What I like about the older car is like a time capsule like going back 30 years when time where good & no doom and gloom
@TURBOTRISTO2 жыл бұрын
That’s true man great outlook
@RexH2 жыл бұрын
this thing is gonna absolutley rip when its done. veery excited!
@TURBOTRISTO2 жыл бұрын
It will be soo nice to drive I cannot wait, shame about all the missing parts
@lloydshondabordello2 жыл бұрын
Have never clicked off a Nighride video so fast, this was definitely the better E30 video to watch. F A N T A S T I C UPDATE. Is this a case that you can pull the stickers off the rubix cube and fix em 🤣 Far out, the parts should've come with a custom 10mm hand to fit between the mount and block 😉 Those are some tight tight tight tolerances but you absolutely slayed. LIKE A GLOVE. You'll have to get some more of the 2 people jobs sorted out next week. I'm glad you're looking into things to keep everything simple and serviceable 🤘 Keep spooling Turbo Tristian ✌️
@TURBOTRISTO2 жыл бұрын
Thanks bro appreciate the support
@lloydshondabordello2 жыл бұрын
@@TURBOTRISTO my pleasure, jjust spitting truth. You've been going at lightspeed and I'm thoroughly entertained and impressed.
@bluecheese8612 жыл бұрын
Hey, I recently did an M52 swap on my E30 and you might need to get an external bottle for the coolant. From water bottle it pulls to the bottom below the intake and the one behind the block goes to the heater then out to the radiator. Dont take my word for it :)
@TURBOTRISTO2 жыл бұрын
thanks blue cheese i am still stuck on this I have been instructed by the vehicle owner to park ythis project for the next month and focus on the vl , but I honestly cannot wait to get it done!
@shakcs6529 Жыл бұрын
Did you finish it I am trying to start my build
@RasanGrace6 ай бұрын
Hello, love the build, wanted to know how did the vaccum hose delete in your intake manifold?
@TURBOTRISTO6 ай бұрын
I think i melted it shut I honestly cant remember
@0618ramon Жыл бұрын
The powers steering pump did you have any issues with clarence for the front sump oil pan ? If so how did you fix the issue? Iam doing a M52B28TU swap myself.
@TURBOTRISTO Жыл бұрын
no clearence issue
@yellowjoe.2000 Жыл бұрын
excellent video. is the wiring harness, ecu and electronics difficult with the m54? i assume this would be the same level of difficulty with e34 and e32 bmw?
@TURBOTRISTO Жыл бұрын
Yep all the same difficult with all models, I didn’t do any of the wiring in this one, so I can’t say for certain it comes as part of the kit
@yellowjoe.2000 Жыл бұрын
@TURBOTRISTO i see! there is a wiring kit specifically made for e30?
@TURBOTRISTO Жыл бұрын
@yellowjoe.2000 there sure is
@yellowjoe.2000 Жыл бұрын
@@TURBOTRISTO that is great. maybe that same company can make a custom wiring system for an e32.
@TURBOTRISTO Жыл бұрын
email them brintech customs look them up on facebook and insta and tell them i sent you
@Savage_K2 жыл бұрын
Hello , nice vidoe am currently doing the same swap , could you please make a tutorial video about the wiring and gearbox shirfter mounting
@TURBOTRISTO2 жыл бұрын
The wiring kit is from brintech customs, the shifter I can do
@맨케이브바버샵11 ай бұрын
Hello, m54b30 e30It's a swap. I'm not nervous. Do I have to delete the immobil from the eCU? This is the last gate. Please tell me how to do it Thank you.
@TURBOTRISTO11 ай бұрын
For this one I would speak with an Auto electrician
@zudo189 Жыл бұрын
Hey bro, im doing the same swap Does everything from e46 fit to e30 (engine mounts)?
@TURBOTRISTO Жыл бұрын
Yeah it does
@zudo189 Жыл бұрын
Thank you bro❤️
@nickcosta43262 жыл бұрын
Hey man awesome car. Just done the same swap. M54 but I’ve decided to go turbo too. Hoping for close to 500bhp 👌
@TURBOTRISTO2 жыл бұрын
Mint
@nickcosta43262 жыл бұрын
@@TURBOTRISTO if you decide to go forced induction.. please keep us updated!
@TURBOTRISTO2 жыл бұрын
stay subscribed for the full build, just waiting on parts to get it finalised
@nickcosta43262 жыл бұрын
@@TURBOTRISTO will do. Mines gone down for dyno and tuning this morning ☺️
@shakcs6529 Жыл бұрын
@Nick Costa how is it holding up?
@goransugarevski64392 жыл бұрын
Looking great mate
@TURBOTRISTO2 жыл бұрын
appreciate it
@ElectronicCircuits Жыл бұрын
how you install water temperature sensor? any photo? its on the custom metal duct? thanks
@TURBOTRISTO Жыл бұрын
I’ll have to look into it
@Slot1Gamer2 жыл бұрын
like a glove!
@TURBOTRISTO2 жыл бұрын
Yeah it’s neat
@goorgert1364Ай бұрын
That plastic thermostat housing is going to ruin your day at some stage. Batter swop it out for aluminium ASAP.
@TURBOTRISTOАй бұрын
Yeah it’s been swapped
@kodieread35448 ай бұрын
How'd you about the electric throttle setup in terms of mounting it?
@TURBOTRISTO8 ай бұрын
E46 pedal bolts in and the wiring plugs in to the e46 harness
@kodieread35448 ай бұрын
@@TURBOTRISTO doesn't need an extra mount? As the factory e30 plastic pedal just clips into the floor
@TURBOTRISTO8 ай бұрын
yep so does the e46 pedal and there is a 10 or 12 mm bolt aswell
@kodieread35448 ай бұрын
Cheers mate
@akiyz_xd17512 жыл бұрын
If i install the engine and the gearbox, its probably upside down 😅 Its looks hard and i probably cant do it
@TURBOTRISTO2 жыл бұрын
Haha nah it’s not that hard
@rafsangr8974 Жыл бұрын
does the oil pan from m54b30 e46 fit on e30?
@TURBOTRISTO Жыл бұрын
No the e30 and the e46 have very different engines this engine is from And e46 however and it fits in the e30 perfectly with no issues
@fantasteur984411 ай бұрын
Did you use stock e30 subframe and stock e46 engine mount ?
@TURBOTRISTO11 ай бұрын
Yes, I strengthened it though
@fantasteur984411 ай бұрын
@@TURBOTRISTO what drive shaft did you use ? Stock
@TURBOTRISTO10 ай бұрын
tail shaft and drive shafts are custom from brintech
@moonbrothers90982 жыл бұрын
Where's the kswap?
@TURBOTRISTO2 жыл бұрын
Sitting in the civic waiting it’s turn
@nitrogearaustralia39492 жыл бұрын
@@TURBOTRISTO its nearly done isnt it in your latest video
@Monstero5o Жыл бұрын
Whats that rear diff and subframe rated for?
@TURBOTRISTO Жыл бұрын
Around 1000hp Ive seen the R200 nissan diff hold 1500hp with the right centre