TURBO K-Series Smart Car Does WHEELIES!? Learning To Launch The Tiny BEAST! C7Z06 Down On POWER Fix

PRE SALE Kater Tot T-Shirt!! bit.ly/KaterTot
BUY MERCH HERE- bit.ly/FPMERCH
Merchandise Purchases will be going towards sponsoring vehicle ride alongs for Veterans and First Responders!
For Veteran Submissions Email - [e-mail]
FOLLOW US ON INSTAGRAM- / fasterproms
FOLLOW US ON FACEBOOK- / fasterproms
Send Fan Mail!
12961 44th St N
Ste B
Clearwater FL 33762
FOR PACKAGES AND SHOP INFO- www.fasterproms.net
FOR CAM'S AND SUPPORTING MODS- www.briantooleyracing.com
KEITH'S SHOP- www.keithspitstop.com
NICK WILLIAMS- www.williamsperformance.net
WRAP PRO'S- wrapprosllc
Thanks for swinging by the Fasterproms KZbin channel! Drop a comment below, like & subscribe!

[@Fasterproms1]

Hey Guys I can believe we did this MAN THAT WAS FUN! Thank you all for the support! We have a number of things to work on and iron out. Ive been outta town Up in N Ga. I totally spaced on putting the dog clip in I had one and dumped it and then forgot to put one back in and I was in a big hurry. We have some big help coming in soon for upgrading a few parts and we need to get back to some of our other Projects. This has been a ride but its just beginning!!

[@ohyou_6599]

hey your 2nd gear issue could also be a shift fork, maybe it ate the face up on 2nd gear side.

[@stephenmoore8293]

I seen a chevy with a faster proms sticker at ingles in town one of yours?

[@burningdaylight1085]

I don't think you actually have to extend the scoop all the way to the front now that the car has a roof again. I think the wind coming in the windows blew the air up and, like a wing, the sloped roof would pull it back down. I think the rear scoop would have worked if you had a roof. Just my thoughts. Love the insanity of this project! You guys are awesome! ;0)~

[@gr8whitz]

Will the subframe/roll bar act as a wheelie slider? Measure from the centre of the wheel to the ground then from the centre of the wheel to the back of the subframe. This distance looks greater meaning it should stop the Kater from kater wheelin!

[@robbieb8274]

2 camera angles for each launch is enough

[@jkbaker01]

Georgie is awesome. He is smart with cars and is full of energy and seems like such a fun person to have around.

[@twotonetonybaloney9963]

Dont turn when you wheelie we've all seen it before..

[@emanh4keem_san420]

Cleet flashback

[@Joe-tt3fg]

Also kyle in the mr2

[@GaryMorton93]

Lil Tche lmao!!!

[@zuestoots5176]

and dont lift, just shift

[@stevenplaskett7728]

Kyle almost smashed on his last wheelie in the mr2 u guess he forgot

[@jonnyonwheels]

I love the second wheelie at about the 60’ (14:33) when the boost comes in! Also, while I’m no Honda boy, I’m glad y’all went this route with the swap instead of a bike motor!

[@redrolo149]

Of course it does wheelies XD it's like 5 feet long with a 500 HP engine- In the back. The thing could probably do backflips.

[@disgruntledegghead6923]

Eventually...

[@aveoxus1139]

get Milo to build a hoop frame like he did with the roll golf

[@zuestoots5176]

Orange Gremlin that does exactly that. Rolls over on its back on a good launch with no bars.

[@Mastermindyoung14]

Next video: "we backflipped our smart car!"

[@MrSherlockDomes]

Gonna have to get Travis Pastrana on the phone. That dude will backflip anything.

[@cfwheezy]

This channel has gone 0-100 real quick. Just some cool guys that like to build stuff and make it rip.

[@Apgreimelgoogle]

Driving that Smart car must be scarier than Brent’s Joker laugh lol

[@SFFRACING]

🤣🤣🤣

[@joshanderson9579]

Easy now that laugh is from the king of K series’s.

[@fishyfool]

Everyone says he's such a nice guy, that Joker laugh says otherwise.

