How to Replace Driver Side Front Wheel Hub 2008-2012 Honda Accord

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@davetremain8997]

Man, this looks like a lot more work than I anticipated. 🤣

[@Adlamo]

why do you need to loosen the bleeder to push the caliper back in. Can't you just push it back in and it will push a little fluid back into the fluid reservoir?

[@jarronsmith6555]

Yo that’s a whole new knuckle 😂

[@JuanVega-ns5ok]

Exactly. The old one was a rusted mess.

[@davesmith7037]

The best thorough how to video on KZbin.

[@jamesburton1050]

Need to replace a wheel lug stud on front driver side. Will i need to do most of this to get to the stud?

[@Arthur-ke9vz]

How do I know if I need the bearing and the hub? Thanks

[@alishersalimov7152]

Is it the same for the passenger side

[@LazaroAlejo]

No one explain how they got hooked up the master wheel bearing remover to the axle nor which of the many different tool they used

[@brendonaustin5947]

😂 thats a whole new nuckle

[@dirtwasp09]

where do you get the hub puller?

[@JuanVega-ns5ok]

16:45 Not the way a castle nut and cotter pin should line up. Something is wrong.

[@loufromdabx]

Can you just remove the caliper bracket? Or do you have to remove pads and caliper?

[@bert1913]

Remove caliper/bracket as one piece

[@randyvalenzuela5336]

Amazing video easy to follow keep it up helped out tons

[@Lowrance81]

U changed the whole nuckle an all

[@gottosahani7571]

شكرا فيديو رائع ❤

[@ramonmoreno5487]

Looks like he had to replace the wheel bearing as well because part of the bearing came out when the hub came out.

[@GladenofAsgard]

Let me just use an impact driver on a rusty bleeder valve. It snapped off! 🤡🤡🤡

[@tommoland5548]

Notice that he's putting on a new nuckle and not the old o e hmmm

[@rpasco9352]

The title is 'How to Replace Driver Side Front Wheel Hub 2008-2012 Honda Accord', NOT 'How to Remove the Complete Driver Side Front Knuckle Assembly to Simply Replace the Wheel Bearing' ! It would be far quicker and easier to REPLACE the entire complete knuckle assembly for $150 in parts: New bearing, new hub, new speed sensor protection rim, new lug bolts! NO OTHER DISASSEMBLY/REASSEMBLY REQUIRED. You just showed that it takes removing only 2 nuts to completely remove the entire complete knuckle assembly. Sheesh !

[@SquareCitySpeedShop]

Why is this car so rusty?

[@josefranciscoesquertalaman3827]

Like