Got a call for a true not cooling let’s take a look. If you would like to buy me a cup of coffee www.paypal.me/...
Пікірлер: 76
@raviyadav87433 жыл бұрын
You can check your compressor without fixing compressor terminal cover and tie with Cable ties 😃😃😃
@laskahvac6663 жыл бұрын
Uncle Dave lookin' 20 years younger holy crap!
@josephtramutola5923 жыл бұрын
I tap a key behind my license plate
@harrydickson45753 жыл бұрын
Nice job Dave 👍👍👍 New video of a compressor install 👍👍
@NorCal-refrigeration3 жыл бұрын
For sure.
@omarfahil16023 жыл бұрын
Hi how much is your monthly salary
@maxsantana16 ай бұрын
I’m the 300 like.
@hvacrtexas52813 жыл бұрын
When you first looked down at your shoes, I thought you were wearing UGG bedroom slippers. LOL
@NorCal-refrigeration3 жыл бұрын
Lol. Carhartt with composite toe. 🤘⚡️🤘
@throttlebottle59063 жыл бұрын
LOL
@sdsd42843 жыл бұрын
Surprise you didn't bring out the old faithful start cord .GURU
@NorCal-refrigeration3 жыл бұрын
I had was rolling the dice and decided to try the 3n1 since some have made a test cord with the 3in 1.
@rottiev2643 жыл бұрын
Smash the compressor terminal cover, then gently click in place 🤣🤣🤣
@NorCal-refrigeration3 жыл бұрын
Epic stuff. I do.
@gregbowman35983 жыл бұрын
Good one Dave, yeah put in compressor and door gasket
@Eddy633 жыл бұрын
Hey Super Dave , I watched your vid and NASCAR at the same time ... Yeah , I'd replace the compressor ...
@neilvestervictor1803 жыл бұрын
you so experience it looks butter getting this done
@timothydelgado49072 жыл бұрын
When getting door gaskets do you measure the door or can you use the model # on the unit
@NorCal-refrigeration2 жыл бұрын
Model and serial. If you have the RHS catalog you can take it in and find it also.
@sknight03913 жыл бұрын
Dave, I knew you were "that guy." 😉
@sknight03913 жыл бұрын
I had my fingers crossed for you Dave. 🤞
@NorCal-refrigeration3 жыл бұрын
Oh ya.
@bjsolo983 жыл бұрын
I thought you'd pull a compressor out of the vangina
@NorCal-refrigeration3 жыл бұрын
😂😂that would’ve been epic.
@uxwbill3 жыл бұрын
Sure, fix it right up...seems to be in decent shape otherwise.
@harryharding21233 жыл бұрын
Thought you were gonna show your slim jim
@harryharding21233 жыл бұрын
To get those keys
@NorCal-refrigeration3 жыл бұрын
😂😂
@milanlipovic73493 жыл бұрын
It’s finally playing
@RichGT350r3 жыл бұрын
Click Of Deatharooski!
@NorCal-refrigeration3 жыл бұрын
Good one.
@RichGT350r3 жыл бұрын
@@NorCal-refrigeration I knew you would like that one! 🤣
@IFIXCASTLES3 жыл бұрын
Fix it, the inside looks good.
@dmiestercommkitchentech30433 жыл бұрын
I would have checked for a leak due to possible oil loss caused compressor to lock up then decide on whether or not to fix it because after the compressor is installed to find out the evaporator is leaking also would leave a bad taste in the customers mouth this is because it has had a sealed system repair already ie.. the aftermarket filter drier
@shine-cg9uf3 жыл бұрын
? For u. High high of a microfarads reading do u go til the cap is toast ? On start caps I thought u look to keep the range in the middle somewhere between the ratings on cap. Ex 165uf - 269 uf . I'm a sponge 🧽 for learning. Thanks for sharing your videos 📹!
@NorCal-refrigeration3 жыл бұрын
There is usually a % on the cap that you can by.
@shine-cg9uf3 жыл бұрын
@@NorCal-refrigeration yes but if the microfarads is higher then the % rating can u still use it
@NorCal-refrigeration3 жыл бұрын
@@shine-cg9uf I was taught they need to be within rated % or replace them.
@shine-cg9uf3 жыл бұрын
Cool thanks !
@CKSChurch3 жыл бұрын
I'm glad they think you are cool, but calling you broke was a little rude IMO.