[@controversyV4S]

@@fishyfool He is evil he makes honda's smash v8's

[@boofmcgee1]

*brent laughs from the cockpit of the burnout batmobile*

[@carlobrigante881]

Alls I'm gona say :Craig is the real MVP, fellas..he is definitely someone who I would like to be in my team 👍🤙.. he got down and dirty without hesitation, fuck yeah brother 💪👏

[@bradlepaddle9512]

From Father timing to Papa wheelie 🤘😂👍🇺🇸

[@Diffarn]

When you're showing the same thing in multiple angles, pls short all but the original one down, it's too much waiting otherwise - in my opinion. Other than that, great video, great build and as always, great Georgie :D

[@mikeymasi]

Ain't that the truth. Spent half the time clicking fast forward

[@4BillC]

Absolutely agree! Different angles are cool and all but the same 10-15 second clip 5 times over is a bit much!

[@PapiLuitube_]

Same clip over and over and over yada yada yada Yall sound like female complaining on her period stfu n watch the video god dammm

[@BobMonkeypimp]

@@PapiLuitube_ Calm down! Don't hurt us mighty edgelord.

[@PapiLuitube_]

@@BobMonkeypimp lol haha im good i said it in a lovely way 😂

[@troywhitlow4650]

I have a feeling when 2nd gear is fixed it may just wheelie when you snatch 2nd gear. 🙏🏻

[@Timberwolf69]

I think you might even be able to wheelie through to fourth without touching the ground...

[@louisturner8842]

Sequential....

[@gregorycarter9352]

I LOVE George’s laughters and everybody else’s.

[@dirtayk6742]

Just parked next to the exact same car at the store today. I literally thought to myself, holy shit this thing is tiny... I couldn't begin to imagine how much fun that thing is. I hope to make it to Florida once this madness is over to see all of you guys. I grew up in NW Florida(Eglin AFB) in the 80"s and want to come back to see the FF. You rock Jeremy, old car geeks like me can't get enough of this stuff. Thank you so much for bringing all of us along for the ride! Much love to the entire extended Fasterproms family❤️👍🇺🇸

[@buellb0y]

George need his own channel! The man is a personality all on his own. Let’s make it happen!!!

[@travismilligan8883]

I'd prefer seeing him drive this too...

[@shred1894]

Holy crap I'm early. I can't wait to see it when you got all the aero and bodywork finished. It's gonna be insane. Needs a wheelie bar like 3 weeks ago too.

[@dragblazer99]

Katertottin' Wheelie Poppin' One of my favorite builds so far. Never thought I'd enjoy a channel like I do with Cleetus. I'm starting to like Fasterproms even more. Keep up the good work! Maybe convince George to take that burnout truck for a rip in a video!

[@SAMDR1998]

I wish my smarty could do that haha this is such a good build

[@schaawiiing2109]

Someone tag hoonigan, i think we found a car that can finnaly wheelie the loading dock 👀👀

[@knowbull5hit590]

SCHAA WIIING the drive there would be pretty interesting ahaha

[@jonesmcbones5968]

Ooooh you might be correct

[@smokeydbob]

I want to see more of your Dads Corvette maybe a good Fathers day series! Keep up the great vids been watching you from the beginning❤

[@Onewheelordeal]

I feel like a remember a speech about how this would never run down the drags because it was just for burnouts/fun. 🤔🤔🤔🤔🤔

[@HRM.H]

Complain much

[@micahbuchheit1283]

Appreciate the tuning tip with regards to spark knock / fuel quality. Always love the content !!

[@michaelcaraway2305]

When you build the bottom of that engine you might want to consider a sequential transmission a clutch and pressure plate upgrade and for sure a wheelie bar to go with it.

[@andrewbartleman9169]

I can see this channel becoming more of a Honda channel soon haha. It's cool to see a ls shop do honda stuff

[@aaronmitchell196]

@Zachary Trent and more badass

[@joshuaearnheart2756]

92VXEG I’m not sure why everyone dogs Kyle. 3rd gear in a Honda ain’t easy making that power. There’s compilation videos everywhere of Honda’s money shifting. Drives pretty good for a kid. And builds it all himself. He wasn’t missing gears in the sequential, it was messing up. His mr2 doesn’t like to go into 4th, and then it shredded itself at the last track day. See the correlation?

