Tuono V4 1100 Factory SC Project SC1-R Exhaust

Installation and sound clips

[@Sinkerbist]

that's my dream set up. 19 factory tuono with SC1R. sounds absolutely incredible

[@tpjpredator]

It looks great on this bike and has a very good sound. I have the same but from the 2021 model and I'm also going to ride a sc1r. good curves

[@marcox8810]

Absolutely gorgeous !

[@KUKI_de]

nice sound mate I recently installed the SC-project on my BMW. Really like it!

[@MikeDiesel67]

That thing sounds so good.

[@yashgawade5066]

You just made my day 😌😢 love from India

[@goomaa88]

looks very nice, blend with the bike

[@riderxtrackdays3418]

Sounds awesome. Save that dB killer if you go to NCM. You'll need it with their sound restrictions.

[@jimpalecek7053]

Thank you so much for turning me onto CBC. Those instructions were a little misleading for the top mount but I figured it out. The one with the screw going in backside is for if you are keeping the passenger pegs(there's a thread in back if you look) and the one from the outside is if you are using their bracket. Aha!! Excited for the upmap too since I won't have to trailer it to the dealer for the throttle learn. Now I'm hemming and hawing over the carbon versus titanium can. You like the carbon so far?

[@cwhitty05]

Thanks, that’s good intel on the mount. I didn’t catch that. I’ve seen many pictures of the titanium/carbon can and while I think it looks good, I love the carbon can! I’m a sucker for carbon fiber though, especially matte carbon fiber and not the glossy carbon. I can tell you the carbon can looks better in person than on camera. It’s a very high quality piece. I don’t think you could go wrong with the titanium though. It’s still a sexy muffler.

[@Mr-Mustard]

That cat is munching real good. (background 19:05)

[@cwhitty05]

She loves her Meow Mix for sure!!

[@popwatch905]

Passenger rearset. Nice.

[@mtmatt8958]

Beautiful machine bro👏🏼

[@MillerMotoring]

Click 22:55 over and over! :)

[@uonlyliveonce]

Great looking exhaust, sounds great too. Have you fitted the race ECU or got the bike remapped/tuned as will be running rich with slip on.

[@cwhitty05]

Thanks for watching! I love the way this exhaust looks and sounds. Check out my latest video, just uploaded today where I flash the ECU with the Aprilia race ECU mapping. kzbin.info/www/bejne/eZjLZ4uOjLGihcU

[@uonlyliveonce]

@@cwhitty05 Thanks for reply. Expensive upgrade but worth it. What did you do with the exhaust servo cables? Thinking of going down this route with my 2020

[@cwhitty05]

@@uonlyliveonce I removed the cables the first day I bought the bike. They are routed through the frame on the right side of the bike up to the servo. I kept the servo plugged in, just removed the cables from it. Just make sure you safety wire the exhaust valve open. I’ve heard the spring pressure isn’t strong enough to keep the valve closed at the higher RPM, and you will lose top end power.

[@freshfruit23]

Any modification to the inlet or exhaust that makes it flow better will increase air flow, so it will be running more lean if anything.

[@whitelightning5167]

Sounds good my man!👍

[@6122-e1y]

Nice setup, not sure what state you're in but I would blur that speedometer... just in case.

[@motogen24]

hi, did you remove your servo cables? how come the check engine light did not turn on?

[@cwhitty05]

I removed the cables, but I left the servo plugged in and installed. The ECU doesn’t know any difference if the cables are removed. Once you get a flash, you can then unplug the servo and remove it.

[@michaelfrascati7610]

That video put a smile on my face! I want to go with SC Project for my 2021. It comes in 3 lengths, which one did you choose? It looks like the medium length to me? It’s pretty loud w/db killer removed!

[@cwhitty05]

For mine, they didn’t have the option for different lengths, so I’m not sure what size I got. It was surprisingly loud with the DB killer removed! It was glorious!

[@michaelfrascati7610]

@@cwhitty05 TY! I subed btw.

[@pgp9546]

😍😍😍

[@MrHappy-oq7ot]

well at least use the db killer when commuting in cities,its easy to swap it in and out,ull be loud enough for cars no worries :P

[@colin55594]

Looks better then akrapovic

[@cwhitty05]

Sounds better too! The Akrapovič is only slightly louder than the factory exhaust.

[@colin55594]

@cwhitty05 Cant decide. I don't want it too loud cause of cops and neighbors. How much louder then stock is this?

[@cwhitty05]

@@colin55594 it’s quite loud! Not as loud as the little shorty pipes that SC Project and others make, but much louder than stock. Your neighbors won’t hate you as long as you aren’t coming or going in the night, and you have to refrain from revving it. I don’t find it too loud. It’s plenty loud enough without being annoying.

[@tadhgoshaughnessy6612]

what did u do with the cables u took off the old exhaust 😮😮

[@cwhitty05]

Threw them in the trash 🤣🤣

[@tadhgoshaughnessy6612]

@@cwhitty05 I mean I didn't see u take the whole piece with it .did u skip that bit daaaaa

[@cwhitty05]

@@tadhgoshaughnessy6612 I removed the cables the day after I bought it, so that wasn’t part of this video.

[@juicer404]

I thought db welded in? I just bought one for ktm 1290 but ppl putting videos up saying u have to drill it out

[@cwhitty05]

Nope…pounded out. Took some force, but it’s press-fitted so it doesn’t rattle or leak when installed.

