Tuning and installing Headers/Exhaust on the 240Z

  Рет қаралды 23,917

Hooligan Motorsport

Hooligan Motorsport

Күн бұрын

Пікірлер: 39
@skip741x3
@skip741x3 4 жыл бұрын
I had a 72 240z as a kid and remember working with these twin carbs! looking at these today ,with how advanced cars are is a trip! Mine had points in the disty as well... what a flintstones mobile, but man, I loved it at the time and thought it was the sportiest,coolest thing ever... mine cost 800 bucks and had 150,000mi.. it was an east coast car and had more rust that it had solid metal..that engine though was Soooo easy to work on an acess Everything ...Todays cars are a literal nitmare
@mericavids
@mericavids 4 жыл бұрын
The header and exhaust looks and sounds great. When I had a '73 I put headers on it and drove it a few miles at night. The ditches were a glow from the flames shooting out. I then took it to a shop and had true duals with a H pipe installed with dual glass packs pointing up under the rear bumper. No car alarm was safe when I rolled by
@bryanmchugh1307
@bryanmchugh1307 7 жыл бұрын
I freaking LOVED this video!! This thing sounds like a damn WW2 Spitfire!!
@polishjerry5474
@polishjerry5474 3 жыл бұрын
Nice and thorough man, keep up the good work!
@steveo6453
@steveo6453 3 жыл бұрын
Great channel, new sub, Dialect and vocabulary spot on!!
@Speewack
@Speewack 6 жыл бұрын
I am impressed that you removed the intake without taking the air box off of the carbs first. I can't reach the studs with the air box on.
@JaeyHill
@JaeyHill 7 жыл бұрын
If I ever get a Z project, I want you to work on it!
@MySuperky
@MySuperky 7 жыл бұрын
Do you have a link to that carb synchronizer and needles?
@wonsliqsunofabitch
@wonsliqsunofabitch 7 жыл бұрын
Come on man...safety glasses...metal flakes in the eyes...ain't nobody got time fo dat!
@Sickstringfarm
@Sickstringfarm 7 жыл бұрын
Sounds fantastic
@edcain3676
@edcain3676 7 жыл бұрын
Might Want To Consider Either Wrapping the HEADERS Or Ceramic Coating Them to Prevent Vapor Lock,W/ the Std.Non Elect.Fuel Pump.HEADERS Generate A Lot of Extra HEAT IN ENG.BAY.MY 76,W/ Elect Pump,Even Vapor Locked Occasionally,Till the Fuel Line Was Protected.
@Kbob3985
@Kbob3985 6 жыл бұрын
Those look like the allegedly ceramic coated headers that MSA sells, I got the same ones
@dawkinschmidt3921
@dawkinschmidt3921 4 жыл бұрын
Don't wrap headers if you want them to last they will gain some performance from heat Scavenging but if they get too hot they can melt inside and even completely destroy themselves and most companies won't warranty wrapped headers
@JorgeLopez-xn1xe
@JorgeLopez-xn1xe 7 жыл бұрын
Awesome as always
@gman9731
@gman9731 7 жыл бұрын
if u upload more videos for sure u get 15k subs by the end of the year
@poyocurry3053
@poyocurry3053 4 жыл бұрын
Were you able to put the heat shield back on? Curious. Thanks
@HooliganGarage-650
@HooliganGarage-650 4 жыл бұрын
Yes The heatshield still fit on.
@XionAzura1
@XionAzura1 5 жыл бұрын
Looks like Pacific Grove.
@cesarvldz29
@cesarvldz29 7 жыл бұрын
Hey man if u ever sell the su plz hit me up I need the balance tube off a 240 so I can get my z running right thanks
@ThompsonBMXbikes
@ThompsonBMXbikes 7 жыл бұрын
That was awesome! Would you put the same brand of headers on a 280zx?
@HooliganGarage-650
@HooliganGarage-650 7 жыл бұрын
Absolutely. They are great headers
@MrGreenJelly
@MrGreenJelly 7 жыл бұрын
How much did you get that S30 for?
@HooliganGarage-650
