Turbocharged F22C1 Engine Build (OEM+) - Full Start to Finish [4K] - S2000 AP2: Part 4

[@mbiservicedirectperformanc5840]

Quinn is an engine Jedi.

[@bachhoang736]

yeah sure ^^

[@Trekzaz]

Incorrect he is the force itself 🙏🏼

[@catman5029]

With a torque wrench lightsaber

[@vixcvi]

I like watching quin build engines, so much knowledge

[@meidoz5458]

More like he reads the brochure 😂

[@ROGENGINE]

Completely agree on that

[@andremartinez7484]

It's pretty impressive for being so young.

[@3Lb0r1]

Don’t forget to change the knock sensor they are brittle and will crack from just looking at them. As well as the starter they tend to grind on the fly wheel after just a couple years old. And the O-ring for the top sprocket for the timming chain. But also, you forgot the top O-ring for the vtec solenoid common leak area, you’ll most likely have to get it aftermarket from Kraken.

[@frankvanrijn964]

I can watch Quinn build engines all day long! His enthusiasm, combined with the informative way of talking us through the build, love it! Next up... something European? Like a BMW straight six? Or a supercharged Jaguar V8?

[@geoffwatches]

I agree wholeheartedly what he said, basically.

[@geoffwatches]

I agree wholeheartedly what he said, basically.

[@kevilgandhi]

Ya also agree

[@hendrickmanurung1992]

Rotary Engine Rebuild could be awesome Quinn, make it happen please 🔥🔥🔥 much love from Indonesia 🇮🇩

[@lgncars]

would be sick

[@Ordinary-drummer]

brrrp brrrp brrrp brrrp needs to be a quad !

[@villanerdica]

pantengin aja channelnya rob dahm , ada project 12 rotor itu

[@hendrickmanurung1992]

@@LvLdGhost already did bro , but we're talking about Quinn here

[@hendrickmanurung1992]

@@villanerdica udh bg, cuma kn kita pengen lihat si Quinn rakit mesin Rotary jga bg

[@newfie8181]

I can watch Quinn swing wrenches all day! Love how he explains everything and how they work.

[@Hawkdriver511]

Love his level of knowledge. Some of the best videos on the builds. You make it look look easy!

[@taitsmith7173]

Quinn should have his own engine building masterclass. Also, I've been waiting on my Supra shirt since November.

[@HigeYatsu]

Quinn, you gotta do a rotary engine build for your FEED FD--would absolutely LOVE to see that!

[@jz_jules]

engine rebuilds with quinn are always my favorite part

[@jdmj0]

I think any popular tuner engine - LSx, EJ, Rotary, S54, EA888 - the list can go on and on! The rotary would make sense if you continue on your modernized F&F car series with the RX7? 😁😁

[@Boostisablast]

I’ve owned a turbo one for 11 years and it’s been broken in my shop for 5 years. I have other cars but this video just inspired me and she will live again!

[@Mercil355]

I would pay for automotive classes if Quinn was the instructor. I would pass too because he explains everything, even why things would break or what best practices he is following so well. I also like when anyone in the shop is joking about not knowing something but being clear that they don't know something. That is the key to learning and growing, admitting you don't know something.

[@pellegrini8419]

I enjoy watching engine builds as well. I just wanted to say that anyone with a bit of mechanical knowledge, a factory service manual, and tools can do this! Its like legos for big kids!

[@xanneri8994]

At least once a week I think about selling my AP1 in 2015 and always feel a little regret, videos like this make it hurt all the more lol, even on the inside the s2k is such a beauty.

[@AmazingSpanoMan]

I've never been so excited for a build and sad at the same time. S2000 is my dream car let alone a built one.

[@dailydriven991]

The Mad Scientist! These are by far my favorite videos on this channel. I’d love to see a rotary or LS build like some have said but top of my list would be a Porsche flat six or even a 944 build. They scream like nothing else and the engineering is incredible. Would be something new and cool for the channel too.

[@vladimirarzadon]

Another job well done by the MVP Quinn! I love these types of content! Learning so much from them. Keep them comin' please! Flat 4 next? 🎉

[@jp335i]

I love watching Quinn work his magic on engines! I think building a Mazda 3 rotor would be cool!

[@yoadaam2940]

Ported rotary engine would be incredible! Also a great chance to get an RX7 on the channel!

[@SugarWolf09]

My favorite part of any build you guys do! So much fun watching Quinn tear down and rebuild engines.

[@gogedo00]

Man Quinn is really HIM

[@javiermadrigal7589]

Throtl team is awesome!! The videos are always entertaining and full of knowledge. Build a VQ35DE!