[@joshuaearnheart2756]

Aaron Mitchell and a lot slower! That car with a sequential or a good auto would win all kinds of money street racing. It will hook anywhere

[@BroiBoLs]

@@joshuaearnheart2756 your right they didn't tighten that one bolt that's y 4th was not feeling it

[@JoeMtMan]

Omg Jeremy those look so incredibly good on the Kator-Tot....I never thought a rim would make such a huge difference on a car then the set on

[@tonymattisson6158]

And matching skinnies on the front would look amazing!

[@JoeMtMan]

@@tonymattisson6158 absofuckinlutely it would....

[@ericpettyfishing]

Man, I love this thing. It's so much more than I thought it would be. So sick

[@michaelhilton3747]

I saw a video of a smart running a 9.96 in the 1/4 at 133mph , y’all should make that yalls goal to beat lol

[@Fasterproms1]

Yes sir I think we are close as is.

[@rtrpsponter3966]

I was dying to see a full pass lol

[@SCOOPFREE]

This has to be a must. Would be the perfect ending to the story.

[@deadhead_012]

If they stick a wheelie bar on it and get the TP and suspension dialed and this thing will launch like a monster.

[@judyfps5059]

Michael Hilton 7s smart kar

[@smooth_ops2942]

You need to buy a pitot tube for a RC plane so you can measure the air speed coming in to those upper intercooler ducts to see if it's doing what it should be.

[@disgruntledegghead6923]

Or some high cfm fans...

[@nakedbandit]

I can just imagine seeing the smile on Brent's face when he sees the vid. Kater Tot is a certified ripper.

[@paulezay3599]

This smart car is a good addition to the faster proms channle I love it keep up the good work

[@vegas_the_trucker1595]

Needs some skinny drag wheels in the front, a adjustable wheelie bar & a sequential transmission

[@bobhenderson7961]

Time for a built motor and dog box, trip to PFI speed

[@mikeymasi]

"so strange that it's a Honda and does a wheel stand" *Boostedboi Kyle has entered the chat in his MR2*

[@mattwalker5852]

That Blazer just looks badass !!!

[@Tuskanr]

Worth every second watching.

[@hegeliandetective1034]

Hey Jeremy, just wanted to say, that's an excellent point about bad fuel. Sometimes the gas station or gas trucker, accidentally pours lower octane fuel, and in a few horror stories, I've heard of them accidentally putting diesel into a gasoline tank. Which I can have empathy for some of the truckers are working on very little sleep or poor-sleep because of sounds waking them up in their cabin. But again, great point, that if you're hearing spark knock or worse, then it could be bad fuel. I had a bad intake manifold gasket so it was causing spark knock even with 93 octane and an intermittent misfire. Currently running a cheap D-series D15B Honda Engine from 92-95, came without a crank position sensor, so I had to piggy-back the ignition, so all of these things I am learning from hot-rodders like you, about how to maintain vehicles without a CPS.

[@tonycottone149]

I like the tuning tutorial at the end. Awesome content keep up the great work.

[@hondaghandi]

I have a K24/6 speed and a pile of 4130 in the back of the garage. You guys are making me want to go smart car shopping!!

[@StLMikie]

Thank you for the video Jeremy!

[@sedrickwells8545]

That wheel and tire combo is awesome

[@phantomdiesel8032]

That George is hilarious! He cracks me up!

[@kscerbo]

This thing's gonna be put into the wall in no time

[@bigolbootycheeks9138]

Tis the life of a short wheelbase and lots of power.

[@SoI_Badguy]

With a locked diff and a wheelbase that wide, hopefully it'll resist rotating. As long as the tires don't let go, anyways.

[@kscerbo]

This thing is damn near a over powered quad

[@disgruntledegghead6923]

Like Uncle Sam?

