Trueing a grind wheel 1

This video is about trueing up your grind wheel to make it run smoother

[@ecrxft]

No clue what this is or how I got here but my left ear really enjoyed it

[@01mustang05]

Diamond truing hone tool is what I was looking for, Thanks.

[@E5Bobby]

Neat video. Thank you. I just dressed my grinding wheel today using that tool with the metal "stars" on it. I'm not a fan of that because it can't be held steady, i.e. it is only as steady as your hand can hold it and if your wheel is pretty out-of-round it causes your hand to bounce in and out which is obviously not good. So, I need to come up with something like a jig to hold the grinding device stead. Maybe I get a diamond tool like this one. Thank you for this video, John. Well done.

[@TheBJH2]

Just buy a ceramic dressing stick and you can dress the face and the sides of the grinding wheel and in doing so it also balances the wheel, also NEVER, NEVER use shims on a grinding wheel if you want to live.

[@DougHinVA]

I saw a video here by an experienced grinder instructor. He advocated using the 'T' handle diamond tool to gently remove a tiny depth of the grinding wheel face from each side.... so that the center of the wheel is left and it cuts the piece to be ground down (chisel blade, etc.) by passing the work side to side slowly. Less friction and more precise control of the work piece. The center 1/4 or 1/2 of the wheel face does the work and not the outside 1/3 of both sides of the wheel face.

[@minskmade]

smart...pencil trick...thanx for sharing

[@TheRealKirkHammett]

This video is another 4:18 that I can never get back of my life. Thanks for wasting my time.

[@onejedi66611]

thanks for the video, can I ask where you bought your tool rest jig from?

[@ramzanmughaljee]

Nice one Thankyou

[@6lr6ak6]

The tool used at 3:50 l made one same but l used a piece of Tungsten carbide out of a masonry bit and it worked great,have you tried using a piece of tungsten carbide?

[@samterian7694]

diamond point dresser is great for tool room grinders, where spindle has super precision bearings and no vibrations, on pedestal grinders a star dresser works better this is the opinion of a retired grinder.

[@stillbashingmetal]

Never, ever, put shim between the grinding wheel and the wheel flange plates. If the wheel is wobbling from left to right, it's because you either have deformed/damaged flanges or a cheap crap grinding wheel...or both. Throw them both away. Don't use a bench grinder without the wheel guard...they're fitted for a very good reason!

[@McAVITYourWay.]

You worried me there! You must NEVER use a bench grinder without the guards in place, especially when setting up a wheel (new or used) I know its a pain putting them on, then taking them off etc, but its more of a pain having bits of grinding stone removed from your body (If you survive the explosion) Shims are deadly! if you have a `wobble` try turning the wheel on the shaft an inch or two then re-tighten the nut! if that doesn't work take the wheel back to where you got it, and buy a better quality one!

[@moayadsaeed]

thank you very good.

[@tonydeleo7697]

Did you build the tool rest system shown in the video or is a factory unit? Thanks Tony

[@MikePeaceWoodturning]

John, how did you add your miter slot to the Oneway platform?

[@saravana009bb]

Super sir

[@MuellerNick]

I do have a cylindcrical grinder and a tool & cutter grinder (1 ton, no benchtop toy). And I do have a few diamonds, multi tipped diamonds and diamond tiles for dressing. Beside other dressers. But you could ask anyone who does **serious** grinding. The diamond has to drag.

[@seepaulrun113]

Thanks.

[@HotAire]

Alread put one post but KZbin must have moved it. I'll just put this for Lucas, John C. Read, Understand and Follow the Instructions before you have a Major accident. To many wanting to be Movie Stars post here that Do Not Know what there talking about. Charlie

[@jsmcguireIII]

I sharpen my pencils the exact same way he does.

[@radiusnorth1675]

Please be careful with your truing set-up. Diamonds are fragile and can easily be "shocked" and damaged. It would be safer and easier on your diamond if you pointed it "down hill" about 15 degrees below the wheels centre line.

[@jorgedelcid7695]

Me gusta la informacion

[@boltonky]

So what your saying is i need tool rests that are square to the grinder and then the tool to dress it that then has to be held square...and i thought trying to setup my lathe bed was complicated. Simple but not

[@MuellerNick]

Looks like Geiger doesn't know how wheels have to be dressed! The dresser has to point downwards, not upwards as shown. It would be right, if the wheel would rotate CCW. That thing is unsafe crap.

[@Georgeelhindi]

MuellerNick dude. Thank you

[@miguelcastaneda7236]

hmm dont know may be where camera was at but looks like your above center ....if so thats gonna give you problems as wheel gets smaller...gonna grab it again

[@user-bl2xj2ou5h]

Деревня!

[@spacemanrick2014]

You used your wheel guard as a tool rest, and didn't foresee it being pulled into the grinding disc? I appreciate the video, and including your mistake, but, you should have blamed that one on an "apprentice" you had to fire.

[@jhart8367]

Good video, but man I had to leave early. The mouth noises were really bothering me. But hey, at least I could hear you :) Thanks.

[@cncskill6578]

kzbin.info/www/bejne/bXetmnuGh9h-qNU The Best Way To Dress Grinding Wheel On Your Bench Grinder

[@buder5116]

1:13 lol someone just added a wacher >_> well dont trust that stuff

[@romelitomacalinao5687]

mAgkano po 250x32x32

[@tollertollertoller]

the sound is not working.

[@lornechan7548]

听不懂怎么办啊

[@simonp347]

多听就懂了。

[@CosgroveNotts]

As a qualified stone installer why are you fanning about like this. Just buy the Huntington stone dresser.

[@edstimator1]

I have one. It;s better used as a hammer.

[@deathcapt]

the mono Audio is killing me