[@Laeeqahpaulse4031]

The master is once again at work making it look easy great job Quinn

[@haac4825]

Just having @ CAFE and watching the S2000 Engine Rebuilt. Just sweet. Throtl #1.

[@Darkslide2AR-FE]

I love watching engine builds and this was an absolute pleasure Quinn. I look forward to your engine builds in the future.

[@JpoT852]

Quinn is a magician in the engine bag tremendous work man 🤙

[@ricardosandoval4831]

there is something that is just so satisfying about watch engine build videos

[@aaron38my]

Heck, just rebuild any engines in the inventory which u haven't touched. Watching ur rebuilds are damn satisfying. I'd send my engine had I'm not on the other side of the world.

[@alexstava]

I love engine builds, I'd want to do it myself

[@ro63rto]

28:12 - gonna need an oil filter relocation kit.

[@patrick19gl]

I went for the comments for This

[@mattrenegar476]

yuuuuup. was wondering who else noticed this

[@SpecificationR]

It's molded into the bottle the direction on how to pour the oil bottle (the little circle). You're pouring it upside down. Keep up the good work 👏

[@fmvtec85]

It’s so satisfying, just watching him put everything together nicely and with care. 👍

[@stevehunter7190]

Love a good Quinn engine build video 👌🏻 enjoyable to watch and educational without being overly technical. Keep up the good work 👍🏻

[@94andrae]

Been watching you guys for some time now, I’ve learned more about cars than I have from anything and anyone, thanks allot for the videos, one day I’ll have a car to modify as well.

[@jacoblacroix9024]

Great video! Quinn killing it again on another engine build. He has a great knowledge on all the engine parts and explains everything he is doing! Keep up the good work guys😁! Hope to see you all on June 3rd !

[@TheRealRobotMongoose]

I gotta keep voting for a Volkswagen VR6 rebuild. MK3 Jetta GLX with the 12v VR6. They sound so good!

[@Peteblz1]

Engines build videos are my favorite. So cool! Quin be like hold up. Measurements montage. ❤

[@philliphoward5113]

Love watching Quinns engine re-builds, really interesting maybe a rotary re build or a Golf VR 32 re-build ?

[@adrianhernandez8820]

Would love to see that VG30 from the 300ZX get rebuilt!

[@TonysTechAndCars]

I am amazed while you were in there, you didn't clean all the old oil stains!

[@scott8277]

Always a pleasure watching and learning from your engine build videos

[@BulliKid]

Love engine build videos! 🙌

[@babypinkbean]

Skipped the last 2 episodes real quick so I can watch the engine build 😂 ill go back afterwards

[@Killerconceptz]

This channel has grown so much with Quinn!

[@immortalrises4299]

Quinn makes it look so easy, great job. Adding Quinn was a great decision, he is so knowledgeable

[@Selfinspired82]

Love the engine build series...would love to see either a bigger engine mayber LS or a rotary/dorito

[@axioaxis9539]

Quin is fire god Liu Kang of engines 😂 love watching the solo engine builds!

[@tylerwestbrook9299]

Going to rebuild my F22, can’t wait to get started!

[@fettyvsop9935]

We really have to appreciate quin work

[@Fk8_Theory]

People like Quinn are a valuable asset

[@abrakadabra5023]

GOD I LOVE THE S2000 SO MUCH

[@corygrimsrud1474]

Definitely should have had those rods machined since you're using a different fasteners. Sure you can get away without it, but it's not technically correct. Also im really surprised you didnt open the ring gap up. The oe gap was set for a 200hp engine, this will likely run over double the factory power level. I dont understand why you wouldn't have opened them while apart 🤷

[@mickeymang6]

Facts. I would have replaced the rods AND pistons. Full head machine work and block. This is just basically an OEM rebuild with ARP hardware. Might hold the power, but for how long? I think THROTTLE has a set budget for these builds and doesn't want to go over that. If it was their car to keep, I think they would go all out.

[@fmsdaman1]

Factory unopened engines run fine even at 600hp for years. Been done a bunch of times. I'm sure it will be fine, plus if the kit ever comes off because the new owner wants to go back to NA the ring gap won't be too large.

[@jimc6481]

This is excellent!!....Thank you. I reference back to your video during my build of my F20c1.

[@Joey-rx3qv]

These videos are amazing. Good work boys.

[@gorillawarfare7523]

These engines look so relaxing to build. Wish I had a garage or money to start.