@WswRefrigeration3 жыл бұрын
We all want to be the “guy”
@Harrypizzalover3 жыл бұрын
Hey Dave do you use the go pro or the phone. I tried using the go pro but I set it up and the customer is like what are you doing , I said I tape it just in case so I can go back a see what I did , one asked me to turn it off 😂
@NorCal-refrigeration3 жыл бұрын
@@Harrypizzalover usually use my iPhone this one was the GoPro and some iPhone
@victorferreira94703 жыл бұрын
Impressive banana eating technique 🤔
@NorCal-refrigeration3 жыл бұрын
I was shaking it like a dong too. 🤘⚡️🤘
@kingofthecrease303 жыл бұрын
if its not working unplug it before the service co shows up...this way if you have the click of death and try to put on a 3n1 the compressor will be cooled down
@NorCal-refrigeration3 жыл бұрын
Correct. In the video I ohm out the compressor and the internal thermostat is reset. 🤘⚡️🤘✨
@EverythingHVACR3 жыл бұрын
Nice video man! Do you leave the 3 in 1 on if it works or go back with original start components? I know this varies by the person, just curious your thoughts I always lean towards installing new start components.
@NorCal-refrigeration3 жыл бұрын
I’ve had good luck with them. The shop I used to work for went oem
@arniegrote3193 жыл бұрын
I have a three and one 1/3 to 1/4 hp On a cheep extension cord six foot just to see if it will start, and i have a 1/2 hp for the bigger comp. Don't want to go through all the work of installing it if it doesn't start.
@NorCal-refrigeration3 жыл бұрын
I have a start cord I use. But had nothing going on after this call so I thought I’d try the 3 in 1.
@royamberg91773 жыл бұрын
I use an amp probe to see if capacitor is drawing current and run winding after I check the mfd
@jasonjoyner69403 жыл бұрын
What did I miss?! I was out riding my motorsicle...
@NorCal-refrigeration3 жыл бұрын
Yaaaaa get some. 🤘⚡️🤘✨
@optimeenergy28693 жыл бұрын
I got to get a hobby. I knew witch draw the 3 in 1 is kept 🤣😂
@terrytugwood78482 жыл бұрын
👍🤣🤣
@THEtechknight3 жыл бұрын
Careful showing your keys on camera! I learned the other day there are locksmithing apps that can copy/cut keys based on simple pictures of the key.
@throttlebottle59063 жыл бұрын
many of us could open that van in a few seconds tops anyway ;) but luckily the majority of us that can do so, wouldn't anyway. unless it was to save a "Dave" from having locked himself out :)))
@treverkirk81103 жыл бұрын
I love wagos
@hvacir91763 жыл бұрын
below what year you would not fix a cooler like that? 10 years?
@NorCal-refrigeration3 жыл бұрын
You can rebuild as old as you like. But at some point it’s less expensive to buy a new one.
@hvacir91763 жыл бұрын
@@NorCal-refrigeration thank you i thought there is a rule of thumb or something :D
@jimmyp54873 жыл бұрын
New pump 🤘🤘🇺🇸🇺🇸
@neilvestervictor1803 жыл бұрын
yea five years old is not that aged a compressor with drier and door gasket
@neilvestervictor1803 жыл бұрын
would you say you a hvacr tech or refridgeration mechanic
@milanlipovic73493 жыл бұрын
Wtf it won’t play it’s buffering
@ralphgiampietro853 жыл бұрын
What do I think I think you should have to check to see if it had gas in it compressor, door gasket, possibly flat =trashman..or quote if they prefer to fix
@electroimpex88973 жыл бұрын
First
@OcRefrig3 жыл бұрын
Good vid. I Would have Liked to see the unit actually drawing LRA current. Kit might not have been working ( I’ve never had a bad Kit ) but still like to see LRA on meter. I carry a stubby guage in my QSC bag & I would like to know if it had gas in it. Only 6 yrs old like u say. Prob has gas in it , but I can’t take any chances , if I do , I get bit in the axx. I would have also recovered any gas in it & snipped cap tube at drier & thrown some nitro in it to see if cap tube is pluggo or not if I’m going to bid a compressor job. Probably a good candidate for a compressor being it’s only 6 yrs old , but I still need to see if it has a full charge of gas in it. If not , time for the scrap pile.
@NorCal-refrigeration3 жыл бұрын
You can drive up and put your amp probe and gauge on anytime you like Phill 🤘⚡️🤘✨
@raviyadav87433 жыл бұрын
You can check your compressor without fixing compressor terminal cover and tie with Cable ties 😃😃😃