwardh1003]

Does the vehicle need a front end alignment after installing the new shocks?

[@TRQ]

+@edwardh1003 Yes, an alignment would be necessary after this installation.

[@xx_tyrome_xx8288]

Mine was from Florida so of course I had to grind the bolts off lol and my upper ball joints

[@GOPACKERSJT]

For anyone in Ohio doing this.... Be prepared to grind that top nut off. I also had to put a channel lock between the spring and on top where the little wrench is supposed to go to get what was left of the nut off. I also hit it with PB Blaster about an hour before attempting. Maybe soak them overnight.