Trying ghost pigments in my resin coasters!!!!! Video #61

[@barbaram5787]

So gorgeous. Being stuck at home I'm binge watching so many new ideas (for me). I want to try everything, lol.

[@SherryMoulton]

Thanks so much and thanks for watching 🥰 would love to see what you make 🥰🇨🇦

[@lullysmommyify]

Me too. Lol. Ive seen so many new and cool things

[@melimel9265]

me too, I buy all the stuff I would need then I never end up doing it. if I do its weeks later. lol

[@nancynorland260]

Beautiful...they are called beads, for jewelry or any other craft you need them for. I love your creativity, thank you for sharing. So much love.

[@dianestanley3304]

I Love watching and listening to your videos! You are GREAT. 😻😻❤

[@patcosta4117]

Great idea! I love the way the blue background shows through the flower

[@SherryMoulton]

Thanks so much 🥰 thanks for watching 🥰

[@SashasRevenge]

Thank you, I loved this video! They all are beautiful so honey, stop being so hard on yourself. The ghost pigment was a great idea!

[@SorayaZiziArtist]

Beautiful! Cool technique.

[@susananderson1071]

I've been watching videos from several coaster artists. This is my favorite. The finished product is pretty from both sides.

[@poohbearcomingatyou7581]

“I am special” I love it!!!

[@margaretdietrick5401]

Great tips. Your step by step demonstrations are great!

[@SherryMoulton]

Thanks so much and thanks for watching. Love doing these 😍🇨🇦

[@gbohn5641]

When I clicked on this video, I had no idea that it was one of your earlier tapes. After listening to it for a few minutes, I realized that it was, the famous, SHERRY MOULTON! I have the ability to remember faces and voices, but not names. So, in that way, Sherry, I'm special too. I've followed you for a year+. Love your videos. Sorry to hear of your husband and your deep freeze. I'm sure you'll make a ver cool 'cup' holder for your hubby.

[@KatieSanvick]

tip from one artist to another: try using plastic bottles with little nozzle caps- they come in all different sizes and when youre done you just remove the caps turn them upside down and let the resin drip out, and peel it out after it has cured then you can reuse them and you wont be using and throwing away so many plastic bags. beautiful effect by the way!

[@SherryMoulton]

Thanks so much and yes I have ordered some silicone cups I do have some of the little squeeze bottles I will have to try that thanks so much and thanks for watching 🥰🇨🇦

[@DAMArt-dq9vw]

Wow! Those are really beautiful!

[@SherryMoulton]

Thanks sooooo much 🥰

[@tinabuenzow9992]

That is amazing that you can put a cured piece inside a non cured piece and the meld together like one!!! super cool!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰 I thought it turned out pretty good 🥰🇨🇦

[@peggystearns5573]

These are gorgeous. Love the 3D look

[@SherryMoulton]

Thanks so much 😍

[@sandyhughes4694]

Sherry, I love these!! You have inspired me to try to make some for myself. Thank you!!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@patriciabrowning2262]

Turned out beautiful

[@pkotesky]

So pretty Sherry !!! Like always ! 👏👏🤩👏👏👏😍🖼💫👏👏🕊👩‍🎨😘

[@SherryMoulton]

Thanks soooo much 🥰 Happy Easter 🐇🐰🐇🐰

[@pattieholder3917]

Wow, they turned out beautiful!!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@Oonagh72]

🤩👏🏾👏🏾👏🏾👏🏾 just watching and realized “how am I not subscribed to this chic??” I have now rectified that.

[@SherryMoulton]

Lol welcome to my special world lol. Thanks so much and thanks for watching and subscribing 🥰🥰🥰🥰🥰🇨🇦

[@lullysmommyify]

Love watching to learn more about resin pouring. Thank you

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@Malak-gi3gu]

Love your video and your work

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

[@ellishansen8115]

Just found your channel. Those coasters are beautiful. The interference or ghost colors are fun to work with. I find they show up better on a darker background, like that gorgeous blue you have.

