Turning A Salvaged Car Into A Street Legal Race Car Part 10

[@amanahmed1148]

If you want to keep traction you would need to put the spoiler down at a slight angle (20°-30° gradient). If you want to keep speed do 15°-20° gradient

[@frederikrossen9962]

Graphite Man yesyes

[@N911GT2]

Spoiler is not going to do anything with an airflow like this car has... looks cool though.

[@Thechandler419]

@@N911GT2 please tell me more on your logic. Cleetus doesn't run the wing on Leroy when he races because it slows the car down and it's essentially the same style with no panels and a lot of cage work

[@mrmedium7984]

@@Thechandler419 leeroy has a windscreen. This cars wing sits in a low pressure spot and is nothing more than a decoration.

[@A.G.Rich51]

The best way to find out about the downforce is to put it in a wind tunnel. Because there is no redirected windflow, that wing may create lift versus downforce.

[@marouxi1077]

Boys, Why not beat Law Enforcement to the punch! As you said this car will be a "cop magnet", so once you've the plates on it... Drive directly to the Sheriff's office with the car, enter the building introduce yourselves, show the paperwork and invite the Deputies to come look at the kit car. Once they see it, have them make out a "Field Report" stating that this car is "Street legal" and ask them for a copy. Keep that copy with the car at all times for the future stops you'll undoubtedly have. Also "INSTALL A SHOP FIRE EXTINGUISHER & FIRST AID KIT IN YOUR SHOP3 somewhere easily accessed!

[@tkomow2]

Yep, good idea! Be preemptive! You will get stopped just because they don't know what they're looking at on the street.

[@shhshh572]

it’s not really a shop it’s more of a garage .

[@fidelis7727]

Doesn't mean they shouldn't have safety equipment. It's never a bad idea to have a fire extinguisher or first aid kit close at hand because you never know what can happen.

[@micheleiad5846]

You are so right... I have been trying to get the Goonzquad to recognize that they have to have ashop Fire extinguisher and First aid kit somlewhere easily accessible within the shop. A CO2 or Chemical Fire extinguisher is the best. These boys work with heat, welding equipment and sharp objects; They have THOMAS the CAT that can knock things over and become like Mrs. O'leary's Cow was to Chicago!

[@nathanunderwood6920]

sych a dad comment

[@raveltammeleht6278]

for daily use, use 1.5 deg downwards, for track use, go a bit more agressive, like 10 or such, but be aware of drag aswell :)

[@ethanstupindis7565]

There ya go👍👍

[@keithwittman4741]

@@ethanstupindis7565 more that 50% rear weight, no need for a wing . No reason for Porsche to even have a rear wing. Other than it showing off.

[@keithwittman4741]

I think it looks cool though.

[@kaikart123]

@Dave Iauco you are a fucking idiot.

[@matess3655]

"No reason for Porsche to even have a rear wing" ok lol

[@billnalder1017]

Thomas the Technician AND the Co-pilot!!..nothin that kitty cant do!

[@rustedratchetgarage6788]

I call my cat construction kitty cause she steals nuts and bolts while im workin

[@thecrew1756]

Gloss carbon fiber wrap the hood to match the wing 👌🏼

[@dacker71867]

Like the carbon idea! Don't like the gray

[@domenicozagari2443]

Il try 45 degrees angle . for the wrap you can mix some gas with some clear silicon and brush it on. The angle of the radiator pushes the car uo. If you are going to paint it boil the paint it gives a glass finish, you can brush it by hand.

[@FIXBROZ]

Always remember cheap wrap is almost impossible to work with. Get some 3m or vvivid and try again. Good video, waiting for more!

[@sirwhitecrayon2499]

I'm no pro, but my buddy wraps for a living and I've hung around his shop enough to learn about vinyl wrap. They're using the squeegee before pre-stretch and not using relief cuts. On curved surfaces you should only squeegee once you get the wrinkles out. If they follow instructions they can find here on youtube they would be able to wrap this thing no problem. I still think they're better off painting it nardo grey and then adding clear bra or wrapping it in Avery Real D High Gloss Carbon Fiber vinyl.

[@MEQUPWER]

u need soapy water under it, duH

[@AndreasLarsson95]

Carbon fiber wrap, just like the WAAAAANG in the back!

[@AndrewSandilands-tk6st]

Andy Meek Good shout, I was gonna say the same thing 👍🏻

[@sgtfives7043]

Absolutely!

