Turn ON & OFF any Electrical Appliances/Device by Mobile | Wi-Fi Controller

Wifi Smart Controller for your Home and for any Device to Turn ON & OFF by Mobile
In this video you will learn how you can turn ON & OFF Contactor, Bulb, Motor or any Home appliances by using your Mobile.
i mean that i am going to give tutorial about Wi-Fi Controller which can Turn ON and OFF any Electrical Device of Your Home,
this controller can also connect with Alexa and Google Home so that you can use your voice command to Turn ON OFF any load.
I Hope You are going to love this video
Thank You
Arun Gupta
[e-mail]
══════⊹⊱≼≽⊰⊹═════════⊹⊱≼≽⊰⊹══════
TELEGRAM :
telegram.dog/El...
FACEBOOK : @electricaltechnical
/ electricaltechnical
INSTAGRAM : @electricaltechnician02
/ electricaltechnician02
══════⊹⊱≼≽⊰⊹═════════⊹⊱≼≽⊰⊹══════
My gadgets for KZbin 📺
Camera 📸 For video Recording
amzn.to/3z3W9XM
Mic 🎤 For Sound Recording
amzn.to/3kpUyaK
Tripod Stand
amzn.to/3BajZmn
Overhead Stand For Recording
amzn.to/3z1rzhm
══════⊹⊱≼≽⊰⊹═════════⊹⊱≼≽⊰⊹══════
Electrical Device For your Home which you Should Have
Wi-Fi Control Smart Plug top
amzn.to/3dAZrJA
amzn.to/3hcO6Sr
Multimeter for electrician
best - amzn.to/3w7Vbry
Low Price - amzn.to/3wfF1MC
Water Level Controller
Single Tank - amzn.to/3xdcrwY
Double Tank - amzn.to/2UnvJAX
Motor Starter
2 HP Motor Starter - amzn.to/366AlhL
2 HP Motor Starter - amzn.to/3xhVtxw
Toolkit For Electrician
amzn.to/3AmK1T5
══════⊹⊱≼≽⊰⊹═════════⊹⊱≼≽⊰⊹══════
Related video which You Must Watch
Smart Wifi MCB for Home
• Smart Wi-Fi MCB for Ho...
Voltage Protection Device
• Protecting my Home fro...
SSR Connection
• SSR Connection With Se...
Wi-Fi Meter for Home
• Smart Single Phase Wi-...
#electrical
#connection
#automation
#engineering

[@Technicalbilal786]

Very good job, good explanation but I don't know why you connect contactor. You can do same job with out contactor and many other controls with u can do with contactor like NO and NC. As I see neutral for bulb u connect together on A2 and LINE for bulb you connect on A1 together (for contactor run and bulb).

[@krisvanmileghem7036]

As you mention this schematic is totally wrong. It works because he uses the contactor as simple wire connector ( WOW) to the lamp. A1 and A2 ( relay) are there to steer contactor. but are not used to steer. L1-T1 etc are there to be connected to lamp or consumer. NO means Normally Open , NC means Normally Closed when not powered.

[@truthprevails996]

Where do I can buy this switch

[@Hoxford2005]

If am ti apply this in automatic change over system for off an on of generator which sources of electrical supply am to use to engize the wifi controller?

[@neilstephenalun]

How do you turn the MCB back on if the electricity is turned off on site when modem and router is off after we turned off the MCB remotely?

[@ramchauhan6010]

Where would this controller will b available please ?

[@oladosvinzuella6998]

thank you so much , I was going to take an entire Arduino course to be able to do this but you made it easy as a drink of water

[@banjadenisvictor3338]

If you want to learn to build your own I suggest you continue with Arduino

[@banjadenisvictor3338]

Here you utilizing somes app. What if you want to build your own app and consumer

[@Cold913]

I need a miniature Battery Pack to hook up to this system. Do you have any recommendations?

[@mbeca5176]

which distance can you switch with phone from that cnc switch

[@krisvanmileghem7036]

The contactor is completely unnecesary and is a 3 pole contactor for 3 fase AC current. The contactor is used as wire connector. Hahahahaha Completely wrong schematic. Of course it works but the contactor is in for NOTHING. Steering the contactor is done at the right hand side.... This is fun to see someone explaining something that he clearly does not understand himself.