[@SherryMoulton]

Thanks so much and thanks for watching 🥰 yes I'm excited to play this them a little more 🥰🇨🇦

[@hanneromeike9786]

I just found your channel and I’m loving your work!!! So beautiful these coasters 😍😍😍

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

[@monamcculley219]

Really nice depth you got in these.

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🇨🇦

[@MonicaBarnesArt]

That’s such a cool idea love them❤️

[@SherryMoulton]

Thanks so much and thanks for watching 🥰

[@MindyDrummond1414]

These are gorgeous, I can't wait to try this myself. :)

[@SherryMoulton]

Thanks so much would love to see them when you do 🥰 thanks for watching 🥰🇨🇦

[@beverlyaten1775]

Wow just watched your channel for the first time. Oh yes! Gotta try this! You must be my long lost sister! 🌞❤️

[@SherryMoulton]

Thanks so much and thanks for watching 🥰 lol well hello sister 😍

[@debrasmith1592]

Gorgeous Sherrie, I love the ghosting

[@SherryMoulton]

Thanks me to was not sure if it would work. Happy Easter 🐇🐰🥰

[@cynthiacarr3294]

Awesome so unique Beautiful!😁💯

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@2INTUATIVE]

Nice job!!!...love the 3 D effect !

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

[@RinirocksArtistry]

They look great! Happy Easter!

[@SherryMoulton]

Thanks and Happy Easter to you as well🥰

[@conniemorgan9992]

Pretty pretty pretty!!!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@chelseaarlequin4812]

I was able to pick up a few containers of resin at Michael's. Try searching up resin specifically but if not try your local home depot I found resin there as well. Love your work🥰

[@SherryMoulton]

Thanks sooooo much I'm glad you found some..... Have fun creating 😍🇨🇦

[@carolnichols2692]

Impressive! The flip and no lip. Subbing!

[@SherryMoulton]

Thanks sooooo much and thanks for watching and SUBSCRIBING 🥳🥳🥳🥰🥰🇨🇦

[@lynnmariemoriarty9193]

So pretty!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@a.k.5423]

Great video and technique! Thank you so much!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@Sunshine-n1n]

I love your older videos too

[@ninamcrae7295]

might be a help if you make up clumps of your center for the flower ahead of time and let them cure,and then add them to the resin later when you start your project.

[@mookzmom]

Love this technique, and now I'm thinking a snowflake pattern in the white with the interference in it would be to die for!

[@SherryMoulton]

Thanks sooooo much 🥰 I'm just in love with these even with all my miss happenings hahahahaha 🥰🇨🇦

[@WayGemstones]

So pretty...

[@MrsCynfuller]

Beautiful and Happy Easter to you

[@SherryMoulton]

Thanks so much and Happy Easter to you as well 🥰

[@Sooz3112]

They are beautiful. I can't buy Castin' Craft in England but I'm using alternative pigment pastes..trial and error - I won't give up until I get it right x

[@gladyskiplimoart]

So pretty 😃❤️💙

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🇨🇦

[@gladyskiplimoart]

@@SherryMoulton you most welcome Sherry!!! Great job 👍👏👏👏💕

[@SherryMoulton]

🥰🥰🥰

[@DOESRightDesigns]

If you notice when you heated them with the heat gun they didn't move at all like they do on your newer videos so I think that it will work for you. When I don't want things to sink or move I wait till it's pretty warm before I start to use it.

[@SherryMoulton]

Thanks sooooo much next set I will be trying this 🥰🥰🥰 thanks so much for watching 🥰🥰🥰🇨🇦

[@secretsquirrel7374]

I don't know why but I love the sound of the coasters knocking together

[@SherryMoulton]

Thanks sooooo much and thanks for watching. Yes is does sound good lol🥰🥰🥰🇨🇦

[@artsabeach]

Beautiful! Was wondering, why not just do the blue layer first, let it cure and do NOT remove from molds. Then pour the clear/white/blue flower layer directly on top and let it cure, then remove from mold?

[@tsiraberger5360]

Looks amazing

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🇨🇦🥰🥰🥰

[@colleensmith5462]

love! can you show how you mix the white? please

[@SherryMoulton]

Thanks sooooo much. The white is 2oz of resin and 10 drops of casting craft opaque pigment that's it 🥰🇨🇦

[@istcian557]

Hey, sherry I am new to this field of resin art. Please explain few things if possible- 1 where we use pigments? 2 where we use alcohol ink? 3 where we use mica powder?

