Turbo Kit is FINISHED! KA 240sx Is Ready to Boost! (Almost)

[@tilikum253]

Drill holes in the crash bar for more air flow

[@cameroncarruthers4286]

most underrated car channel there is (.)

[@ViktorJ0van0vski]

But we going up man just with babysteps

[@RobbieFerreira]

as long as I got you guys I'm good!

[@ViktorJ0van0vski]

@@RobbieFerreira yeah dude we got your back

[@ViktorJ0van0vski]

@@RobbieFerreira hah you just made my day by putting 4 hearts on my comments cant wait for the other mearch drop so i can get everythinggg

[@zacmay4916]

Cant wait for the whole fleet to be boosted. Show the brz some love now!

[@nicolailarsen9447]

This Channel gonna blow up man! Insane content!

[@ViktorJ0van0vski]

STEEEEVEEEE THAT WAS ME I ASKED ABOUT STEEVEE THANKS DUDEEEEEE ❤️❤️❤️🔥🔥

[@theabsoluteworstest]

Yours is my absolute favorite car channel. I don’t currently have the means to do all the car stuff I want to do, being in high school and stuff, so I live it out through your videos. I’m staying committed though. I can’t wait to work full time so I can buy another car or two.

[@mikeanfernee2365]

8:35 this is for everyone *always respect the power tools!!!!*

[@MorbidPanda69]

COMMITTED CREW WHERE YA AT?

[@bearthunder7831]

Right here!

[@nickolasabab5999]

Here!!!!

[@jayyymoneyyyyy]

cut holes in the crash bar to let air through, you could even mesh it to prevent debris getting through depending on the hole size

[@chris.whitlock8543]

I feel like the editing gets better every video props to you Robbie

[@josephshamon7824]

Love you’re videos been here since 10k

[@ollypreston6252]

Same bro🙌🏻

[@marvelousyang]

Subaru BRZ - 0-100km/h (0-62mph) 7.6 sec stock. Top speed 233 km/h (145mph). Sick video as always

[@itsdakun]

THANK YOU FOR THE STEVE UPDATE THAT MADE MY DAY 😂

[@kylekast123]

If you weld some tube steel on the inside of the crash bar it should a stiffen it up as well

[@jezter4360]

Yayyy the turbo is almost on!!!

[@icedsilverdragon]

you can always just cut circles or ovals into the crash beam, that way air still flows through it and into the inter cooler but you dont lose the structual integrity of it..... sorry my spelling is bad lol

[@piemanmatty97534]

Drill the middle hole first the shock of the hole saw starting to cutting fucks the drills up I break them or bent them all the time in work

[@MCscarfacematt]

just use rubber fuel line around the hole you drilled in the body just slice the hose and it should slide over the sheet metal and wrap around the edge cheap way to clean that edge up and the rubber wont scratch the polished intercooler pipe

[@loljose1234]

Nothing like going on your lunch break and seeing a new vid 👌👌

[@handlessmonster2345]

I go the top speed in my 1997 mustang all the time but its govnered at like 220 kmh and sort of sketchy on sask roads

[@devon5078]

if its the v8 you can get an xct (i think thats the brand) flash tuner and it wipes the governer and does a lot of goodies to make it faster

[@HyperInstinctzHD]

You actually make me so motivated to work on my own car, uk fan over here. Keep the videos up!

[@Lee01Mr]

I love pop up headlights! Stay committed!

[@Fat2Fit5k]

I've always noticed you tie your hoodie strings. Found it comical I am too lazy to do it lol. I just make sure the strings are same length 🤣 Props for always remembering to do it though lol

[@CaptainLongbeardTuds]

excited to see how this turns out

[@devinidc]

I love the start up on the BRZ!!!

[@TheBlackLion13]

You probably want to try a solar trickle charger. This just stays in the car and you do not have to bother with the cable. I actually plan to install one in my car and replace the battery with a pack of super capacitors.

[@markpopoca4938]

Gg boys 2 cars down one more to go

[@Mrjack-yn2dj]

What about the Tacoma?