[@cpope09]

This rig reminds me of all the vw beetles I used to watch at the drag strip when I was a kid. Sketchy af and a riot to watch.

[@chicagovasko]

Jeremy my favorite episode by far i need follow the GMC blazer guy.i love that white blazer.

[@johnnyg9507]

From Tennessee! Great Progress! By The Time Yaw Done With Kater Tot, 1,000z Of People Will B Wantin To Order 1! LoL!

[@ryasha1990]

You guys need a removable wheelie bar and then it'll be so much fun and safe

[@trillrifaxegrindor4411]

guess what would happen if they did a serious wheelstand? nothing other than it would do a wheelstand,stop being a Marry

[@jonesmcbones5968]

I like your channel, always so positive, I learned about you guys from cleetus and thought I would check it out, keep being positive 🤟🏼.

[@ericcarrillo7959]

That ease drop by squirrel was on point lol definitely a Boomhauer resemblance... lol

[@ralphgarcia6632]

Ever since jeremy and brent built this thing I've been watching his channel more than ever great content

[@GreaseMonkeyVIP]

Being a transverse setup ill bet your gonna have to really dial in the shock setup and alignment to get it to launch straight up in the air!!! Looks like fun guys keep up the great work!

[@TaylerSpliff]

Another great Santana banger is called Samba Pa Ti. Thanks for the great content.

[@josephgottschall9397]

Greetings from Pa. Keep doing what you are doing bro. Thanks for always keeping it clean and always keep Christ as your compass.

[@UncleManuel]

"One lug missing, you know how we roll..." George has the best one-liners... ^_^

[@hondatech5000]

I saw one yesterday and thought the same thing. When you see it on the video your just not thinking about how small it is. Hoping the tracks start opening up and doing events again soon...

[@tehmascot]

George and Brent need a channel... like forreal forreal.

[@daltonmcmaster3489]

My dog was disappointed not seeing her friends at the end of the video. Love the vids guys

[@1maydayme]

SKETCHY has a new benchmark. Man I want to go for a ride in that machine!!! Stay Safe!!!

[@captainfancypants4933]

i like how you guys stay all tightnit and shit rather than go after each other i pop around to here and pfi and cleeter and boosted boiz and it's like watchin a big ol family having alll kinds of fun

[@willienelson7720]

Love all your videos and builds

[@MiataBeFaster]

Kater tot :) love this little thing

[@2S1L3NT]

That S10 Blazer is Fu**ing AWESOME!!!

[@andyh8239]

I love all the Social distancing at 16:18 🤣

[@DonnieX6]

No doggos today?? :/ Oh oh, I need my fix!! :D

[@adamlarson5976]

This is the moment I have been waiting for !!!!! This car is insane job well done .

[@Rocksolidbullys]

@11:21 something only a good old Mexican would do! Luv it👏

[@mjmcomputers]

Sequential time? 🤔

[@bustedrav]

Yes please

[@hectorflores7185]

Would cost more then this weak ass car

[@huckilt]

Love the “STREET OUTLAWS” edits with 12 different angles for one shot 👍 gets boring on that show but here its jus cool seeing that lil Kater Tot in all its glory lol

[@kollak01]

5:57 "dont forget to floor it" HAHAHA

[@mickgrimes9078]

this thing is such an inspiration. im def going K20 in my smartkart. you need to move the front subframe forward a couple inches, it helps the stability a lot surprisingly. i went 4 inches on mine

[@bryanphipps9131]

Great job on the build, and only in a month! Big Pimpin!

[@allanrickard2117]

It was built-in one week never done before just working the bugs out lovely I like it

[@JoeMtMan]

Never ever thought I would ever mumble these words.... I absofuckinlutely love a Smart Car.....

[@wadepreston5298]

Seen the Blazer in the back round of a video was hoping to see a dyno session with it! It looks freaking NASTY!!👌🤘🤘🔥🔥

[@siwood22]

Definitely going to have to get a clutch slipper on this !

[@jackjr1]

I think it's hilarious that all of Jeremy's employees are now also amateur cameramen.