[@SherryMoulton]

I'm kinda new as well learning as I'm going lol. You can use any them anytime and I even mix them together. I find the mica power usually gives a non transperant colour. The alcohol is used when you want a little bit of colour. I also use acrylic paint when I want a solid colour. I think pigments are matt and the mica powders a shimmery. I hope this helps.🥰 Thanks for watching 🥰🇨🇦

[@istcian557]

@@SherryMoulton thanks..much clearer picture for me

[@SherryMoulton]

Glad I could help anytime 🥰🇨🇦

[@joycedavidson895]

I Luv these. I've gotta order some molds.

[@SherryMoulton]

Thanks so much 😍 and thanks for watching . I just put up my new one like this but pink's..... 🥰🇨🇦

[@charlottesills1174]

May I ask directions on mixing the white, also where did you get the white? Beautiful

[@rilanajansen2652]

Looks wonderful, but why not take yellow or Orange for the inside of the flower? Now the inside of the flower falls away becouse the outsider is the same color?

[@lindagray6029]

Beautiful.

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

[@lauriekerestes7840]

Hi Sherry, I am loving that you use a lot of canadian products. Have you tried the mica powders or pigments from Windsor plywood. The few that i have used are awesome!

[@margaretdietrick5401]

Beautiful

[@SherryMoulton]

Thanks sooooo much and thanks for watching 😍😍😍🇨🇦

[@karylgammon8760]

Awesome!

[@amiraclea9550]

What makes these flowers float and layer like that ??

[@katharinerutkowski6687]

Gorgeous

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🇨🇦

[@margaretrangel7110]

Great Job Sherry. I’d like to give a shout out to Julia Cutts, “Pouring Your Heart Cut” in New Zealand... she also does the floral coasters and generously shares her expertise. I loved the blue coaster in this video... it’s one of my favorites. Blessings!💙

[@yolettahall4003]

Beautiful 🦋🌹❤️❣️

[@JERZEE847]

Curiosity got me, had to see the blue ones also.

[@SherryMoulton]

Lol I got you addicted hahaha. Thanks so much and thanks for watching 🥰🥰🥰🇨🇦

[@staceymoten3202]

simply gorgeous. would have loved to see it in red.

[@SherryMoulton]

Thanks so much and thanks for watching. Well that could be done 😍😍😍🇨🇦

[@carolynmichal]

Love watching your videos. Thanks for sharing. Every time I try these I get an air bubble between the two layers. I press them down just a little - not too much. I swish them around. If my touch is to heavy the bottom layer comes up over the edges and I have a mess. Any tips or suggestions?

[@bethdibiase5804]

It's blue Pearl. Pretty ❤️

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🇨🇦

[@brittanydavis5597]

In another video you mentioned that the reason you got such a beautiful flower effect this time is probably because you heated the resin, how much did you heat it and for how long?

[@SherryMoulton]

Thanks sooooo much and thanks for watching. Yes actually it has to do with leaving your resin set for a bit. I now leave my resin set for 15 min before I start piping the white and it makes a huge difference. Once its piped you can use the heat gun to move it around but not for long. Hope this helps 🥰🥰🥰🇨🇦

[@brittanydavis5597]

Sherry Moulton thank you!!

[@margaretdietrick5401]

Very pretty

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@margaretdietrick5401]

you're welcome. I hope all of you in Canada are safe and well. praying that this pandemic Will be over soon. Until then take care ❤🙏!

[@SherryMoulton]

Thanks yes all is well here hope you are as well. Yes hopefully it will be over soon . 😍🇨🇦

[@vickieradford3498]

I know you were not sure what you did different with the blue ones.... the hole was a little bit larger because the circles are a little bit wider.

