How to install a Diode & LED Flasher Relay on a 2001+ Suzuki DR650 SE/S by TST Industries

[@fonetikus]

Made a huge difference installing the relay and the diode after the LED turn signals upgrade . Started using my turn signals again. Thanks for fast shipping !

[@joereed7326]

Man i just done this on my grom ,rear led worked fine whith diodes ,but the front just stayed on ,got the led converter,and the front worked ,but this accurately explained wye ,cheers bart☘☝️

[@TwoTubesADV]

Will this diode and relay work with any led indicators? Looks super easy to do 👍

[@TSTindustries]

It's tough to confirm functionality with every set-up available due to differences in technology, but this should be a fairly universal solution.

[@emfl4437]

Thanks for the info, just placed an order

[@TSTindustries]

Great! You're welcome.

[@PissTakeProduction]

Will this work on the DRZ400E Australian model. I have all four LEDS flashing at same time. LED relay is installed so flash rate is good. Just need to know of this works on the DRZ400.

[@TSTindustries]

Unfortunately we do not have a drz400E model here in the USA so we have no way of verifying an absolute answer to your question. Your symptom description fits the problem that this diode mod kit combats, but I have no way of knowing if it will work in just plug and play fashion. Before you purchase this kit I would like to see the bundle of wires and it's connectors under the headlight shroud. What you see in this video as far as electrical connection goes is what I would need to see from your bike. There is no way to send photos through YT so you would need to reach out to us through support portal on our website. If you do that just throw a note in there that you were conversing with Bart about this through KZbin so the message and photos get in front of my eyes.

[@PissTakeProduction]

@@TSTindustries ok thanks I'll take a photo of the plugs. From what I see they are the same as the DR650.

[@jadinwemette8251]

You could get them to flash separately again by pulling out the bulb in the signal spot of the dash. Without a relay this is a quick solution.

[@PissTakeProduction]

@@jadinwemette8251 All good added resisters to each blinker.

[@cameron4817]

Hi i got 2 leds at the back but the front is the stock oem lights but the front is hyperflashing and the rear 2 are very dim slow flashing. How do I fix this?

[@TSTindustries]

There is not enough information contained in your unquiry for us to analyze your problem. Please contact the ustomer support portal on our website. The guys there will get more appropriate information from you regarding wiring scheme and connection means of your signals and any other equipment connected to that circuit.

[@damascusautostop7381]

What do we have to do on a 1997 Dr650?

[@TSTindustries]

We have not had the pre-2001 model in the house. Good chances the relay and diode mod are the same but I cannot verify that without getting that bike in here.

[@damascusautostop7381]

@@TSTindustries I'll see if I can tell if there is a difference and let you know.