[@travislewis3470]

drill 2 1nc. holes in front bumper for better air flow

[@Landon.Schier]

Drill holes in the crash beam for airflow

[@amjada314]

Always enjoy your videos. Keep up the good work. Cant wait till I get a project car

[@guymacwilliam7765]

class vid, i couldnt tell if you did but if you drill pilot hole first before doing the main drill it should help prevent the bits braking, ps buy an e36, cheers, keep up good work

[@emilandre4438]

I'm so hyped for this video

[@maxxas5067]

Me again I also recommend doing egr block off if you haven't already

[@Fat2Fit5k]

Cant wait to see finished product keep up the good work!!!!! Love the vids!!!!!

[@TheNinjaMonkey43]

How happy are you that youre not in ontario this week 😂😂 good ol -35°C, it hit -40°C last night, and from what i can see its not too bad out there

[@thundertracker4510]

Finally! Hole saws are a pain to use, I remember shattering like 3 bits in 15 minutes because of them

[@doxxie7229]

I got a #notification and I dropped my phone and instantly opend yt luv your vids man

[@cosimoyannis]

here in germany everytime we get on the autobahn we go topspeed haha luv it (because only own a e46 320ci lol)

[@GeorgeSweet]

Killin it guys

[@davidsidrak]

I love me some Robbie repairs and Emerson does it

[@thelude9155]

It's so cool that you would do that for your friend bro..

[@mykolasvidziunas7837]

Drill few big holes (those racing ones lol, those like on racing car's rear bumpers) in crash bar to make more airflow to intercooler ;)

[@ViktorJ0van0vski]

Hope you feel better soon man take care

[@RobbieFerreira]

thanks man!

[@richardwilson-sobotka8826]

Lets get it!

[@daynehumeniuk9597]

Tell Emerson you’re not supposed to do gasket maker with a oem gasket unless manufacture says so you only do either or. If you do both it creates a weak spot between the gasket maker and the oem gasket. Learned that in my heavy Equipment class.

[@atm31ac21]

yay!

[@Demonpixyb]

I'm sure that charger is ok, but the Deltran Battery Tender brand is industry standard! Just a tip! ;)

[@Var1s_]

Dude I tried out Akinator to get you and the first time it raged quit on me xD. Second time it got you and I thought it was really cool. Love your vids man stay committed.

[@rubenrodriguez-zg4sg]

Best way to start the day getting you 📦

[@rubenrodriguez-zg4sg]

#notificationsqaud

[@Rieku_]

Ohboyyyy!!! ❤️#staycommitted

[@1ton_mayhem]

They make a bit for removing spot welds

[@TheTyrkiskpeper]

How is that different from a normal drillbit?

[@michaellopez1599]

Great videos bruh keep them coming playa

[@jasonpaeth6608]

We’re is all the snow I’m in Michigan and we just got hit with a foot looks nice over in Canada aye

[@dqultimate]

Yoooooo been waiting all day for this!!! Notification gang!!!

[@nlobbe]

I go top speed of my car. (german) 😁

[@HackerTeam1337]

N L same here 😂 everyday

[@philmitchell9552]

Cause you lot are allowed, if i go 4mph over i have to pay to go on a bullshit driver course or i get points on my license

[@rxtbt]

duuude what's the top speed of your car???? :D

[@rxtbt]

(my car max 200 km/h #bauernbenz #treckerdiesel)

[@nlobbe]

@@rxtbt I have a 2016 VW Polo which goes 200km/h (124mph) My dad's BMW 535d F10 goes 250km/h (155mph), an awesome feeling to drive this fast and no one can punish you😁

[@Marko-ic4wj]

i hope you get that s15 from the story it would be sick!

[@PerryChild4122]

This is great to see. Love it

[@michaelfoster3871]

CANT WAIT

[@mihailpetrovici5044]

3:29 when you are uncut

[@RobbieFerreira]

😂

[@kostadinkozelov5762]

That brz sounds amazing(greetings form Bulgaria)

[@musdy2089]

Good work brotha😎

[@kameronmunsami5684]

Finally😂😂😂been waiting

[@donotatme]

I go the top speed of my cars :D JustAutobahnThings lol BTW, would you ever do a V8 build? (Sorry if you already answered this somewhere)

[@RobbieFerreira]

I would yea! just have to have the money for it!

[@calvingeishirt]

@@RobbieFerreira drop a 5.3 in the s10??

