It’s much quieter than my Niche Duo. It’s also getting much better results.
@JeepBigE8 ай бұрын
Great video Barrett. Can't wait to get mine. Appreciate seeing the noise level and how easy it is to access the burrs.
@scoobtoober2975Ай бұрын
For the longest time, the ek43 was the gold standard. In general i didn't like the espresso from it at coffee shops. I always thought it spun too fast. I think lance confirmed that, or hoffman did too. I'm looking forward to this grinder and speed variability. Burrs are pricey but if the time comes to try a different one. I'll be happy there is a huge selection.
@RSURRECTED8 ай бұрын
Thanks to you and the entire team for being so transparent and listening to enthusiasts! Hope to own one down the line
@scoobtoober2975Ай бұрын
My sette 270 is in a sound box, double wall and it's horribly loud. The primary reason i just bought this 83v. I'm looking forward to it. Bought form you.
@EspressoOutletАй бұрын
Much more quiet than the 270 haha, but almost anything is.
@MSnyder998 ай бұрын
Awesome! Very helpful video- I was wondering about both the sound and the carrier.
@greysuit178 ай бұрын
Looks like a really nice baby EK43s!
@Feledwards2 ай бұрын
I just purchased this grinder. Pretty impressed.
@minimax2628 ай бұрын
Thanks for performing those noise level measurements. Would you happen to have those also for the (regular) DF83 for comparison? Thanks!
@sxmxdrifter8 ай бұрын
Looking forward to getting mine 😊. Good vid Barrett 👊🏼
@amourb71338 ай бұрын
How is it in comparison to the Df83?
@michaelhsu20518 ай бұрын
This seems to be a great choice for my next-level grinder, but when will we recieve our Legato? CAN'T WAIT!
@nutdazzler6 ай бұрын
Other reviews say there are some stalling issues. I am sure the motor is strong but it's likely a safety stop to resistence. Is it a problem or is this being changed/updated before final shipping?
@DaddyMakesCoffee8 ай бұрын
Nice informative video bro. Would like to see if the burr carriers can be swaped for goast/blind burrs.
@tomy29888 ай бұрын
Have you had a chance to use the MP burrs in the 83v? Right before the early order bonanza Joe did last week I had received a 64v and installed my MP burrs and I’m really happy with its performance for espresso. I’ll be looking for when you get a chance to compare the 64v and 83v with MP’s. Thanks for the content!
@timmcintosh92398 ай бұрын
Glad to see you don't have the SLM right up against the grinder. Ideally, it should be placed at a distance similar to where your ears would be during operation. Perhaps more like a meter away.
@EspressoOutlet8 ай бұрын
I usually stand about 20" away at my home counter. Most likely will be closer to 30 depending upon height of person.
@danielpugh27528 ай бұрын
Looks good to me. Main query would be whether the big silver power button can be easily changed? Or will the production one be less garish?
@EspressoOutlet8 ай бұрын
not planning to change. Very nice and effective during daily use.
@rpinarreta8 ай бұрын
Seems that this has an auger to control feed rate as opposed to a pre-breaker.
@deenman608 ай бұрын
Both mazzer zm and bentwood have kinda the same bean feed/auger/burr position.
@skatcat318 ай бұрын
I didn't see any option to try and get the grinder with all burrs. I'm guessing there isn't any special pricing there? XD
@erikasoldit8 ай бұрын
Thanks for the video! I’m excited to get mine. So excited I dreamt it came in and surprised me. Ha ha! So, I upgraded to the SSP HU Espresso burrs. Will it come with those installed or will it comes with the DLC Burrs installed and I’ll have to swap them? This video gives me the impression I’ll have to swap them.
@EspressoOutlet8 ай бұрын
Think most direct ship orders will come with DLC. SSP are aftermarket and would be user installed.
@erikasoldit8 ай бұрын
@@EspressoOutlet So I’ll get both burrs? That would be nice to compare.
@djmanosv4 ай бұрын
Which is best burr for espresso 90% medium roast
@EspressoOutlet4 ай бұрын
Stock burrs work great.
@jakevan19698 ай бұрын
Awesome, thanks. I would be using it with a 1200 W heat exchange espresso machine. This grinder is 600 W bringing the total draw to 1800 W. I have a 110 V 15 A circuit that runs a max 1800 W. Do you think I could be running the espresso machine and the DF 83 V at the same time without tripping the circuit? 👍
@EspressoOutlet8 ай бұрын
probably fine as neither will run at peak at the same time.
@jakevan19698 ай бұрын
@@EspressoOutlet Right, okay. Ot, I could switch off the espresso machine while grinding. Thanks 😊
@snuffalobill12508 ай бұрын
Is the hopper removable? Would love to 3d print something smaller instead
@EspressoOutlet8 ай бұрын
yes
@jazz37rio8 ай бұрын
Is it good for press and moka pot? Which burrs work best for what brew methods?
@EspressoOutlet8 ай бұрын
Either burr for press. Moka probably ok with both, but the brew do not go quite as fine.
@rogeryin8 ай бұрын
are the burr mount using a wave spring system? or a different system?
@EspressoOutlet8 ай бұрын
Different. They had to change from wave to coil for this design.
@quaza938 ай бұрын
How does the dosing cup fit in the portafilter?
@EspressoOutlet8 ай бұрын
theres a small indention and it uses magnets
@victorsangco14207 ай бұрын
Will you recommend it for small cafe?
@EspressoOutlet6 ай бұрын
No
@victorsangco14206 ай бұрын
@@EspressoOutlet because there is no hopper or because of the motor?