Trying to Fix These FAULTY Items from eBay and Make a Profit! S1:E72

Рет қаралды 37,462

Joey Does Tech

Күн бұрын

Пікірлер: 43

@JoeyDoesTech 7 ай бұрын

JDT Merch is now LIVE for one week only 😁 Ends on 2nd June - joeydoestech.com/en-gbp/collections/001

@Tezz42 7 ай бұрын

Send the switch back tell them straight you've been in and components are missing 👍

@Adam-lt4fx 7 ай бұрын

That screen was fine btw there is just one trace broken that is what is causing that line.. easy fix for the display.

@a134-j2b 7 ай бұрын

you got scammed in the worst way i would have returned it on a heart bit and left a bad review that's why ebay sucks.

@stetofix 7 ай бұрын

Nice video. :) Because the short on the wifi is gone and the blue light appears for a very short time, I would consider the wifi and sb ok and would check the psu. It seems that the psu is failing in providing enough power at the start of the PS5.

@michaelmeux4137 5 ай бұрын

Dont like buying for parts or repair on eBay because times ive explained i pland on repairing the item only to have it come in mangled vs the repairable state on listing. Had 2 different sellers say they can snap the board in half if they wanted but they said it different ways.

@jaevlakul 7 ай бұрын

the wifi ic look like it have been on the grill for 40 minutes

@ajaks7636 7 ай бұрын

Hey, it wasn't a total loss, you repaired the 1 switch. Ebay really is a crap shoot. You'll get it next time. Great Repair (and attempts) and Video! Thank You. Also Thank You to Sally and Charlie. Good for Blue Mat Pat on, extended holiday. 😀 Sorry I can't support the channel more.

@Maherfix 7 ай бұрын

Hey joey I have seen on the ps5 bdm-033 board 2 types of wifi chip Model J20h100 or model aw-xm501 I dont know if this is issue you have on this console but i thought ill share this info 😄

@kylemcmahon24 6 ай бұрын

hi joey another great video ! can i ask what brand of solder balls you use ? i have tried my look with some cheap ali brands and they where no good and would not float onto pads on the ic i try to reball !! thanks in advance much appropriated

@JonasGobel 7 ай бұрын

21:18 the RT chip look like crack?

@uali23 7 ай бұрын

Would it work to change the ohm resistor to the other orientation to have 61gg’s work on the 69gg board you couldn’t fix in the past? Not sure how it works or if that would work

@anthonyhowson7165 7 ай бұрын

Are the tracks damaged where the USB port has been ripped off

@colelange6161 7 ай бұрын

What flux do you use? I need some good stuff rather than my 9 year old container! Thanks

@phillangstrom8693 7 ай бұрын

the 2 most common 3d printer brands that have issues with bad motherboards is the geeetech fdm line typically the m and t series and elegoo fdm printer power supply and main boards go bad so if your ever looking for something different to fix everyone in my geeetech Facebook group ppl are always asking where to get a replacement board since this company has bad customer service and if you can buy a board it takes 2-3 months to arrive so if you can fix some of those boards I'm sure you will find a buyer most common problems seem to be the power switching transistor for the hot end and the motor driver chips

@unleashhhthefear0113 7 ай бұрын

Hi joey just a quick question do u repair switches for us if i sent it to u mines got a port problem bent pins needs sorting mate would u sort it for me please if i sent it ? Thanks

@zagato1987 7 ай бұрын

I'm so sorry for You on 25:54! Rollercoaster of emotions on Your face made my day :D!

@gehx 7 ай бұрын

@JoeyDoesTech can you tell me what mount and arm you're using for your microscope? I have that microscope and need a better arm for it.

@anthonyhowson7165 7 ай бұрын

I went into my switch on not knowing what I was doing but managed to put it back together no issues at all with installing a modchip to i also put new shells on my joycons with no knowledge but there together to I'd upload a pic if I could I'm no computer expert but enjoyed going into my switch

@mirayanomi 7 ай бұрын

Have you tried a different psu?

@anthonyaviles8665 5 ай бұрын

have a link for leaded solder balls

@gizmo1252000 7 ай бұрын

its the journey that counts ,not the destination , and big shabba to stezstix fix :)

@anthonyhowson7165 7 ай бұрын

Play stupid games win stupid prizes made me chuckle

@Fazer_600 4 ай бұрын

So the PS5 has an ARSE chip? 19:27 - chip on the far left

@whollymindless 7 ай бұрын

The operative word in the intro is "attempt".

@LetsPlayKeldeo 7 ай бұрын

Profit or Loss is cool but I hope you can give the ps5 another try ! I love seeing things that are often not "viable" to fix due to time and money get repaired anyhow

@anthonyhowson7165 7 ай бұрын

Joey do u sell xbox one s disk drives I need 1 mine is completely dead but its the original drive with the same motherboard please

@phynx-victumterra652 7 ай бұрын

That is a replacement case, I can tell by the text so that is why the serial label was messed with

@dodgydruid 7 ай бұрын

H100? Is that haircut 100 :P :P :P

@TheSkaldenmettrunk 7 ай бұрын

The Switch seller clearly is a scammer.. poor, poor people.. non the less it made some content.. unfortunately it made Sally unhappy.

@flanderingmeandering 2 ай бұрын

What's next: season two obviously

@mikeled1754 7 ай бұрын

Why dont repair people write shorthand inside somewhere on what they worked on?

@TheSpotify95 7 ай бұрын

Yay, it's minus! But think on the bright side: I've seen that Nintendo Switch on your eBay store and it's up for £100, so if you do get that, then that's at least something to the total. :)

@wizzitech7504 6 ай бұрын

Love your video and your energy but you put effort and time on device that cost too much , you should try other devices like MacBook or laptop , you can get them cheaper and sold them at better price for better profit :)