TurboCharging an EG Honda Civic - OEM+ Exterior Makeover | PT6

Our Turbocharged 1993 EG Honda Civic is Complete!
Continental ExtremeContact Sport 02 is our Recommended Summer Tire: bit.ly/3YwVD1v
Simoniz Car Care Products: www.simoniz.ca...
Konig Ultragram 15x8 +36 wheels: konigwheels.co...
LINK Ecu Can Gauge: dealers.linkec...
SEM TRIM BLACK Paint: amzn.to/4aNk2Wt
Icon Era Parts: / icon_era_parts
Ebay Rear Wing: www.ebay.ca/it...
Ebay DNA Smoked Taillights: bit.ly/43M5gg4
Exceed Front Lip: www.icbmotorsp...
Ebay Blacked out Headlights: www.ebay.ca/it...
Denji Headlights: www.denji.com/...
Pro-Series OE+ brake pads and rotors: www.partsource.ca
Annex Suspension FastRoad Pro coilover kit: annexsuspensio...
use code SPEEDACADEMY for $125 off any coilover kit from Annex Suspension
Hardrace suspension arms from Stage Four Motorsports: www.stagefourm...
use code SPEEDACADEMY for a 5% discount on Hardrace parts from Stage Four Motorsports
Kleanstreet for recycled golden era Honda parts: / kleanstreet
StrippingTech blasting and powdercoating: / strippingtechnologies
Konig Ultragram 15x8 +36 wheels: konigwheels.co...
Konig Heliogram 15x8 +36 wheels: konigwheels.co...
#SpeedAcademyContinental
Join Our KZbin Community: goo.gl/n4m3Ez
Our Patreon page: / speedacademy
BUY Merch Here: www.speedacadem...
Support The Companies That Support Us:
Continental Tire: bit.ly/3YwVD1v
Valvoline: www.valvoline....
Turn14 Distribution: turn14.com/
Pit+Paddock: pitpad.com/
Konig Wheels: konigwheels.com/
Canadian Tire Pro-Series: www.canadianti...
Enkei Wheels: enkei.com/
Vibrant Performance: vibrantperform...
Rays Wheels: rays-wheels.ne...
ANNEX SUSPENSION: annexsuspensio...
$125 OFF use code: 'SPEEDACADEMY'
Fluid Film Corrosion Protection: www.fluid-film...
AEM Electronics: www.aemelectro...
DISCLAIMER:
Speed Academy videos are solely for entertainment purposes. Never perform any modifications to your vehicle that will void your warranty or in any way violate your local road going laws. We assume no liability for property damage or injury as a result of any of the information contained in this video. Use the information provided at your own risk.

[@lgbfjb6450]

The black CF rear spoiler was definitely the way to go. Looking good with those wheels and the black accents.

[@F0BBYLEE]

CF fitment looks waaaayyy better.

[@Intheseaabovethesurface]

I think the glossy wing painted with the same paint as the lip would bring the look together. Keep up the good work, boys!

[@tinchoelhoyo]

Agreed!

[@petec2583]

I came here to say exactly this. Also, headlights good, tail lights bad 😂

[@wparsons]

x3 on the trim paint on the rear spoiler

[@kc550]

Don't forget about the mirrors! Maybe just buy a set of knockoff spoon mirrors. They really tighten up the overall look of the car.

[@EkowMensahMotorsports]

Came to say the same thing. Also the slightest of tint on the headlights will tie it all together.

[@renjamun]

When you guys are cutting plastics, angle grinders aren't the best. Get a blue point mini reciprocating saw. The fine blades leave a nice edge and you can drill the corners to "connect the dots" in a way. The drill bit then leaves a nice rounded corner.

[@mapwheel00]

Unpopular opinion but I really liked those first eBay headlights. They compliment the tail lights and overall look better.

[@ashm0re]

Same. Not a huge fan of the clear corners and chrome. With all the black accents, those first headlights would've really set it off.

[@nicholaskallmyer9865]

I third. The first headlights matched the "agressive but understated " theme better.