[@CaptianAwesome20]

You need to upgrade to the EM1 Clutch Master Cylinder. Hybrid Racing sells the best one on the market for these transmissions with a stainless line. You should contact them and just purchase their CMC kit with the stainless line and consider the short shifter with stainless cables. You will never have problems missing 2nd or 3rd again. I live and breathe K-series and this is the way to go. FYI make sure you use the proper clevis for the CMC.

[@Thicksmoke126]

That is so flippin' cool.

[@waybous]

Can't wait to get the Kator Tot shirt.

[@garystinten9339]

install a "discreet" diskcreeet dispenser above the rear tyres so you can pump a few pumps over the rear tyres and prep the tyres when you need it.

[@bangdagears]

Hey guys. Little insite, I own a TSX myself and I blew the 2nd gear assembly including the syncros very common on the TSX trans. Issue is the CMC as Brent described it having a delay valve built into it. It causes 2nd to not want to be power shifted. Replace with either ktuned cmc or the stock Honda cmc off the earlier 2000s honda civic. Unfortunately you have to rebuild your trans but the good thing is the K series Si trans gears should fit and the ratios are shorter making your take offs fun lol. Hope this info helps. Keep at it guys you'll soon want to K swap the world

[@636emir]

Jeremy spotting at 13:44

[@mattreed9189]

Yall put some hot sauce on that K-tot.... SPICE~AAAYYY!!!! lol Love it more and more each video. 🤘🤘🤘🔥🔥😈

[@SteveWifkins]

Love Craig’s truck! Seen it in OCMD plenty of times for Cruisin Weekend. Way back when it was champagne colored. #stonewagon

[@joecucch8261]

I love the Kator Tot project but I wish you would spend as much time on the Miata. Even a small power adder on that LS powered beast would be Epic !!

[@jakesmall3454]

Why does Jeremy look like joe exotic when he’s got his helmet on lmao. I can’t unsee it now

[@JohnRoberts71]

Great content thanks for sharing

[@jaredthisdelle5617]

Good fuel is key that's for sure I can tell when I get bad gas which I can't stand I always try to go to one place and get good fuel cheers boiz great info great vid

[@darrylyoes414]

"How many lug nuts do you need?" "Sixteen. 10 for the back, 6 for the front."

[@rydplrs71]

George mounting the tire needs the goofball music like the head porting.

[@imagineaworld]

This thing is looking good jeremy, before you end up at sema can you make a montage of stuff with ending credits with everyone involved? Would love to see a hearty presentation of everything that will have ended up going into this build. Its beautiful man.

[@ClayPigeonKilla]

Needs a giant penny fabbed up for the back. It would look like one of those penny racers we used to get as kids. Put a penny in back pull back and watch it wheely like crazy!

[@frdfandc]

Roof intake looks so much more symmetrical and fits the shape of the car much better.

[@noahpaulette1490]

One thing I love about Michigan as you can get 110 octane pump gas the downside is that it's $10 a gallon. Used to put that in my moped and it would rip. 50mph on a 50cc engine.

[@ThomasJoseph315]

Good job Brent for the tune! :)

[@TetraHydroCannabinolTHC]

That smart car is dope, now it does willies! You guys are awesome

[@robertlawrence8330]

Pretty cool that you guys use skinnies steecret sauce 😀. Back in skinnies racing days he was a beast on the streets. Big big fan on him in Missouri.

[@Fordman6546]

Smart car doin' a wheelie, never seen that before until now. Congrats guys.

[@allenmckinney9533]

They do them. They just have to hit a speed bump.

[@Fordman6546]

@@allenmckinney9533 HAHAHAAHAAHAH.

[@darothc]

I remember Seeing this badass ride in the background of the last video.

[@chriscox6997]

I think it would look cool with some wheel spacers in the front. Either way badass build jeremy.

[@sweats55]

Need to feature Ben’s E30

[@BigDawgTheGreat]

now for some suspension tuning haha.... wild little ride

[@RustyWells2]

That's the good sticky sticky!