[@SherryMoulton]

Thanks yes I think your right. Thanks so much and thanks for watching 🇨🇦🥰🥰🥰

[@MrsCynfuller]

When I have extra left, I always have an extra little project to dump my extra resin in, a bookmaker or something

[@SherryMoulton]

Yes for sure.... I hate to waste the resin soooo expensive... Happy Easter and stay safe 🥰

[@MrsCynfuller]

A book-marker not maker lol dang autocorrect

[@SherryMoulton]

Lol I hate auto correct 🤣

[@MsCountrykitty001]

Beautiful! I tried this technique and ended up with air pockets on the bottom side when I put the flower top on creating the sandwich of the resin coasters. Any tips?

[@Kanchanrani1234]

Omg 😳 luk so Amazing ❤️👌🏻Waoooo Plz plz can u explain for Beginners. What we need & How many resin I mean measurements.

[@kategreenway1025]

Hi Sherry. Why did you take the flowers out of the mold vs pouring the blue onto? Thanks!

[@jessicamiranda7662]

Hi, thank you for the video. Im trying to do the same design as you did here. However having issues with the white resin. A little while after the design is completed, the white resin sinks and all the design blends together. Any tips on how to avoid this from happening?.

[@Pottedlady]

I tried your method of the double pour, first one worked fine, took that one out and did the second pour, well when I put the first pour on top, there was places that I couldn’t get the trapped air out so I have soft spots, any ideas what to do to fix it?

[@vickiwhite603]

Had that happen to me too, with my freezer.

[@donnayount2094]

Can you use primary elements in your resin to make coasters?

[@rolikku]

interesting what you did that the pigment`s resin didn't mixed with basic resin?

[@SherryMoulton]

Well I know that the casting craft opaque pigment white there must be some chemical thing lol Thanks so much for watching 🥰🇨🇦

[@tinaprocaccini4351]

Hi, I have subscribed to your channel, you make beautiful coasters

[@SherryMoulton]

Thanks so much 🥰 thanks for subscribing and watching 🥰🇨🇦

[@Kimmie978]

These are so beautiful! Maybe I'll be courageous and give it a try!

[@SherryMoulton]

Thanks so much go for it and please I would love to see how they turn out😍 thanks for watching 😍🇨🇦

[@andreshurtado9478]

Visit

[@andreshurtado9478]

N by

[@whereyoubeensyn8481]

Ok.....what do I do if the back doesn't attach all the way and there's an air pocket

[@janetolson4894]

What name is the glitter to match the fire opal please

[@SherryMoulton]

Thanks sooooo much and thanks for watching. The glitter is Martha Stewart Confetti glitter color fire opal. Now this was bought at Micheals Canada. 🥰🥰🥰🇨🇦

[@Sara-ql2bb]

Hi sherry I love your video and I am happy I found you .would you please tell me what glitter you used in the center of flower ? I try to find in Michaels but I did not find it .

[@SherryMoulton]

Thanks so much I'm glad that you found me🥰🥰 the glitter in the center is called confetti tubes now I got these ones at the Dollarama here in Canada . I know that micheals sells them but not sure about the colours. Thanks so much for watching 🥰🥰🥰🇨🇦

[@Sara-ql2bb]

Thanks sherry for response. What can I use instate conffite tubes ? I live in united state and I checked dollars tree and Michaels but i didn’t find it.

[@SherryMoulton]

You could use any glitter . I just had them on hand. Thanks 🥰🥰🥰🇨🇦

[@sylvialonghurst8745]

Fabulous

[@lisetapps824]

Hello, I loved your video and I found your superb coaster 💞 I have a question I live in Quebec Canada is there another product that I could find here to replace casting craft opaque white pigment ? thank you and i will continue to learn some tricks with you! thanks 💕

[@whereyoubeensyn8481]

If some of the bottom gets onto the top, do you sand it off?

[@SherryMoulton]

Thanks sooooo much and thanks for watching. Yes you can sand it off. 🥰🥰🥰🇨🇦

[@TracyD2]

I never played with epoxy. This video was recommended to me. I guess because I make soaps and such. Now I’m interested in other projects. 😩I’m crying because my house isn’t big enough for me and my experiments.