[@89ludeawakening1]

Yep I just left a comment that says a light to medium grey carbon wrap would be perfect.

[@sgtfives7043]

micah fuller The grey just doesn’t match the look at all imo. Everything is black and blue. It’s not my car though 🤷🏻‍♂️

[@Gantzz321]

carbon fiber wrap, done by a pro

[@famousadio]

Whatever these kids do for a living it looks like they are spending their money right.

[@chandlercowart8731]

KZbin is their living lol

[@Warex06]

They fix cars and film it then sell the cars for profit and get ad revenue from their videos. 900k Subscribers, they make good money

[@tscholli4469]

Electric ist the future;)

[@LUMLEY92]

@@Warex06 now 1.3m! Making good money!

[@TH3L3G3ND]

@@Warex06 now 1.72m! Making good money!

[@qendrims4876]

Hey guys first of all you must change the exhaust To straight Pipe this thing deserves a Loud noise and for that colour you must combine with the tail with Carbon fire

[@goonzquad]

Qendrim S gotta pass inspection first

[@UKnoImSoGood]

@@goonzquad get an AL title. No inspection

[@chadalcock7275]

I keep thinking that it needs a stinger exhaust like an old VW Baja or sand rail.

[@danspeek1661]

@@goonzquad just curious did u guys build this project to eventually sell or this your personal vehicle? Just wondering cause I can only imagine how much $ u guys dumped into it . but this thing is awesome nice job you guys are good at what u do

[@bosoares]

Hood painted in matching blue is my vote

[@LoBo91dx]

Electric blue

[@ibefonzie]

I agree hood matching and even the mirror/turn signals matching blue.

[@gremotorsports]

I vote black and bright blue theme

[@raymondtuckerjr1886]

I vote blue too

[@DHFHades]

match the blue with a carbon stripe on it

[@DestroyCooperative]

i used to do wraps... the trick is to start in the middle and work your way out. the heat gun is only used for getting it to form around complicated shapes. try not to stretch it unless you absolutely have to. never ever work towards the middle .... always squeegee out or those creases start and if the adhesive touches itself at all its toast. another trick is to peel only half the backing off so you only have to manage getting it to lay smooth one half at a time. good luck!

[@travisnicks3688]

Put soapy water under the wrap and then Squeegee it out. But why wrap your paint skills are on point. If it were me I would color match the panels to the blue on the seat belts and put a matching pin strip on the lip of the rims . Then everything would come together.

[@bambocaw]

I know the channel is about rebuilding cars and it's amazing! But I feel like it's more about watching Thomas grow up! ;)

[@goonzquad]

ChrisW for sure

[@bambocaw]

@@goonzquad Thomas reminds me of my cat Molly (she passed away a few years ago) she loved to be involved in everything I did even working vehicles.

[@willemp6432]

Mia culpa..

[@hernawansyafei8829]

Yeahh me to man haha

[@davidalston31]

I love that cat

[@1one3_Racing]

Wrapping for beginners, same as tinting and even applying large stickers. Fill a spray bottle with warm water and a little soap and spray that on the surface first. It will prevent the vinyl from sticking. Then as you apply you squeeze the water out and it sticks.

[@realunboxing8525]

Man Tomas is like the best cat on KZbin 😺

[@RadRelics]

FYI Be careful driving crazy on public roads and recording it. The cops are starting to use youtube footage to bring charges against drivers.

[@raymondtuckerjr1886]

Good lookin' out!

[@nick7.3]

Ikr it’s anoying

[@craigvarela2047]

I thought this was filmed in Mexico

[@thisismerica5721]

@giothebest1234 Thats why people say theyre in mexico. the US government cant try you because they dont know its filmed in the us. the the Mexican government cant try you either because it wasnt ACTUALLY filmed in mexico

[@RadRelics]

@Cruzredeye I am sorry you don't get it. I am sorry it went over your head. Wow Just Wow....

[@chrisroncker6285]

spray windex on surface you're covering, and squeegee it out. That eliminates creases and bubbles. Super nice project!

[@carsonmarshall5736]

And on the top surface to lube the squeegee

[@ernieking2664]

You really need a grill to protect that radiator.

[@elcheina7302]

Ernie King I thought it was an intercooler? For the turbo.

[@BrandonNZ1234]

@@elcheina7302 yea its an intercooler lol. so its sweet with out grill

[@willr69420]

Thomas needs his own KZbin channel!

