Turn Anything into a Synth Patch with SampleOne XT | PreSonus

Vocal sampling has been around for quite some time, but has become increasingly popular with modern technology. Did you know you can easily sample anything and use it as an instrument in Studio One?
In this brief tutorial, PreSonus Product Specialist Gregor Beyerle demonstrates how easy it is to record your any sound to turn it into a unique Synthesizer Patch with the SampleOne XT plugin.
_____________
Learn more about Studio One:
bit.ly/3z69lLz
Get more creative tools with Studio One+:
bit.ly/StudioO...
Watch more tutorials from Gregor: • Studio One with Gregor
Watch the Studio One Minute:
• Studio One Minute: How...
Turn Your Voice into a Synth Patch with SampleOne XT | PreSonus
#presonus #audioproduction #musicproduction #proaudio #sampling #recording #GregorBeyerle #StudioOne #S1withGregor

[@cranstjs]

Had a lot of fun with this today. I just sang a middle C note and held it for about 20 sec. Normalized it. Changed the Amp attack up some, lowered the octave one on my keyboard, and added some reverb. And I could get a pretty close rendition of 10cc intro sound for I'm Not In Love song, where they spent 3 weeks recording every vocal note and using a separate track for 16 tracks to blend chord sounds of vocals. Now with Sample One, the one vocal C recorded and mapping it across the keyboard, and I essentially have that intro sound. Cool.

[@presonus]

This is awesome! Way to go. -GBY

[@ostmusiccomposer]

Please! udpate sample one! It is very outdated, give us more freedom, I want to modulate sample start!

[@machinemadepleasure8496]

This is how I turn my monosynths into a polyphonic one!😀 You can sample multiple notes for a little better quality.

[@presonus]

Great idea! -GBY

[@Wide_as_Life]

AMAZING ! And so beautiful result ! Love my STUDIO ONE ! thanks Gregor ! 🙏

[@Frank-in-NY]

Wow! Totally unaware of this feature. It may not be something that I would use too often, but it's another tool in the creative tool box. Thanks Gregor!😁

[@Fullscore999]

Two thoughts; a) how the sampler can handle more complex sounds than the easiest: whistling? b) how to improve the quality of the extreme registers by recording more than one sample? What was showcased was just an easy mid-range.

[@missepicmandy]

This sounds like x files whistle 😂

[@presonus]

I've always loved that sound! :D -GBY

[@CXtheproducer1]

The samplers need a major update, it’s ridiculous (SERATO SAMPLER, REASON MIMIC, LOGIC SAMPLER. We don’t need a new synth or etc we need the sampler to have manual slicing (120 slices) scale and key lock on the sampler. I love S1 but this is ridiculous

[@thamilanban]

There is a burning issue I am dealing with. S1's rendered audio quality is much lesser than its playback quality. It is a serious drawback. Can you help with this?

[@FPChris]

How do I sample an acoustic drum kit in the same way and assign it to Impact?

[@marcwilliams4097]

Such a practical alternative to utilize the tools that are available.

[@sekaabrantie]

I'm kind of wondering why SampleOne XT can only slide in mono. Why not in stereo too?

[@Wolfbabypuppylove]

Jeez Gregor dont they let you out i could swear thats a comode in the background 😂

[@jfls23]

The option to "store track preset" doesn't pop up for me. Any thoughts?

[@the80way56]

I’m still on 5.5 so I can’t store the preset😢but at least I can do it over and over😅

[@permadeaf9915]

Your enthusiam is infectious Gregor! I always appreciate that watching your videos makes me feel like I'm going to a friend's studio and getting some pointers!

[@presonus]

Thank you so much! It makes me so happy to read that. -GBY

[@digitaldroo]

When you map out the note across the keys, do they maintain the same note length (i.e. are they time-stretched), or do the higher notes get shorter and lower notes get get longer?

[@distico_]

A little feature update on SampleOne XT would be good too :)

[@herealbutler]

I wish they would do a update in general, every other DAW is smoking us right now 🤦‍♂🤦‍♂

[@victory-tq6vv]

Added another dimension to his production actually made it better awesome a practical, actual production tool thank you 🔥🔥🔥🔥

[@presonus]

So glad to hear it! Thank you for your kind comment. -GBY

[@sergeyscorin]

Does it detect key automatically ?

[@meinekleinegartenwelt3110]

Can't believe i never use it. I realized later that the Audio (Mike) Recording via Sample One is now a Midi File, what makes it so easy to work on it. I recorded just one Note from my new Flute. Great, and so much fun. Danke

[@sinkway2606]

That reverb sounds sick. I only wish that functions Fade In and Fade Out will be added in SampleOne in future update. Otherwise i can't remove the clicks and pops at the start/end of a sample. That's the reason why i prefer third-party samplers in S1

[@KINGDELAFURIA]

1:25 XD that was so 🏳‍🌈

[@TtableWhey]

Store Track Preset doesn't seem to be available in Version 5.5.2. Is that functionality only available in Version 6?

[@jamesconraadtucker]

You don't even need to set your start point of the sample. You can set a gate threshold in Sample One, and the start will automatically be set. I use Sample One a lot for many of my instruments from classical guitar, to my Fender P bass. It's super easy and fast, and as Gregor points out, create your own sounds when presets won't cut it.

[@conrow1157]

Where are the samples get saved?