[@Shododaan]

The carbon fiber wing - painted to match the black trim would be really sweet. Great progress on the Civic!

[@robinjansen8522]

This thing really needs the Spoon style side mirrors to top it all off 💪

[@Bob-ir4lr]

Yep. Always hated the stock EG mirrors but the aftermarket spoon visibility also is terrible

[@renndub]

I have them. They suck. You can't see very well out of the passenger side mirror

[@robinjansen8522]

@@renndub but you look dope

[@Booka3141]

14:25 a wild Moose appears. Also, screws connected via the threads into the material, bolts connect via clamping force,

[@TJDST4]

What about machine screws and nuts?

[@TranceFur]

But what about applications where bolts thread directly into, say, the engine block or a brake caliper bracket? Instead of using a nut

[@wooable]

I'm just happy you didn't go with those blacked out ebay ones. Reminds me of ones you see on clapped out riced civics lol. Loved the chrome Denji ones you chose.

[@Shiftlinkage101]

I like the full OE look. Bumpers, spoiler, and lights are perfect from the factory.

[@twin2civicgaraget2cg75]

Euro headlights and amber corners is the way to go

[@Minibike-Isaac]

All clear taillights for sure an the headlight an corner light combo is perfection!!! I love the clear denji lights an oem clear corners

[@maxrieker1591]

Watching all your civic builds makes me want to do my own project! Keep up the great work Pete and Dave!

[@trevorhsu6357]

I can’t even get around to putting sway bars on my Miata 🙃

[@silverbulletS197]

The period correct with clear corners look real good with the white paint! Solid choice! The black housing on 2nd set of lights would fit darker colored vehicles

[@darksidegarage910]

You guys did an amazing job on the exterior. I’m 40 so it matches what I envision when I think late 90s eg. Perfect!

[@bgee461]

Late 90s was wild bodykit time with ground control coilovers and 17" rims... probably racing hart c2 or something. Xenon kit or wings west was the top of the game... later on Tsunami.

[@1BadRAMLimited]

Eg looks beautiful! Tasteful mods not over the top and I love it!

[@surfaceenergy]

6:15 the large uneven panel gap between the C pillar and EK spoiler would drive me crazy

[@cloudyview]

If you're painting the lip, paint the carbon spoiler to match - it's the best looking of the three, and has the best fitment (hadn't made it to that part of the vid yet - sand and spray the carbon!) 👍 Front lights are the best choice of what you had, but I think you need to match the front and rear. If you're going with the dark rears, switch to the dark ambers and dark denzos

[@owenfrohbus8198]

Your choice of headlights is perfect and yes please, get the period correct full clear tail lights❤

[@AM-yy5tp]

The first front lip, tinted windows all round and lose the mud flaps. The blacked out ebay headlights looked killer too...

[@rafaeltorres8943]

i don't understand how these guys don't have a million subs yet

[@phantom2488]

i love the carbon with the light inside of it think it fits better

[@scotthancock3405]

Clean build guys. I like the fact you paint trim pieces to clean the car even more. Many don’t do that.

[@benjamincasebolt2959]

The ambers and the projectors look SO good!! I liked the first Denjis

[@andysgaragetherapy]

I spotted a Moose!😂 This was such an enjoyable build series. Always love an EG hatch! EF build really did bring me back to my friends build back-in-the-day! Excited for more fellas!👏🏻

[@mikezammit3482]

The smoked headlights and corners look the BEST. imo. Smoked tails for the W

[@toughpuddinbuilds1972]

The first headlights tried takes your eyes away from the bad paint job on the bumper, the chrome ones seem to bring out the chips around the grills

[@chrisokeefe6280]

Loving this build boys…plus there was a rare sighting of the southern Ontario Moose!

[@NickofTimeRepair]

OEM white taillights do look the best.

[@randyej2pr]

Clear Denjis always good to switch things up.

[@rthomp03]

Front and rear lights should match. So either both smoked or both clear. And use the "carbon fiber" rear wing, but sand it and use the trim paint so it matches the front lip. Then it would look much more cohesive, rather than a bunch of mismatched parts from the stash.

