Turbo Install and Exoskeleton on my hayabusa citicar!!

i'm bulletproofing my hayabusa car for all the boost!
store.schnitzr...
➥ 🔥MERCH: tinyurl.com/w3...
➥MY WELDERS: usaweld.com/?r...
➥ CUT OFF WHEELS (Code: VASILY 10) tinyurl.com/h4...
➥ EVOLUTION Power tools (Code: Vasily5) tinyurl.com/3j...
➥LASER CUTTING SERVICE: bit.ly/vasilyb...
➥PATREON: bit.ly/47gB9Pa
➥ SECOND channel: tinyurl.com/yw...
➥ PAYPAL: tinyurl.com/3v...
➥ INSTAGRAM: tinyurl.com/yv...
➥ 🎵 Music: tinyurl.com/zz...
Cheap Vs. Expensive go kart (FInale):
• Cheap Vs. Expensive Go...
Turbo Hayabusa raptor first street pulls!
• Turbo Hayabusa raptor ...
Street racing my crosskart the cops pull up!
• Street racing my 600cc...
R6 swapping Raptor quad in 24 hours!
• R6 Swapping Raptor QUA...
Banshee swapping my dirtbike in 24 hours!
• I Banshee Swapped my D...
Homemade 600cc Buggy Officially STREET LEGAL! (16,000 rpms)
• Homemade 600cc Buggy O...
The Worst motorcycle I ever bought! (1973 Yamaha RD350)
• The Worst Motorcycle I...
I got a Scary GSXR 600 Powered Chinese buggy from a subscriber!
• I got a Scary GSXR 600...
4x4 110Hp Vintage RACING Lawn Mower Build!
• 4x4 110Hp Vintage RACI...
For all inquires email me vasily1fab[at]gmail.com

[@xelimtb1452]

Best custom vehicle build Chanel on KZbin 🔥

[@Tatebrothersinc.]

Honestly think he needs to do a collab with grind hard to make something insane

[@GTIFabric]

It's pretty slick but you might want to expand your horizons

[@sethcrawford6219]

I agree

[@MaldonadoMoto]

FR

[@darkgoat1546]

Are you Seen the 1000tipla of vilebrequin ? Not too Bad , it's french!

[@bradwilsey9426]

That fan should be on the other side of the radiator sucking air through. Now you are limited by the fan and not airflow. Awesome build!

[@bryandhispup]

Dude, the custom bumper is the perfect touch. The fact that it looks like it has a smile, while you're pulling away from someone, is perfect.

[@Colin_Rickard]

It looks like a little kid with a binky in its smiling mouth hahahaha

[@bryandhispup]

@@Colin_Rickard But goes like hell

[@cj4ebay]

Yea the smile puts it all together.

[@OffRoad_Exotics]

Your sister is an mvp. Camera woman for all this time!!

[@Unthawed_Pie]

I wonder if he pays her because when I was her age I did not want to help my older brother with his projects

[@NineteenEighty8]

You have built so many bad-ass machines over the years. You honestly deserve 5 million subs man. Keep them going!

[@DetroitMicroSound]

Really glad to see a stronger superstructure, wrapped around it. It may just save your life one day.

[@scottwright388]

Still hoping you'll take that guy that sold it to you for a ride.

[@quevicular]

The bumpers cool because it adds a bit of character. Makes it look like he's got a :-) on him now

[@bigdadgigachad3042]

Should have painted it like a Little Tikes cozy coupe, just need to paint bottom half red. Even has the eyes

[@cj4ebay]

that's a kickass idea

[@MyAttemptToMakeALongUsername]

i second this😂

[@Shadow0fd3ath24]

Ill help with the Clutch slipper elimination explanation of what you did... it jiggles around and can shudder under hard launches during drag racing and kinda suck....but for a street use the OEMs put them in as it allows you to downshift and the clutch ramps to slip past the basket and the basket to turn and to slip just enough to keep the rear wheel from locking up if you dont rev match or if you shift to first at a high speed, not an issue in a car as much till you beat on it

[@SkellerART]

I still think it would look cool as a tiny truck. The bed from a Daihatsu Midget would probably fit well.

[@bobmanzi7712]

Great stuff thanks

[@kckustomwelding]

Wow this thing is going to be on the Next Level! Amazing work!

[@CallMeTonyga]

bro say its too cute, gotta add hotrod flames and cheese spot

[@georgeau2523]

Great now I'm going to be late for work watching this first, thanks

[@David_Blong]

Awesome looks so much better definitely my favourite build of yours 🎉🎉🎉🎉

[@paladinbirdy6032]

The cheese color and shape with that smiley exo makes that thing so cute.

[@adamr9215]

With the turbo that low, you need a pump on the return side. Oil is supposed to flow through the turbo, not back up in it and have to push back. It’s best to just mount the turbo higher and let it gravity return.

[@jasonbose3507]

Man, I remember when these little cars were new. You pulled off a miracle and made it cool with the mods. Good job! Great video 📸. Thanks.

[@PHUSII]

Add one bar under the windshield for that side impact protection and you are golden!