[@THECHURCHCAT]

Gregor, I can't find my answer anywhere on ya'lls video tutorials so this is the best way to reach out to you for me at the moment cuz I don't know how to reach you. I imported a MP3 song I recorded to a new record and mix template. I know the song is 68 BPM and the template is set for 120 BPM so when I go to change the tempo down below, it time stretches the original!!! even when I establish the tempo before I load the template, it still stretches the recording. I want to adjust the tempo without affecting the recording of the MP3. my inspector window has no tempo or time stretch option. By the way this behavior only recently started, I never had this problem with MP4s

[@GamerGriaBros]

This might help! Click the audio click in your arrangement, then press F4 to bring up the track settings which will be a strip on the left side of your screen. In the top section of the strip, you'll see "FOLLOW TEMPO". If it's highlighted in blue then click it to turn it off. StudioOne will now play the clip without any time stretching. Let me know if this helps.

[@presonus]

Hi there, please make sure that your Audio Tracks are not set to Tempo "Timestretch" in the Track Inspector (F4 key to open) at the top left. They must be set to either "Don't Follow" or "Follow" if you want the audio to play at its original tempo instead of the Song tempo. If you'd like this to be the default behavior for all newly created Audio Tracks in your Song, then you can change this in the Song Setup: capture.dropbox.com/l1FjqhRmYADYcwJo If you want to pre-audition Audio Files without any time-stretching to the set Song Tempo from the Browser, make sure that the Metronome icon is not activated (= blue): capture.dropbox.com/C0StDx38Pq9gWXjE Hope this helps! -GBY

[@Metalpazallteway]

Does it perform legato up and down? I felt it had some kind of synthetic legato not sure. Great work though

[@dagalost1949]

Can you explain that creepy voodoo doll dancing on the top left of my screen at start up?🙄

[@Magnetic1908]

That is a really nice reverb. Is there a way to record mutes in Studio One? Thanks Gregor!

[@presonus]

Hi, you can automate the mute-state of any Channel - either with your mouse, or in real-time with a MIDI Controller. To do so, simply right-click the mute button of any Channel and select "Edit Automation 'Mute'". To record Automation in real-time using a MIDI Controller, set the newly added Automation Track to "Write", "Touch", or "Latch". Once you're done, set the Automation Track back to "Read". Hope this helps! -GBY

[@Magnetic1908]

@@presonus thanks Gregor, my favorite S1 instructor. I’ve recently been using MPC and love the track mute feature and would love to do that in S1 also. I still love making beats in S1 and being able to record mutes will be great. I tried recording mutes in track but not channels. Thanks for responding as always.

[@davidm2745]

Awesome! Great information and demonstration as always Gregor, thanks!

[@WysicbeatzHitmaster]

So and this way you can also make one shots. Great

[@Grabulosa]

Ouu. Can someone please tell me how to find the 3D-IR Library??? is in the presonus Sphere? Many thanks for doing that Gregor! :)

[@presonus]

Hi, please check out this video to learn how to install the brand-new 3D-Impulse Responses for OpenAir2: kzbin.info/www/bejne/fp-pqZeKo9Z6r5o Hope you'll enjoy! :) -GBY

[@gizmogearloose3391]

This is FANTASTIC! I've always been wary of using Sample One because I thought it would be super complicated to use....and you just proved me wrong...THANK YOU!

[@presonus]

So glad to hear that! Thank you. -GBY

[@DrumsEngineering]

This is fantastic! With every vid I learn so much about the power of Studio One!

[@presonus]

So glad to hear that! Thank you for your kind comment. -GBY

[@dennystreet2454]

Just bought Atom and Studio One Pro. Nice start of my journey :)

[@presonus]

Awesome! Welcome to the family 🔥 -GBY

[@madiimad]

Hi! Will this work with Studio one 5.2? Thanks for all your tips and videos. ❤

[@presonus]

Hi, this will work in Studio One 5 as well - although the OpenAir2 Reverb is only available in Studio One 6 Professional. -GBY

[@paulgormleymusic7673]

Gregor - U da man ! 🙂

[@toddwmac]

Great reminder! Thanks.

[@raman_korshun]

Great job! Thanks!

[@arkpnbf04]

Good stuff 👌🏿🎉🎉🎉 thanks 👍🏿

[@iliravdyli4109]

Hope we see an update to sample one

[@charlesbhatara7020]

amazing...just so simple...

[@IC3RTIF1EDI]

another great video!

[@RockinSG]

How cool! Thanks!

[@stefanwalcott]

Love me some SampleOne

[@daveowenmusic1749]

Wonderful!

[@Theofficialmastermine]

your a genius !

[@presonus]

Thank you so much! You're too kind. -GBY

[@MaPaPir]

Thanks! How did you tune the whistle?

[@ImNotQualifiedToSayThisBut]

Quite possibly whistled a C?

[@MaPaPir]

I figured that too. But to record directly and whistle a c note pitch perfect into sample one is not so easy. Is there a simple way to tune the audio after the recording?@@ImNotQualifiedToSayThisBut

[@ApexErich]

I was wondering the same thing. Does Sample One auto pitch the sound so when you play a C note it's pitched to C regardless of the original pitch of the sample sound?

[@tonyaston5731]

I'm pretty new to this. I sampled a "gong" sound off a metal water bottle which was off key but I added a tuner to the track and dialed it into C with the calibration knob and then saved the track preset..

[@tonyaston5731]

Just to note I had adjusted the Root in Sample 1 to get the sample close to the Key note before using the Tuner Calibration to fine tune.

[@user-hz9kl6ji5s]

thats not cool. super super super outdataed sampler