[@steffenflindt8670]

Clear tail lights is the perfect 90s match with Denjis

[@Hunac-Ceel]

Editing has been on point as of late, great action sections follow with great dialog and explanations. This build was so so good, can't wait for the Dyno ❤

[@uknterror508]

Love the headlights, convinced me to get a set myself. Believe it or not alot the trend is reverting back to oem taillights, the smoked or the 50/50's are falling to the wayside quickly. Heliograms look too close to rpf1 and personally at this point Id run the wheels that come on spare tires before using a free set of rpf1's or te37's for that matter. Really love the outcome of this one guys!

[@Chris-de4km]

If you’re painting the lip you should repaint all the side etc

[@noahvelasquez223]

Keep the smoked tails and put the 3rd brake light carbon wing on, paint the front lip black like you said. Love the build you guys always kill it with every car you touch!

[@aMcConghie16]

Best auto channel on KZbin!

[@henryoppenheimer]

Definitely made the right choice with those headlights

[@jngtruong]

Nailed the front headlight and corner light combo. For the rear lights, i would rock the OEM amber turn signals. I would prefer the OEM front lip as well. Nonetheless, great build. Enjoy the contents you guys put out each weekend.

[@JBaek24]

You picked the right headlight/corner combo! period correct and clear corner looks so good. Need the rear to match!

[@lachaineal]

The best moment of the week-end!!

[@mpwr321bhp]

I think smoked has had its day, OEM Plus with Clear for the win lol. Cracking job on this one as always, looking forward to the track battle.

[@marrerowski]

Black ceramic paint on the front mount intercooler would definitely complete the look. Build looks great guys!!!

[@jacoblacroix9024]

Great job Peter love the transformation can’t wait to see it on the Dino

[@MikeStewardII]

You guys should have painted the carbon spoiler (w/ center taillight) with the SEM Trim Black and ran that.

[@jamiefurrier4231]

Car looks perfect with pick of front bumper headlights and rear towing and taillights 🔥🔥🔥👍👍👍

[@Tech-bv9oj]

I like the white paint matched wing, white lip, and paint the side skirts too!

[@jorden5652]

Good call on the lip, I'd say go with your gut and get the clear tails and maybe throw some of the trim paint on the spoiler

[@BurningRubberNz]

I love those crome projector headlights and the tail lights look good with the tint not to black good work guys

[@The_Redkween]

That’s a nice bubble!! Great job guys!

[@esobeegarage]

Rear wing in gloss white. Rear taillights in red/clear. Keep the front headlights with what you chose (clear)!

[@dumbestoyster]

I like the dark projectors...I'm almost almost 50

[@dumbestoyster]

And, aren't flat tip screws, called machinist screws

[@Yang5st3R]

You guys brought back some good memories. Alteza style! Sweet build.

[@witchcraftauto]

A WILD MOOSE spotted!! Really like the black front lip

[@louielou8262]

@20:35 Oh man, I can't wait for that build!!!🤫🤜🏼🤛🏼

[@dude_0458]

The dark front headlight with the smoked amber corner light were way better looking. It gives a good contrast with the white paint. It also match better with the theme of the car black and white. Like the black wing, black door handles and black side skirts and lips. Please consider installing the dark headlight!

[@GIZZMOTORSPORTS]

Love it, looks fantastic

[@damonblalark766]

Yes on the clear lens

[@brandonwebb4574]

The build looks great!

[@frozenpete788]

Brian from paint society used the same trim black on the crx restoration, it's just the right product for that job

[@yjsaabman]

Front lighting choice is on point. I think the red/clear will compliment the front lighting the best. I do feel the hatch spoiler should be body color, but that's why there are options, right? Everyone can personalize things to their taste!

[@1_of_4]

The car looks great. Awesome work.

[@TheJediJoker]

Paint the CF rear spoiler in the same SEM Trim Black! The CHMSL is an essential safety item for a street car. Too easy to miss that someone in front of you is braking if their car doesn't have one.

[@fewhavestrength]

great vid and thanks for using the amazing 80's synth music, cheers!