[@TheElectricalGuy]

To turn ON & OFF Motor or any Heavy load we have to use Contactor so u have connected that. The lamp is only to show that contactor is ON or not

[@krisvanmileghem7036]

@@TheElectricalGuy Your contactor is totally wrong wired. Remove all wires . Connect lower 'N 'from Wifi switch to Lower 'A2' from contactor ( relay spool ). Connect NO ( means Normally Open) from -Wifi switch to upper right screw A1 of contactor. Connect the lanp between L1-T1 or L2-T2 or L3-T3 . I'm sorry but you're clearly not an expert in electricity. Even if you put a heavy load ( can be 3 phase) NOT a milliampère is going through the contactor in your example. The contactor is there for decoration. The electrical guy?? I don't think so.

[@krishnav3352]

How much this products

[@NELSONLUBANJWA]

Good teacher

[@RANJITKUMAR85729]

Wifi lanth kinidur hoti

[@ArunKumar-yw3sp]

Hindi me jankari hai

[@romanojoshuachristian6499]

Hello Mr. Electrical Guy what's the app that you've used?

[@vijishan6072]

Why is bulb connected to the same contacts on the contactor. It looks like they can short.

[@GladysAndy-b8b]

Please how can I get this smart breakers

[@DeRoyalGoldtechnology]

Pls make vedio on how to use wifi breaker to control multiple appliances

[@kimkeoelectrical]

Very good

[@maheshmanian]

Very nice

[@garomahabtamu4731]

Attractive house hold light control. From were we get wifi controler?

[@jaezae5947]

I love it!

[@ikpalian4413]

Wow! Sir please make a video of Two Transformers on parallel operation

[@ARMANI-gr2fb]

I have one question power failure and phase failure time what u do

[@snrnagas]

Great video.. where can we buy the CNC wifi switch

[@MANJUNATHDN-xc7nb]

Please !Where can I buy this?

[@chukwudiemmanuel8665]

Sir please make a video on how to connect safety relay please

[@kofidoenanenu-qs2rq]

Can l use switch instead of push button

[@simonpeter7335]

Thanks for ur teaching

[@darelyouta1720]

thanks to you sir,you know it.

[@amarabinate]

Comment programmer sur 24h

[@basheerahmedmusiri2613]

Sir can we r use this device disten how many length without sim card use

[@TheElectricalGuy]

You will need a Wi-Fi Connection and after that you can operate from any corner of the world

[@azomjohnngozi9633]

Nice job 👍

[@azomjohnngozi9633]

If I can work with you I will be very happy

[@shatruganmalakar7508]

I'm totally confused why u used contactor

[@TheElectricalGuy]

Just to demonstrate that if you need to turn on and off a heavy Load then you can connect with Contactor

[@morrisjones4432]

Great job l love that

[@morrisjones4432]

Great job l love that

[@juicespirit]

Good morning! It appears that it is no longer possible to buy a Wi-Fi controller with S1/S2 output. However, I have come across some controllers with L/N input and L/N output only. I'm wondering what the wiring method is for connecting the S2 to the contactor. Should I connect the L output to the contactor? Thank you in advance for your assistance. Great video.

[@TheElectricalGuy]

yes you have to connect L output to the Contactor A1 Terminal and (if you like you can use N output also, you can connect that to contactor A2 Terminal)

[@PLM990]

Where we will get

[@naraladinesh4253]

Were will get to buy​@@TheElectricalGuy

[@Aarondjanie]

Please where can we get some the Wi-Fi sensors

[@TheElectricalGuy]

You Can Buy and check the price by this website cnc-official.com/discount/electrical

[@basic_electric2026]

Nice

[@Aarondjanie]

In ghana

[@ayindeadekunle8003]

Good job

[@futuretech4829]

Nice

[@kylo5418]

Nice

[@shahbazali8802]

Nice

[@MoxdonzAbdu-fm2tj]

Wonderful 😮❤

[@vprakash9703]

Hi Arun Gupta, It's Excellent to understand and i ,we want to know the starting device contactor. With out having mobile sim Inside if it's paire with user mobile like only one side whether it will work as a remote ?. Or both must have internet mobile connection?. What is the equipment cost and where to buy.?

[@punisher8429]

Thx.

[@abdullawaheed6472]

H

[@newgmail3983]

How to connect L-N on Wifi breaker output. Right is N Left is L Is okay?

[@newgmail3983]

Or No neutral