[@BusstterNutt]

Thank you for all the hard work in making these excellent videos.

[@jamessharp4204]

Ran into you at the gas station the other weekend on the turbo busa swapped quad, just found your channel, awesome stuff

[@masterofpatent]

I was waiting for that video to upload!!

[@chicagovasko]

Vasily brother I'm so happy to see you man you grew from like 45 years ago. So proud of you man you keep up the hard work and nobody can ever down talk your work ethic plus hard work keeps you healthy. Brother you gotta do an exhaust wrap on that header it's way too close to the oil filter plus exhaust wrap brings longevity to your motor..

[@perfeicaodaantiguidade4710]

Parabéns pelo seu projeto meu amigo

[@Charlie1997-]

Happy cheese! Looks sick!

[@Hungry_Hunter]

Where does the parachute go? Your fabrication skills are magnificent a joy to watch.

[@shaneeickmeier6213]

You have come along way. When I first found your channel, I loved your ideas and your ambition but wasn’t impressed by your skill in the least. You have transformed in leaps and bounds. Way to go buddy, keep up the great work. Everything just keeps getting better.

[@kombination6391]

I dig your builds dude My sons also get excited when you upload....Cheers From Australia....

[@thomperkins]

My dad used to build those in Sebring, Florida in the early 80’s. Yours is much better than the ones they put out. I’d be interested to see how yours performs on the 12 Hours of Sebring track. Great build. I remember watching you build the NASCAR go kart in your shed. You’re killing it.

[@sQuEeZyMaN13]

The next time you replace the blade on your chopsaw, consider getting a Tenryu blade. It sounds like chinesium, but they’re better than Evolution’s blades. Picked one up in a pinch one day to finish a job for my company, it lasts longer and is quieter.

[@ruvimz4314]

Im excited to see it rip!🔥

[@craigbowley6783]

Dude that thing is sick AF! I can't wait to see what kind of numbers you pull at the track and how it does on the street;

[@Motorheadco]

Wild man

[@EricJamesVideo]

Nice work. Paint the exo yellow to match the car. Might blend in nicely. Maybe the front needs some cross members and maybe a metal grill in between them?

[@krishnapatel2863]

Love this!! I just found your channel and binged all the videos

[@Nissanalltheway]

Let’s goo 🔥

[@bensprink9943]

Glad you're caging it. That thing is a death trap, especially once boosted

[@thestonesaver6345]

Love you’re build Vasily. You’re a monster man! 😊

[@Room1sixtyfive]

It actually turned put pretty good, as a rule of thumb you want to leave 3/4"+ from any panel in case something happens that you have to replace a section or something gets bent, happened to my stepdad on a JK years ago and since then we just leave a gap... Doesn't look as tight but we have replaced sections and that space helps a lot.

[@VasilyBuilds]

Solid !

[@kylereese4822]

@@VasilyBuilds Mustang with 2 busa turbo engines with 200bhp each, 1 engine for the front wheels the other for the rear... ?

[@gokartbob6478]

Vasily always makes me smile 🏁😎👍

[@toploverss]

ponle una rejilla a modo de filtro al menos para que no entre nada al turbo :) menuda obra de arte¡¡¡

[@PurpleMonkeyWaffle]

YOOOO It was fate that made it cute! Because its a monster. Its funny lol. Seeing that cute little thing fly will put smiles on faces 🙂

[@elen5871]

this needs to end up at SEMA or something, it's definitely that caliber of project. puts a lot of them to shame, actually, on account of the level of creativity. I'm eternally jealous of this thing. also, all you gotta do to make it look aggressive is lean into the pareidolia a bit, cover the headlights a tiny bit so it looks like >:) nstead of just :), give it eyebrows. with the smile it will be perfect. just do stickers, that way if you dont like it you can jus take em off. or if youre just in a good mood!

[@elen5871]

also my LORD does it sound mean with that turbo on it, I cannot wait to see that thing on the drag strip.

[@thundermite1241]

If you have a issue with steering grip adding tractor weights might help

[@drewanderson8279]

The bar across the top of the windshield you should put a slight v in it like an angry brow. And the headlights put an angry top cover like the old banshee light covers. Make it look less "cute" lol

[@drewanderson8279]

Make the headlights look like there frowning. You know what I'm talking about right.

[@fabio77809]

But you're getting the taste for having turbo hayabusa engines 😁😁😁, this turbo project is also interesting 👍

[@RFritas]

0:58 I can't belive he welded dez nuts

[@user-ci8le8qt7u]

Sickest one of one custom man

[@reallyswift]

Maybe add some “mean eyebrows” above the headlights. Some on the small diameter tube downward angle from the sides of the skeleton, and down to the bumper.

[@jamesmcgee9279]

I love it! This looks like a smile with braces and the 80s head gear😂

[@user-um2qe2ej6x]

The increased power really needs that exoskeleton cage.

[@gregswafford9839]

You need some old school KC round fog lights for that top bar.

[@adamjosef5323]

Such a sick car bro!! Keep up the great work!