[@justinreed659]

I wish I loved anything as much as Quinn loves fluid dampers... 😅

[@rayclaudio2574]

Thank you for this video.. i have a f22c1 sitting and this gives me hope

[@Ryan-xs1dh]

You should rebuild one of your follower's engines! jus incase, i got a 327 in a 67 chevy here in Cali, that needs help pretty bad 🙏

[@joshuareid4933]

I'd love to see y'all do something with a BARRA engine some time!

[@kellgee35]

No shit, just said the same thing

[@kuxoverlandingtrailingadve5047]

Very Nice Gentlemen! Keep up the great work

[@arturojsoler3]

this is therapudic ! thank you so much for making videos like this ! cannot wait to rebuild my F20C!

[@Mario-go5qo]

FINALLY MORE HONDA BUILDS 🙏🏼 I would LOVEEE to see a FG4 2015 civic coupe si build !!

[@MakeingSimpleHard]

The 1.8T out of an old golf or gts jetta would be a sick rebuild. they can be a little annoying, but a lot of fun regardless.

[@DawahTrucker2024]

Quinn is an amazing mechanic geek

[@jordieduffell7914]

Man he's good with that sealant tube!

[@DoHHHH26]

Beautiful video, he made everything look very effortless.

[@dmurray1200]

These are my favorite videos on here

[@jorden5652]

Man i love watching Quinn build an engine!

[@NuSwayze07]

Top notch workmanship Quinn 🔥

[@joshuajobin2170]

Cobalt SS Build would be sick!! LNJ with a turbo kit would be so sick

[@mylesbestianich5045]

H22A! ive always wanted to see a full prelude engine build with turbo

[@is2fiddy3]

Quin is a boss! I enjoyed watching this.

[@thegametinkerer]

Quin definitely knows his stuff

[@DimZin]

Best build mods for those and the k series engines are bolts/studs,head gasket and block guard. Everything else has been taken care by Honda

[@PotatoGamerNOS]

I would be over the moon for a 3sge/3sgte build

[@gymmy972]

Killin the engine game Quinn. Keep it up man!

[@joshuaarango9973]

Lmao I love how the oil filter disappeared once Quinn slapped the turbo on 😂😂

[@mattrenegar476]

came here looking for this comment lol

[@isse009]

I think you should rebuild a Volvo T5 engine and put it in the 300zx; would be awesome :)

[@jermainemorgan171]

Smooth video bro bro. Respect from Jamaica.

[@adammorris7003]

I feel like you guys should definitely do an OM606, that'd be badass!

[@vinuyajohn719]

Damn i really love seeing the Modern Eclipse🔰🔥🥺🇯🇵

[@ادهمرستم-ل5س]

I hope that you will add an Arabic translation, your follower from Syria, and I love your content very much🤍🤍🫶🏻

[@chufueher8106]

You guys should do a 3000GT engine rebuild and go in depth. There’s so little information about these cars and it’s be cool if there was some more content on not just the car but the engine.

[@jdmfreak22]

They already built a 3000GT, so I guess building an engine for one (hence, building another one) would not be in the cards for them.

[@EmjayDTube]

An engine build for the EJ or FA series of Subarus would be dope

[@job-naxco.1611]

Gotta get out to FuelFest LA to see the cars and meet the crew. 🤘🏽

[@throtl]

Please do!

[@victormateo4618]

Either a 3sgte or a 5sgte would be dope

[@goodcitizen7064]

Great content, as always! I think you guys should do an old Mazda, Ford Probe GT. I loved mine and it was a super fun car! They look awesome too!

[@indycog]

Bought one of the new shirts and plates! I love the JDM merch!!!

[@SunoPics]

time for a Ej build! would love to see a hybrid ej25 block with ej20 heads

[@gustavoservinjr3851]

Quin is a engine master 👍🏼 🔥🔥

[@Wallerree]

A rotary would be amazing but I just don't think there are enough people out there using them. Oh man...build a killer 3-rotor...But aside from that I'd say a good ole fashioned LS for the swap crowd. Like some giant N/A monster.

[@Mlppo1]

Kinda wish they painted part of thr block, either way quinn always does an amazing job

[@filip000]

Do a VQ37HR with a supercharger!

[@chadjohnson362]

Either a 13b or a 3sgte would be nice for a next build. Great vid bro

[@laloguerrero6757]

Underrated VR6‼️‼️‼️

[@richardfarmer6570]

Great video Quinn, thanks for the detailed explanation.

[@saleemkimani898]

The best oil filter for s2000s is the oem one

[@NorthsideSpeed]

Great video! K20 or SR20 rebuild would be sick.

[@jimmycammarano]

Quinn gotta do a 3SGTE motor. The numbers I've heard these things out out seem mythical. Put one-to-one the test parts and accessories must be so cheap it's not very new. Thing it's slept on. Pleeeaseeee