TSPROF K03, Kadet and Blitz. Which One to Choose?

We have three sharpeners: Blitz, Kadet and K03. They are quite different and designed for different tasks. The main goal of this video is to help people who are not familiar with TSPROF sharpeners understand better the principle ideas of TSPROF K03, Kadet and Blitz, to show the difference between them and compare their techincal capabilities and help choose the right one for their needs. If you aleady own one, don't hesitate to leave your feedbacks in the comments below, because your experience will definetely help people make the right choice.
You can make an order on the tsprof.us
Also, you may place an order via this phone number: [phone]
or write us here: [e-mail].
You also can get in touch with our dealer in
USA:
www.statesllc.com/
www.gritomatic.com/
whitemountainknives.com/
www.omahaknife.com/
www.blueridgeknives.com/
statesllc.com/
Europe:
www.knivesandtools.com/
tsprof.eu/
sharpinator.de/
www.baterky-noze.sk/
www.slipespesialisten.no/
Australia:
zanvak.com.au/
Buy a professional sharpener tool with rotating mechanism: shop.tsprof.com
Subscribe to TSPROF KZbin channel: / tsprofsharp. .
Welcome to our Instagram: / tsprof_en
Facebook: / tsprofen
00:00 - 00:29 - INTRODUCTION
00:30 - 02:12 BLITZ
02:13 - 03:30 - KADET
03:31 - 05:41 - K03
05:42 - 05:50 - COMPARISON TABLE
05:51 - 06:35 - SUMMARY

[@aricschannel1]

I have the kadet pro. Sharpened my first three knives on it yesterday. So far I really like it.

[@martinmdl6879]

The Kadet Pro worked out perfect for my personal knives. I keep it in a small 12 inch long tool bag along with the essentials. Remove the rod and rod guide, disassemble the rod into two pieces, leave the rod guide attached to the rod. NO OTHER DISASSEMBLY. I bought a coarse Atoma 6 x 1 inch diamond for faster reprofiling. Also added a Janda 6 micron resin bonded stone for mirror polish. All stones are 6 inches so I never need to adjust the set screw for stone length. I adjust for height only once for the Janda polishing stone. Always try to use stones of the same length and height to minimize all the required adjustments. The Kadet Pro fits nicely in the tool bag, along with the 6 inch stones in a soft roll case, tools and diamond lapping fluid in a pencil case, electronic angle gage, 30X lighted magnifier, small towel to wipe up any mess. It is a great portable setup. I bought twice as much stuff than I needed, so hope this helps. I love the Russian quality and attention to detail.

[@TSPROFSharpening]

We're happy to hear that! Thank you so much!

[@ughmas]

very helpful comparison thank you

[@TSPROFSharpening]

Glad it was helpful!

[@Jy3pr6]

Thank you for the video. I have a few questions. Are there any mechanical differences between the k03 expert and the standard? Or do those only refer to packages? Are units from 2 or more years ago exactly the same as the newer one in terms of materials?

[@TSPROFSharpening]

Thanks for asking! As for differences between K03 Expert and Standard 2021, there's a few: Expert has a wider angler range and Standard comes with a steel stand, but Expert doesn't. Here's a video with a table of comparison, just find a chapter with K03. kzbin.info/www/bejne/pqKadppppqeFpcU&ab_channel=TSPROFInternational Regarding to the previous units. Yes, they made of the same materials, all of aluminum, except the latest one - K03 Pro Hunter, there's a linfting unit made of polyacetal. Hope, it helped.

[@Jy3pr6]

@@TSPROFSharpening Thank you for the response. Is the expert compatible with the steel stand? I see you have the standard on sale right now. I’m puzzled at how the standard can be so much cheaper than the expert when it comes with the base and the difference does not seem so significant. Also, could you tell me the major differences between the K03 and K02? Thank you 🙏🏼

[@joseantoniosantos2369]

vc poderia fazer um sorteio de um desses, não temos no Brasil, os preços devido ao valor do dólar é difícil de comprar, parabéns pelo conteúdo. abraços.

[@TSPROFSharpening]

Thanks for the feedback. But I don't really understand which one you're talking about.

[@sharpfactory3705]

Hello, I own a sharpening business and im looking for a sharpener to sharpen with on my instagram and tiktok. The kadet pro seems like an good Option but i want it to sharpen mostly higher end pocket knifes up to 15cm blade lenght, is there an option for thinner clamps to sharpen smaler knifes also ? Greetings

[@TSPROFSharpening]

Hello! You can additionally get filet clamps for Kadet, they're are more thin and with reduced angle. Not sure if they''re available now 'cause that depends on where you are. Please check on that on our website. Thanks!

[@logansundheim4409]

Is the K03 as good at sharpening smaller knives like pocket knives as the blitz or kadet?

[@TSPROFSharpening]

Sure thing! K03 is just more a professional and multitasking tool.

[@michelt4390]

Only 30mm blade width for the Blitz pro? - so it's not suitable for most chef knife?

[@TSPROFSharpening]

We wanted to say it starts from 30 mm and up to 70-80 mm

[@RandomFun107]

I have the old KO2 that came in the wood crate. I really need to upgrade to something easier to transport lol

[@TSPROFSharpening]

Unfortunately, we don't currently have other options

[@Ike-Mi]

😍😍😍this is like bentley compared to honda spiderco sharpmaker

[@TSPROFSharpening]

🙌😎

[@stealthmanofthewoods2570]

europe is no longer delivered for universal scissor table accessories and stones , i tryed at kniv and tools it is no longer possible

[@TSPROFSharpening]

It's temprorarily. Now we do our best to establish a supply of goods again 🙌

[@tonnynijholt7090]

He man. With the Kadet Pro you talk about big knives up to 300mm. Does this mean the complete knive or the blade length? And will all Victorinox blades fit like the Classic SD 34mm blade or only the bigger 85mm+ models?

[@tonnynijholt7090]

I"m sorry, should've watched the whole video first. I already see that is max. ''blade'' length when you talk about the 300mm on the Kadet. It doesn't state a minimum length, except for the K03?

[@szilardfineascovasa6144]

The angle sizes I guess are inclusive (the sum of both sides), not just on one side - or?

[@TSPROFSharpening]

Per side :)

[@szilardfineascovasa6144]

@@TSPROFSharpening Thank you.

[@mongxiong4977]

Can the ko3 sharpen smaller pocket knives?

[@TSPROFSharpening]

Sure thing!

[@mongxiong4977]

@@TSPROFSharpening thanks guys was really stressing about it handling smaller knives since the clamps look bigger but I just order one and should be her on Friday!

[@6666tank]

Have you tried serrated bread knives

[@TSPROFSharpening]

We haven't yet come up with something for serrated blades.

[@Platoface]

I just wish I had a dull knife to sharpen now. No one tells you about that. Sadness.

[@TSPROFSharpening]

😀

[@stealthmanofthewoods2570]

l'europe n'est plus aprovisionée il ne faut plus acheter cet affuteur ,vous n'aurez plus les pierres de rechange ni la table universselle pour affuter les ciseaux ,j'ai essayé d'acheter la table a knivand tool et il leur est impossible de les livrer

[@TSPROFSharpening]

Cela prend quelque temps. On fait de notre mieux pour les recuperer un Europe ✊

[@michelt4390]

Le type de pierre utilisé est facile a trouver, et disponible de plusieur fournisseurs

[@MinkieWinkle]

product gone from about 300 per to almost a grand. It's good, but it is not that good