[@ValentinSerrano-nj4dc]

Got to love natural born engineers 👏👏👏 kid that looks like insane fun just needs ac .👍

[@Bartskarts]

Bars following the contour of the front fenders and just behind the door for some sort of side protection...

[@SDS-1]

"Turbo Cheese 🧀" 🥰

[@hawkeye454]

Very cool man!

[@thatjdmkid8170]

Yesssss

[@markkerr292]

It needs a F1 style rear wing

[@fastinradfordable]

Brother man, I notched pipes for a living last year. Just use a 4” angle grinder and cut each side. Much. Much. Faster and easier.

[@roboman2444]

That thing looks extremely unstable at high speed. It may be useful to install some shock travel potentiometers and take some measurements. Even a gopro looking at the suspension would probably be enough. If there's any lift, that will be noticeable. Maybe an undertray or a wing would help. That and some suspension tuning in a large open space.

[@ZeroPest-y6z]

Faaarking sickest build ever fucking love it bro

[@Ando9909]

6061 should hook you up with one of his tig buttons!

[@benschlack5814]

Best Hayabusa swap on the Internet

[@mrkemblegilstrap]

Bro, that thing sounds amazing! Did someone say Nitrous, lol

[@michaelblacktree]

Imagine getting gapped by a cheese wedge with a pikachu face. LOL 🤣

[@Frankie--da-fixer]

You and Grind Hard Plumbing should do a Colab build😊😊

[@corinful]

I think this young lad is better considering his resources

[@Frankie--da-fixer]

@@corinful Be tough to call,Ethan is pretty sharp!!

[@mancavecustoms13]

I gotta say I'm surprised views aren't coming in man! Awesome job as always and the yellow on thumbnail looks awesome! Maybe try adding yourself on the site bigger? 3/4 height of the picture or so, so you're noticable. Algorythm really likes faces.. good luck

[@VasilyBuilds]

solid adv. did it . Well after 15 episodes it def falls of a little

[@mancavecustoms13]

@@VasilyBuilds Yea I get it, its tough. Where in US do you live? Im building bikes in Spain, but always been thinking i'll end up in USA with youtube :D

[@P-J-W-777]

You’ll find those scavenge pumps to be a bigger headache than they are worth. Just ask anyone who’s had turbos with that setup. Keep up the good work though.

[@craigbowley6783]

I'd have to make that driver seat move back! I wouldn't want to drive something that fast while hugging the steering wheel and having my knees in my chest.

[@ericlewis3444]

kinda looks like a ball gag now, ngl. but this is a killer build bro

[@juliolausell4399]

Vasily if you look back at the video just as you remove the clutch cover (10:58) exactly, you will see that the first friction disc has its ears not in line with all the other ears of all the other discs. If you want to install the clutch correctly this should not be over looked. At(12:29) of the video the last friction disc is not correctly installed.

[@roboman2444]

Are you going to tie the top of the exoskeleton into the internal roll bar hoop? That would probably add a ton of stiffness and chassis rigidity without adding much weight. Just need to cut holes in the body.

[@bryduhbikeguy]

Lookin great Vasily. So's the cart;)

[@chris2414]

Make a tongue out of sheet metal for the front just for laughs

[@retrobrid2784]

Guess ill enjoy the artwork of your car myself

[@jackmagnium6115]

call it goldfish because everyone knows the slogan for gold fish. "The snack that smiles back, gold fish"

[@Henrik.Yngvesson]

Haya-Bumblebee

[@Nissanalltheway]

Is engine 😃

[@kevinnielsen9251]

Its a happy little cheese wedge 🫶

[@keithmikolich908]

Exhaust? It's quiet already. Sounds good with the turbskey.

[@BrandonHamer-pn8vm]

Need some big ass fenders lol 😂 give it that hotwheels look 💯 💶 😮😅

[@TheConquistor]

man, you are awesome!

[@mechanicaljebus2074]

Small tip you’re running to hot on your stainless work it’s evident by the colouring and meld your stop/starts

[@MangScoots]

stg bro was doing dog crap booger welds like last week and now hes laying kick ass beads

[@jamesbarnard1384]

Looks good apart from the colour 👍

[@reaper666grimm]

The most aggressive is the cute ones.

[@osamaladen1515]

good job brada

[@sirspikey]

"And it was not fun!!" 😆

[@Fr331995]

This things sick

[@bighomieJ5X]

@15:04 That’s what he said 😂😂😂😂😂

[@FastLaneLyfe]

Looks like a Dorito! 😂😂😂

[@Taintlessdisc]

Needs some exaust stacks or a stinger pipe lol

[@vahroom]

bro is crazy 🎉🎉🎉

[@sonny9608]

I do not hate its cuteness.

[@fabricationnation8052]

Pretty sure that exhaust volume is what effects spool time....basically more displacement will spool the same turbo faster.....weight of the car should have nothing to do with it

[@VasilyBuilds]

more load

[@cooperthomas5290]

Top teir content

[@MicroTurboComplex]

13:57 so a heavier vehicle helps to spool a larger turbo? Mind elaborating? I’ve never heard this. Thanks, sweet project!

[@TheConquistor]

yeah i would like to hear also

[@23197]

wide body pls pls pls