[@derekmorren]

Instagram or Twitter

[@banlasanprinceeduarda.81]

indeed

[@Kenpachiii_Bankai]

@@banlasanprinceeduarda.81 i concur

[@Yaco_Taco]

This is his KZbin channel

[@zachh298]

@@derekmorren he does have an instagram @thomas_helcat

[@jasoncarson369]

Soapy water works great for wraps... wet both surfaces... lay it down then once you squeegie out the water from under the vinyl, then the wrap adhesive sticks to the surface

[@dalemelancon7597]

yall made a street legal Octane.. where my rocket league people at??

[@Yorn2000]

Hahahaha hell yeah

[@conar7153]

Rocket league sucks lol

[@feliciabates6492]

lil Duke LEAVE

[@MrSoull]

@@conar7153 Anything sucks when you are trash at it... GTFO!

[@Kiingtong]

just hit GC a week or so ago for my first time ever, too much fun to play

[@southpawsgarage]

SOAP AND WATER...SQUEEGEE IT OUT....I WANT A RIDE!!!!..LOL..

[@Jester123ish]

Yep this, putting it on dry is next to impossible.

[@armandssakne1868]

Yeah, water! You guys forgot apply water before wrapping.

[@scienceinengineerings.i.e.4845]

Carbon fiber wrap on all body panels would yield A high dollar, light weight Effect.

[@mxjustin2795]

Don’t put the wing all the way down but not flat put it in the middle (like so they will see)

[@matthewcaine5036]

Mxjustin 27 x❤️

[@bastaudio]

Don't know if anyone from DF Goblin is watching but I 100% will buy one of these when I get the chance because of these guys!

[@bluejack644]

I dig the hood. My first car was a VW rail buggy, back in the mid 80's when I was about 14. I saved up money raising tobacco and got a rail buggy with 4 additional sets of rims and tires, all for $350. and it ran great. Had the chrome header trumpet exhaust pipe. I had a blast with that old buggy.

[@tylerammori5941]

Looks so cool love this build and the others

[@TPRPTech]

Get a custom Goonzsquad wrap with your logo or a number

[@itsKeMonte]

Ted Pollard good idea

[@joejerkoff9095]

Would look dope if they could wrap a logo similar to the one on the intercooler

[@FIXBROZ]

That would be cool

[@djwilliams9842]

Yea that be nice colors that go with the wheels an frame

[@davegrooters2377]

Hey guys, from an airline pilot, as far as the wing goes, mounting it at a higher angle will create more downforce but also more drag. Drag increases at the square of speed, so if speed doubles, drag increases four fold. At the speeds this car can go, it probably won’t affect things to much. For drag racing and some twisty roads, a moderately high angle will probably provide the best combination of downforce without to much drag slowing you down or using to much fuel. Great work! PEACE

[@nicklansford3980]

Get someone to wrap the hood in carbon fiber to match the wing! Also, I wrapped the roof on my car, you have to lift the vinyl off the car, pull it taunt and squeegee it down. I had the same issue on my first attempt!

[@nicklansford3980]

Moze yeah. I understand though, the pro’s make it seem really easy. They say you want to make it look like it’s wrapped before you squeegee, but I had a hard time doing that, so the lift, pull, squeegee method worked well for me! Maybe @goonzsquad should let me do it... for free! 🤪

[@austinsharp2332]

CARBON FIBER hood wrap it would look so clean

[@ebrodg]

Black carbon fiber will look sick

[@Sir_Hedge]

Yeah it should match the spoiler and it will be awesome!

[@stillltippin5758]

It's crazy the quantity of work that can be accomplished by two dedicated people who love what they do

[@evilpieman]

Satin black or gloss black. Grey won't match any other major component of the car IMO it's going to look like you bought a hood off another car and haven't repainted it yet! Also, this kind of car should really be put to the test at a track day event. There's a bunch in the spring at Road Atlanta coming up and you guys aren't too far away from there in Chattanooga. This thing was made to handle and hug curves, not go fast in a straight line. Hell let me know if you go and I'll come run with you guys!

[@johnkarcher3]

Awesome build! What you guys do is so inspiring! Much respect boys!

[@MTY211]

I think Tomas will agree on a carbon fiber wrap, that would look sick!

[@linussjoberg3116]

Downforce is for high speed cornering. You want to remove the wing when dragracing

[@brochslanders1845]

I was thinking the same. Cleetus always take the wing off Leroy when drag racing.

