True 3 door got me

i got a call back on a 3 door drink cooler, lets see what i find out.
if you would like to buy me a cup of coffee www.paypal.me/...
my knee pads amzn.to/3WuyXAs
my pocket knife www.amazon.com...
#goprohero12
#refrigeration
#repair
#hvac
Join this channel to get access to perks:
/ @norcal-refrigeration

[@Wdog84]

I did a year working with a guy who did 6 years with Coke, he thought me a neat trick if you think the cap tube is blocked and you need to get it going till you get parts. Block the condenser off and let the liquid line get nice and hot (not too hot to cause damage) and the pressure and heat can sometimes push the restriction thru. Got me out of a few Friday arvo specials lol

[@RT-qd8yl]

I think that's one of those absolute last resort type tricks, I wouldn't be doing that every day 😄

[@LC-qi5ff]

Apparently some techs lightly heat the capillary with a blowtorch to soften the wax/debris clogging it

[@davidsanders6957]

🤫🤫🤫🤫 interesting

[@robgraham1204]

I have seen guys heat the filter drier when the cap exits has helped the fridge run for a bit to get them out of trouble

[@TheGhettoLobster]

I have tried this before and it does work sometimes

[@WswRefrigeration]

Yaaaa I hate pulling out sled for that reason. I cross my fingers as I’m pulling it in/out. Every inch im moving it im checking to make sure it’s not kinking etc.

[@LilyRoseElectric]

Do the Twist 🎉 nice job as always sir... 🏝🤙🏝🤙

[@tylerhvacrtekk4247]

I feel the same about the fieldpiece and measurequick app. You gotta have a connection for them to work and the FP app flakes out randomly and wont work again for days. I recently got the testo Gen 2 probes and the app is great. Basic, I can use it in a mechanical room where I have no data or wifi whatsoever, and you don't gotta pay for it. Hope they don't change that. Great video! I always wondered that with those movable condensing units

[@heavydiesel]

Good job finding that!

[@davejohnsonnola1536]

One two door but built in True I had ( in house work) snapped the line, went back in with a pair of stainless flex lines usually sold for mini split heads🙄

[@robgraham1204]

Smile you are on camera so is the fridge

[@BLUE_COLLAR_REFER]

I feel the same way about the probes I had. I had two sets and then after awhile the app was so bad I stopped using them. Ended up losing them and never replaced them and haven’t looked back haha. Compound gauges w a low lose on the high side FTW

[@pedrojardim325]

Dave Very interesting one Not easy ones to fine

[@sterlingarcher46]

That is a golden tech tip i outta remember thank you sir 👍

[@guybeavers6026]

When the Jarritos Mango turns from orange to slightly red you know you have a twisted suction line, rookie mistake😂

[@kelvinduongwa]

I came across a newly installed twisted suction line on a Pioneer 1:1 Split last Saturday up here in SJ also Dave. Guess we both got twisted suction line. lol

[@ntsecrets]

You need to do a Hack / Moe ‘24 ad. Breakin records for the USA.

[@topher8634]

He's a super tech!

[@DavesNotHere12]

My fieldpiece app was having me log in every time I'd close it, even for a minute. Eventually, I un-installed it, then re-installed. Logged in once, it's been ok since.

[@billj4859]

I agree about the fieldpiece app. Buggy as hell and needs to allow for manual input. Like the probes, but the app needs attention.

[@danwittels5542]

Tippy's a bad influence! 😅 Good find on that suction line. That's the kind of thing that would drive you bat shit if you didn't see it.

[@matthardiman9764]

Wow it was still working! That compressor could suck start a Harley

[@marcoferreira226]

I really like the testo app nice and simple, FP has better range and MQ you need to imput so much info for it to work, They all need a simple setting for fast measurements. Great find and will keep that in mind with the units that slide out. Im digging the elitech minis you've been pimpin those for a while,

[@davejohnsonnola1536]

@@marcoferreira226 scroll down to the "classic view" to avoid inputting or scrolling past the equip info

[@HardKnocks101]

Guava jerriros! The bomb baby!!

[@davidsanders6957]

Twistin the day away !! JUST A TWISTIN !!!

[@amoni1959]

Wow. Great find.

[@stevengilber1153]

Good Find...gonna have to file that in my brain

[@williamgeyer4389]

Gotta love the Jaritos😋

[@ronaldclark8187]

Thanks Dave

[@hvacshinobi8047]

I feel you with the FP app. Wanted to create a pdf report for a evacuation f an ac and it said must be connected to the internet to creat the PDF what a let down already switching to the testo

[@NorCal-refrigeration]

@@hvacshinobi8047 they dropped me back in the day when I bitched about the og app. I used to get gear. But I had to be honest 🤘✨🤘👊👊

[@stephenbullock-yn3vh]

Great work dave 👍✌️

[@lilpbass]

Persistence pays off my guy! Yes Fieldpiece app is lame

[@ronkurey5981]

Nice catch Dave!

[@tikipete8271]

No cerveza in that fridge, must be Michoacán

[@justicerefrigerationcallth1576]

😳 wow! Good find!!

[@davidsanders6957]

I BROKEN the loop coils on beer cooler pull out condensers, always seems like at the VERY END of the job, LOL

[@robgraham1204]

Yep not good Customer how's it going You .yeah done soon Then pssssssshhhhhh 😂😂

[@davidsanders6957]

@@robgraham1204 SICKEST SOUND EVER !!

[@NorCal-refrigeration]

@@davidsanders6957 always 😂😂

[@joeyf504327]

How do you bill that out? The failure was, as you said, from you pulling the condensing unit in and out. Do you cut any time out for you playing a role in the failure? Or still bill the whole thing?

[@NorCal-refrigeration]

@@joeyf504327 it was a free job

[@davejohnsonnola1536]

​@@NorCal-refrigeration what a guy...! Still, ran for ten months since last compressor change

[@sknight0391]

Good one Davey Gravey 😎👍

[@fers3t]

Turn off cellular data for the fieldpiece app. Works great with it off.

[@Taylor-bx8op]

I stopped using the fieldpiece probes after I got so frustrated with the dang app always wanting a login... back to old school

[@NorCal-refrigeration]

@@Taylor-bx8op I’m about there too

[@jamestoy3025]

Twist o flex

[@RT-qd8yl]

Someone needs to make a free open source app for accessing wireless probes and transducers and such. I'm sick of all the proprietary BS software we get roped into using in this industry.

[@Growzarktrail]

Sometimes instead of kinking, they will crack and start leaking.

[@OcRefrig]

Wow ! Talk about capacity loss & slowww to temp on a hot day. might still get to temp but take --- Forever !

[@joelmcneney5366]

Sir Tippins III

[@MariosACandRefrigeration]

nothing worse than trying to check s/h inside a walkin cooler and the fieldpiece will not connect,testo for the win.

[@Ericbakereb1]

Im not a fan of job link. Takes like 10 to 20 seconda to corelate to your screen. I had uei hub before them and they really werent bad. Nice and quick

[@harrydickson4575]

👍👍👍

[@thesilentonevictor]

Supertech move

[@tasman1950]

business for sale in NJ