[@juicer404]

@@cwhitty05

[@juicer404]

@@cwhitty05 Says here Uve to drill from outside, my bike Euro 5 , urs prob euro 4 different

[@cwhitty05]

@@juicer404 no drilling required for mine. I literally tapped it from inside with a rubber hammer. Took a few good whacks, but no drilling required. Not sure about the newer SC Project exhausts or if they changed them on the newer bikes.

[@cwhitty05]

@@juicer404 one other thing I was just thinking about, is why would a company make a muffler and then weld in the db killer? The whole purpose of it is to be able to remove it and put it back in. If they didn’t intend on it being removed, why even build it with one? It can’t be for emissions. These pipes come with documentation stating that they are for off road use only. SC Project also makes a version with a catalytic converter that is street legal. Maybe that’s the one with a DB killer that isn’t intended to be removed and welded-in? I can’t say for sure. This is just me speculating.

[@jerryx2000]

do you still own the bike? Does it burn oil?

[@cwhitty05]

I don’t, I sold it back in the fall. It did burn a little oil, probably 1/2qt between oil changes. Nothing excessive.

[@jerryx2000]

@@cwhitty05 why did you sell it?

[@cwhitty05]

@@jerryx2000 I decided riding on the street wasn’t worth the risk anymore. There are only so many times one can get away with hitting blind 35mph corners at 75mph, or tripling the speed limits before something terrible happens. Too much to lose. I’m in the market for a track bike now. Probably a R6 or ZX6.

[@jerryx2000]

@@cwhitty05 I had the 05 ZX6R. An amazing bike

[@cwhitty05]

@@jerryx2000 ‘05 was a great year for bikes! My dream bike was the ZX10 from ‘05

[@SrApple97]

Nice Bike, great work! which company is that license plate holder from? :)

[@cwhitty05]

Thank you! It is from Evotech.

[@Soulvinum]

I prefer the yoshimura sound

[@stuartstogdill2406]

DO NOT USE WD40 on exhausts!!!!!!... it will change the color of the piping once heated. Use acetone!!!

[@cwhitty05]

I like how it does that, actually.

[@TheChaz81]

​@@cwhitty05 Exactly! Isn't that the point of using WD-40 on titanium?😂

[@starter1980]

Made in Italy!

[@motino_motovlog]

If you use a Exhaust like this in Germany 🇩🇪 the Officer put you in Jail and put the key in an trasher 😅 Good explanation 👏 Biker greetings from 🇩🇪

[@ronjaheins9137]

Could I use this exhaust on a benelli bn 125?

[@cwhitty05]

Probably not 😂😂

[@supernova8715]

Always preferred aprilia’s v4 sound than ducati’s v4 sound but ducati is faster

[@cwhitty05]

I love the V4 Ducati too. They sound good but I agree, the Aprilia sounds better. I’ve been toying with the idea of getting a new Panigale V4S but can’t justify the $32k price tag.

[@supernova8715]

@@cwhitty05 I've looked every exhaust of ducati v4 and always sounds not menacing for me unlike rsv4 slap any kind of exhaust and sounds good.

[@cwhitty05]

@@supernova8715 exhaust systems for the Ducati are brutally expensive too. $5k US for an Akrapovič!!

[@supernova8715]

@@cwhitty05 true that man. Hey ride safe and i already sub.

[@TUONOv4]

Faster? Much higher price, maintenance and expensive mods. I’ll keep my Aprilia. 🤘🏾

[@jdesmo1]

looks great, but too loud.

[@cwhitty05]

It is very loud! Louder than I expected. Akrapovič would probably be a bit quieter. The SC Project does sound really good though. I’m happy with it.

[@adrianruckborn9188]

Da müsst ihr Amis n Video erstellen wie man einen Auspuff anbaut da euch das wohl zu kompliziert ist😂😂😂😂😂😂😂😂

[@cwhitty05]

Sie haben diesen Kommentar wahrscheinlich auf Deutsch geschrieben, weil Englisch für Sie zu kompliziert ist. 😂😂😂😂😂😂😂😂 Eigentlich habe ich das Video erstellt, um Menschen zu helfen, die nicht mechanisch geneigt sind und lernen möchten, einen Auspuff selbst zu installieren.

[@adrianruckborn9188]

I dont have a Problem wirh English Language.But when Americans Talk German Names,thats katastrophic.The Germans can netter Speak English,but The Americans don't even make a little effort to be able to speak German. Und auf Deutsch. Die meisten Biker können eh nicht mehr Schrauben,sie bekommen nicht Mal die Kettenpflege hin,da Biken ja mittlerweile "IN" ist,und es schick ist n teures Motorrad Zuhause stehen zu haben was man nicht Mal ansatzweise so Bewegen kann wofür es Gebaut wurde.Da wird der Bock dann zum Auspuffanbau zum Händler geschoben .So sieht's aus Da wird so ein Video auch nichts dran ändern.Zu 80% fahren nur noch Pansen Motorrad,die Glauben sie Kaufen sie Sportlichkeit beim Händler gleich mit.

[@dickheadcentral6974]

Anyone know how much louder this is than the akrapovic

[@cwhitty05]

I haven’t heard one personally, but I’m told the Akrapovic is not very loud. Slightly louder than the stock exhaust. This is significantly louder than that. It isn’t obnoxious, but it is very loud.

[@dickheadcentral6974]

@@cwhitty05 done deal I need one