[@jasonarap1512]

On a normal car. But on such a light car. It needs downforce because its gonna take off

[@linussjoberg3116]

@@jasonarap1512 Even if that was the case, you would need downforce on the front, not the rear. Pushing the rear end down during high speed passes will only make it airborne earlier. It's basic aerodynamics

[@raymondtuckerjr1886]

Dang kit car is growing on me

[@MrAdk25]

same .. lol I was a hater at first

[@danielpearce73]

You guys rock. My 4 year old daughter loves Thomas and billy haha. Also make sure to put a resistor in the blinkers power supply line to slow down the blinker speed.

[@jzapata5353]

A heat gun will help it stretch and bend easy and remember to stretch the wrap over the emtire object tightly and the heat gun and squeegee will push it all down amd get the detsils good

[@Xhalegaming]

Damn you left the homie with dirt on his face for half the ep LOL

[@cataca91]

you need to add downforce to the front as well

[@Vaterkrater]

Just my thought, but I know close to nothing about cars. All the weight is in the back already though, so it makes perfect sense just looking at the car and visualizing pressure on the wheels from gravity and wind flow.

[@Tricklarock]

Oh definitely, 1st thing I thought as they unboxed the rear wing!

[@Tricklarock]

@@Vaterkrater If you're thinking along those lines, then you can see how all of the things you mentioned would make the front extra unstable?

[@tripzz397]

Oh ye cause to much wait on the back it will start to lean backwards!

[@craigfotheringham1653]

If you want more downforce then the wing should be the steepest angle not flat

[@goonzquad]

Larry Garry Yea that’s kinda what we thought

[@alrikanderson]

Just think of as a airplane airbrake. If you could maybe make a handle or switch in the cab to change the wings setting to make it like a veyron but dont let it get pricy

[@akshatchauhan4426]

bro what about fluid friction it will resist accelaration if angle is too steep

[@sabereaseera1384]

Larry Garry they said they aren’t tracking the car right now and that they don’t need the most down force

[@4x4knucklebusters71]

Hood should be wrapped in the real looking carbon fiber to match the spoiler.

[@3D_ALL_DAY]

Na dont fake it, eveyone will ask is it real? "No its a sticker". It only adds weight.

[@keithfrazier2558]

@@3D_ALL_DAY too bad carbon fiber is not an option for the hood with the kit.

[@ebrodg]

Black carbon fiber will look sick

[@DukePatientFlow]

Awesome job dudes. Had to toss in my 2 cents on the hood color:. Matte black all the way!

[@tajalhamawi3589]

Put the wing straight it will minimizes air resistance for daily use but when you guys take it to the drag strip angle it down so that air resistance generates down force reducing the friction when launching the car

[@Jester123ish]

Won't help off the line and the extra drag might cost top speed.

[@tajalhamawi3589]

The car is lightweight you lose time from the rear spinning tires while the car is in its place and for the top speed the spoiler doesn’t have large surface area . Don’t throw 10 seconds to gain 1 second

[@nickstation05]

I thought the wrap was going to be purple 😂😂

[@yung_rick7447]

Nick Station Same

[@FIXBROZ]

I thought the same thing too

[@corey0189]

That would be cooler if it was the dodge purple

[@hyper_voltz1929]

Same

[@popsseb]

Think they should carbon wrap/dip it (matte or gloss) , or just matte black *proally should add clear wrap or cushion on the entree windows, maybe even nascar net

[@keepout7439]

Thomas has got his winter jacket on, cool. I love the car fellows, been watching you guys forever and I'm always entertained, thank you all ,Thomas, Wiskers, etc, super cool .

[@diedrichreimer7687]

Who's been subscribed since Thomas was a kitten?

[@FIXBROZ]

I've been subscribed since Thomas wasn't even a thing

[@arsalansvlog]

@@FIXBROZ they had another ginger cat right?

[@tristantextor9987]

I have beens subscribed since the ford truck

[@hyper_voltz1929]

Me

[@mikemack6013]

i started when they did the jeeps loving there energy good kids

[@raytrp]

Thomas approved 👍👍

[@kennethdunklin278]

Reverse lights are badass. Man that cart is super clean great job.

[@rorykelly8367]

It’s too quiet take the exhaust off

[@denniscisneros4195]

Does need an open exhaust on it.

[@ronjon9116]

Yes! The build from scratch. Keep up the grind!!

[@ShanepxII]

Gloss black hood with a Goonzquad wrap or vinyl decal over it would look sick!!! Another great option would be a carbon fiber hood wrap to match the carbon wing.