@HooliganGarage-650 7 жыл бұрын
It was $2600
@MrEvolutionise
@MrEvolutionise 7 жыл бұрын
where did you get the carb synchroniser and the needles?
@HooliganGarage-650
@HooliganGarage-650 7 жыл бұрын
Both on ebay.
@mdankewich
@mdankewich Жыл бұрын
Safety glasses???
@HooliganGarage-650
@HooliganGarage-650 Жыл бұрын
lol
@ThompsonBMXbikes
@ThompsonBMXbikes 7 жыл бұрын
How are those headers holding up? Did they turn white or crack?
@HooliganGarage-650
@HooliganGarage-650 7 жыл бұрын
They are still holding up perfect. Coating is still in tact, no cracks or warps, and no gasket leaks.
@quarterblacktravis
@quarterblacktravis 6 жыл бұрын
You need to weld that shit step your game up
@HooliganGarage-650
@HooliganGarage-650 6 жыл бұрын
Still holding up and leak free as of nearly a year later.
@ferdinand2506
@ferdinand2506 7 жыл бұрын
Mate you should be wearing gloves, glasses, ect
@CoolGuyClub
@CoolGuyClub 6 жыл бұрын
nerd
@luuklugtigheid1867
@luuklugtigheid1867 7 жыл бұрын
Put ITB's on it ;)
@HooliganGarage-650
@HooliganGarage-650 7 жыл бұрын
Wait and see ;)
@luuklugtigheid1867
@luuklugtigheid1867 7 жыл бұрын
Hooligan Garage​ nice ;)
@ATLMax84
@ATLMax84 7 жыл бұрын
don't know if you've looked into the carbs any further since you uploaded this, but this channel has a great video explaining how they work kzbin.info/www/bejne/p2rHp4GqlpqDa6c
@Schlipperschlopper
@Schlipperschlopper 3 жыл бұрын
Sadly from 2030 on all combustion cars, trucks and busses including classics will be banned from public streets in entire EU and Scandinavia :-( In Germany the Green Peoples Party gave order to shorten fuel supply from 2025 on by reducing petrol stations to only one state operated central gas station per city. From 2027 on in the EU certain car spare parts will be banned too....as exhaust systems, turbo chargers and even some engine and gearbox oils...California and New York will do the same from 2027 on.... So no investments should be done in oil burning cars any longer....They even created a completely new kind of crime here, called emissions- and smoke crime.
@markwilson8985
@markwilson8985 Жыл бұрын
Well that make sense. Im sure China and every other developing country is NOT doing that. Burn em, If ya got em!!
How to remove the Engine from a 240Z - Step by Step Explained
9:31
my mechanics insights
Рет қаралды 261 М.
Tuning a Datsun 240Z That Won't Rev
10:50
This Week With Cars
Рет қаралды 75 М.
Vampire SUCKS Human Energy 🧛🏻‍♂️🪫 (ft. @StevenHe )
0:34
Alan Chikin Chow
Рет қаралды 138 МЛН
Хаги Ваги говорит разными голосами
0:22
Фани Хани
Рет қаралды 2,2 МЛН
Installing Headers | Datsun 280zx Build
6:30
The Left Pedal
Рет қаралды 7 М.
Datsun 280z Ep.25 Installing the MSA Header
11:50
Restoration For Beginners
Рет қаралды 10 М.
Installing ITB's on the 240Z!! Weber 40DCOE
11:06
Hooligan Motorsport
Рет қаралды 75 М.
1979 280ZX Intake & Exhaust Upgrades
22:20
Hooligan Motorsport
Рет қаралды 9 М.
Porting & Polishing Datsun 240z Combustion Chambers
3:51
Kanga Motorsports
Рет қаралды 21 М.
SU carburettor Baseline & Initial Adjustments
27:16
D3Sshooter
Рет қаралды 140 М.
Removing the Dash and ALL Wiring from the 280Z
7:56
Windows Down
Рет қаралды 6 М.
How To Modify A Datsun 240z & 280z
9:12
MartiniWorks
Рет қаралды 12 М.
Removing SU Carburetors - 240Z Carburetor Guide Ep. 2
12:38
ZCarGuide
Рет қаралды 10 М.
How to install pistons, cylinder head, and timing chain in Datsun Z engine
18:56
Cars, Bikes, and Coffee
Рет қаралды 42 М.