[@SherryMoulton]

Hahahaha I know the feeling to many things not enough room, time and of course money lol. Thanks so much and thanks for watching 🥰🥰🥰🇨🇦

[@ciomaria6137]

Fabulous work. What are the metallic curly-cues actually called? I’ve been looking for something like that and can’t find it.

[@SherryMoulton]

Thanks sooooo much and thanks for watching. They are called mini confetti tubes. 🥰🥰🥰🇨🇦

[@jenniferodell2681]

For your husband's pudding cup thing you are making use a rubber or silicone it will grip the cup better, maybe it is just a thought.

[@free13pink]

I have one question what this casting craft does together with rasin

[@gourdhead22]

Sherry have you ever tried a different color other then white. I ordered the white castin craft op but I got yellow and blue.

[@SherryMoulton]

Thanks sooooo much and thanks for watching. No I have it and I just recieved my new one its blue .so will be playing around with it. Hopefully it will be the same as the white. 🥰🥰🥰🇨🇦

[@judyortmeier4479]

Yes I’m from Alberta, we are doing real good! Live in the rural area nw of Edmonton about 50 Klms. Where do you buy your glitter and Black diamond hues? I’m kind of tired of having to buy from the US, sometimes it takes forever! Would like to get some suppliers here in Canada! You keep well! Going to try these just love the flowers!

[@SherryMoulton]

That's good we are safe as well . I get my pigments off of Amazon and the glitters I get from micheals.

[@shirellebryant8913]

@@SherryMoulton where can I find the molds. You make me want to do these

[@SherryMoulton]

I have these in my Amazon shops here are the links Canadian www.amazon.ca/shop/sherrymoulton USA www.amazon.com/shop/sherrymoulton

[@jw8453]

Beautiful Sherri, how long do you let your resin sit

[@jw8453]

Beautiful !! Do you let your resin sit, how long ??

[@I.am.crafttini]

i don't know if you answered this yet but what are the names of your fire opal glitter match??? and where can i find them ??? thank you

[@SherryMoulton]

The glitter is Martha Stewart confetti glitter colour is fire opal. Be careful you wont be able to buy just one lol its soooooo beautiful. Thanks so much and thanks for watching 🥰🥰🥰🇨🇦

[@deetanner7153]

the group of four look like chrysanthemums 💜💜💜

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🇨🇦

[@PattyPuckettPouringArt]

Very pretty Sherry. My top edge always has a lip. Does yours? How do you get rid of it?

[@SherryMoulton]

Thanks so much and thanks for watching 🥰 Yes this is why I tried it so both sides are smooth 🥰🇨🇦

[@katiewiserkrizek8055]

Can I ask why you pop them out and then put them on top of the background resin instead of just letting them cure and putting the background glitter on top? Just curious. Your coasters are gorgeous!

[@SherryMoulton]

Thanks for watching 🥰 I hate sanding so if I flip them both sides are nice and smooth......

[@katiewiserkrizek8055]

Sherry Moulton ahhh! Makes sense! Thanks!

[@SherryMoulton]

Not everything I do makes sense lol 🥰

[@katiewiserkrizek8055]

Sherry Moulton lol too funny!

[@harlemite221]

Sherry Moulton I love this. Thank you. Where did you get those large molds

[@annagray6491]

Love watching you create. Always lovely results. Can I ask a question please? Is that a 30ml cup you were using to put the initial resin in? Thanks!

[@SherryMoulton]

Thanks sooooo much and thanks for watching. Yes it is. 🥰🥰🥰🇨🇦

[@fatenmansour4640]

Hi sherry is that a tourch or a blow dryer?

[@SherryMoulton]

This is a heat gun . Thanks so much and thanks for watching. 🥰🥰🥰🇨🇦

[@bejohnson67]

where can the molds be bought plz

[@SherryMoulton]

Thanks for watching 😍 I bought these off of Amazon Canada here is the link amzn.to/2SypDdc

[@teresawarriner8812]

Put some charcoal in your freezer and basement it will absorb Oder's. Love the coasters

[@SherryMoulton]

Thanks so much smell is gone thanks goodness 🤮🤣🥰 Thanks so much and thanks for watching 🥰🥰🥰🇨🇦