[@mccoykluttz3172]

Robbie Ferreira don’t you want a c6 corvette or something

[@ZkullKruzher]

There's a grounding problem somewhere. Somewhere is drawing the power where it shouldn't be.

[@eggbox3606]

make a bashbar so the intercooler would show more

[@triplet5375]

i notice some new things in the editing. like at 3:55 nice job

[@kougarlanier8782]

I love Chevy too!

[@AFXGaming]

was there some sort of paper on top of the gasket?

[@usmaan9]

Robbie im sorry ive been late for the past 4 vids #NOTIFICATIONSQUAD

[@ricardoquezada3109]

Get a bash bar that’s what I have for full airflow on my brz

[@Sam-kb7ro]

0:37 is that à New watch is pretty nice Btw nice video And #staycommited

[@marcelberry784]

Me and a friend went the top speed in his 106 gti a few times. It's about 245 kmh (152 mph)

[@drunkpolack7612]

do an intake install/tune for the brz

[@ContasYT]

You should get a front bash bar for the 240sx

[@AlphaFlight]

Everyone tops out their car. My turbo optima topped out at 148 stock motor.

[@_Furbz]

#notficationsquad 240 is looking sickkkk! Cant wait for it all to come together for both you and Emerson! So much merch reference and i still don't have mine yet

[@tautvydasser.8894]

Yeeeeet!

[@Fiveomotorsport]

Keep a lookout for another delivery today. Cheers!

[@RobbieFerreira]

I'll keep my eyes open😏

[@Mr_stg]

Are you gonna bring the keychains back?

[@triplet5375]

hey robbie. where did you get those aftermaket tail lights for the brz?? my sister has a 86 and i bet she would love them

[@matthewbuttle]

Triple T he got em off wish, there’s a video about it

[@ChrisWheezy]

Can’t wait to see it rip👌

[@MaxKutish15]

Committed Gang!

[@oxagon_]

Would you ever do a Rate My Car vid where viewers send in pics of their cars?

[@RVDrumming1]

Yo Nissan is sick. I own a Subaru but Nissan is really cool. I think later down the line you guys should do a 300zx wide body project. At some point.

[@michaelmclelland8440]

I have a 6 speed 2019 Tacoma if I’m doing 60 miles per hour and i see a traffic lite and have to come to a stop all I do is I’m in 6 gear all I do is press on the break and when I get to 20 miles per hour I put it in nuetral is that alright to do and when i make a turn I put it in nuetral and finish out the gear after I turn never used gears to much to slow me down I just thought that was made for 18 whellers

[@brand0nvazqu3z]

Can’t wait till the BRZ makes its comeback #NOTIFICATIONSQUADDD 🔥

[@omarnegron440]

Nice!! Currently building a s13 hatch on my channel!!

[@CabbageRoyale]

Did you use the gas nozzle to press the button on the pump....bro. love the vids

[@RobbieFerreira]

I have always done that idk why😂

[@777hambone]

That’s why my fingers always smell like gas after I fill up 🙄

[@vanruat]

Can you Make Custom functional Hood and vents for daily drive???.. I have 17 CIVIC EX-T and wanting to put so Custom functional hood and vents..

[@javychavez8653]

Aye be careful with that gasket maker getting inside the oil pan and in the oil, if it came out one side it's probably gonna come out the other

[@urielpresents246]

Can you make a turbo part list just in case we wanna build our own?

[@samcregan6380]

Need to cool drill bits while drilling I use wd40

[@treverw1]

U always wear a watch when working on cars? I’m surprised you don’t scratch or break the glass

[@danielallen5181]

Robbie dude can you please put a proper catback on the outback

[@BrianGlenn]

This series makes me miss my 240 lol.

[@andreashelgeland7883]

where did you buy the shift knob?

[@RobbieFerreira]

WeAreLikeWise!

[@dakotaallen8450]

Letttttsss gooooo

[@cameronschulte6113]

You should make a second budget car but with amazon instead of wish

[@tweedy4481]

All I want to see is some turbo slaying, isr needs to get their shit together

[@painrelaxamv1539]

1:57 we in germany do XD

[@draht8179]

Kann man so sagen... xD