[@NoRogeR]

Clean build guys

[@Lmonkeyy7]

I believe they’re called “machine screws” amazing progression on the eg btw guys

[@LearnToRace]

I'd go for the carbon spoiler but either paint Matt or gloss black to solve the clear coat issue and plus it gives you the 3rd brake light

[@ConiferConnoisseur]

Turning out awesome!

[@Busydadgarage717]

Can't wait to see the dyno and drive! Amazing job guys!

[@jp2246]

Another great build!

[@josephmatuszak3855]

I'd go with a semi-gloss black on the front lip and duckbill spoiler. To match the mirrors and other trim.

[@FiftyFiftyAmoney]

Headlights are great, I'd go OEM tails - keep up the great work!

[@steverichardson6920]

Paint or wrap the CF wing your choice in black or body colour, fitment is good and the centre brake is worthwhile having 🤷🏼

[@spazda_mx5]

A bolt is designed to be used with a nut, a screw cuts its own thread or is used in a pre-threaded hole. Also, those probably aren't philips screws, but are JIS !

[@dionward57]

Smoked tale lights 👌🏽👌🏽

[@cnovalles73]

Love the taillights

[@Barracuda1807]

Red clear rears, solid orange signal lights in the front

[@craigvirgin8461]

Correct headlights. I like the rear lights too. If you're painting the lower part of the front lip black, use the carbon roof spoiler to retain the third brake light?

[@toufuevang-c3z]

Put the molding line on the white front lip. Thatll give it a black lining for contrast with the side

[@scorpiolexx]

I think the first dark headlights are looking the best for the overall style...especially if the rear lights are smoked...they fit then with the whole car...

[@bigmanbuilds]

Denji headlights are always the way to go

[@ef7andapp170]

Watching you swap out various headlights gave me flashbacks from "back in the day". I was soooo close to buying black housing projector headlights off of ebay, for my old EF. So glad I didn't...those were hideous! Thanks for taking me back.

[@gearheadgarage6829]

Cleanest geo metro on KZbin

[@renndub]

😂😂😂😂😂😂

[@efrengonzalezrlsh6637]

Carbon Fiber!! 💪🏽💯💪🏽 wing

[@rhubarbpie2027]

GOOOOOOOOOOD MORNING SPEED ACADEMY

[@andreslopez-jg5mn]

Def liked the carbon fiber one with the brake light. I seen a EG with a carbon tail that’s a nice option. N carbon hood. All love really enjoy your show

[@adrianprado1099]

Keep those lights they look great, the orange makes the car look more older 16:04

[@Tech-bv9oj]

I like the dark headlights and corners

[@MyWolffy]

There are a few people who 3d print a gauge pod insert for that vent where you made one. They offer it in a double as well if you wanted 2 gauges

[@pauldybro7636]

Like the OEM+ headlights. Let's see clear tails with them.

[@davidschreibeis8647]

Always loved the own tail lights on my old eg

[@jakemachajewski8358]

I think the rear wing in sem true black would tie everything together 👌

[@anthonysoto465]

Very nice Clean build 🔥🔥

[@Martin-ec7fd]

The black headlights with black trim.👌

[@BlairCradick]

I liked the ebay headlights, and current tails don't look horrible. I'd be painting the spoiler in trim black to make it match the rest of the black stuff, maybe give the mirrors a coat of trim black also.

[@BushidoPhoto]

I've done these bumper modifications to my 2019 STI to get the FMIC to fit.

[@VncentValntine]

At first i was repulsed by the dark amber headlights but once the bumper cover was on I reaaaally liked them lmao!

[@brokentradgedy]

MPH clusters look so much better than the busy KPH clusters that have the whole dial filled with too many numbers. MPH is king

[@TheGhungFu]

The SEM Trim Black is great stuff. I've used it alot. Just don't get alcohol anywhere near it! Even after it cures, alcohol will ruin the finish. Ask me how I know.

[@tompettersson3814]

looks good. i personally would go with rear wing, doorhandles and mirrors in trim black.

[@FLXSWAG]

It’s the euroglass for me 🔥