[@cattledecapitation7193]

Definitely needs a carbon fiber wrap!

[@melsilva9158]

Agreed. Carbon fiber wrap for the win!

[@mftuning2891]

fake corbon is not ok

[@cattledecapitation7193]

@@mftuning2891 I prefer real carbon too but they already have the hood, it's the next best thing.

[@andrewneumann8390]

Carbon fiber wrap to make the wing or get a black wrap to match wheels!!!

[@curtiswilcock5628]

That’s so dope looking good sounding good loving every part of this build it’s crazy 😜 man that is super cool and that grey wrap will finish it off and that wing is astounding

[@Kylie_Koku_]

For daily use leave the wing flat and if you want to slow the car down use the wing as a air brake but for more downforce leave it flat

[@berkleymyers6696]

Mr Weird yup flat for downforce at speed. That wing has a lot of kick even flat. GS even a degree of angle change will make a big difference at high speeds plus it doesn’t look like there is much aero on the front end to balance.

[@healeybob1]

Get yourself some wire loom from American wire! Looks, great guys.

[@jdubbfam37]

I believe you have to use the heat gun to get the plastic warm and playable to use the tool to flattened it and press onto it good to have four hands and keep tension on the wrap while it's being layed and applied. .

[@MemphisKi]

Paint the hood black , gray won’t match with anything else on the car

[@popsseb]

Cullen Swenson or carbon wrap/dip it

[@kevinware4476]

Wrap the front, top and sides in a high gloss 5D carbon wrap to set off the rear wing and black wheels. Plus when the light hits it just right it will give you that Nardo Grey look as well. More bang for the Goonsquad bucks.........With a nice Goonsquad decal across the rear Wing would be 🔥

[@johncolligan5128]

You should have done the wet install with the wrap, 1 tablespoon of Dawn ultra to 1 gallon of water, wet the hood and then the decal, easier to work out the wrinkles and bubbles, I did the decals in my RS Camaro using the wet method, came out very nice

[@timoto6323]

Goonzquad SQUAD 💯👌

[@noahcrocetti8669]

Yes! I was hoping you guys would upload today!

[@megas_alekos]

The best race car I have EVER seen!!! Also, you have a soooooooooooooooooooooo cute kitty cat!!!

[@sughrashamas7551]

Custom goonzpuad vynal print in black and blue

[@rezaulkreza]

Hehe Goonzpuad

[@kerryclark1926]

Maybe even a blue, gray black camo.

[@andrewdrabble8939]

One piece of advice lads. When you are running a turbo charged car and it's been driven, let the engine idle for a bit before you turn it off, so maybe fit a turbo timer. That way the turbo can spool down without damaging the insides. Plus that spoiler would look great on the Viper.

[@camsterasmar975]

Andrew Drabble Or just drive normally at lower revs for the last few miles home, unless you thrash it all the way home! 🙈😂

[@andrewdrabble8939]

It doesn't matter whether you do that or not, the turbo is still spinning and needs to wind down. One of the companies in the group I work for reconditions turbos and I have seen some bad turbos

[@camsterasmar975]

Andrew Drabble Turbos get hot...like really hot!!!! The problem with fast driving and then stopping the engine is that the oil that gets trapped within the turbo bakes in the residual heat as it very slowly cools down. When the engine is off there isn’t any oul flow. Your turbo timer option keeps the oil and coolant flowing to assist the turbo to cool down to operating temperature while you lock the car and walk away. Turbo timers usually run the engine for 3-5 minutes, at idle and without air flow. Like I said, unless you thrash your car right to your door there is no need for a turbo timer. Just drive normally for the last few miles and the turbo will cool down to operating temperature as you arrive home and then can turn off your engine just like the millions of other turbo engined owners out there. Turbo timer is only useful if you need to walk away from your car immediately after fast driving.

[@goonzquad]

Good idea! We may be doing a turbo upgrade here soon!

[@goonzquad]

10SecSleeper tons of power already, but for the strip we need more lol

[@sniper198369]

To wrap the hood you guys need to start in the middle of the hood one half at a time to wrap it properly and heat it as you seal it smooth it out to the service..

[@brodyryan5482]

You boys should Carbon fiber wrap it to match the spoiler haha! That blue and black looks sick.

[@medfordsorrells1]

Black or a carbon wrap. Fuego build boys 🔥🔥🔥.

[@ExplorewithZac]

With the wing flat, it won’t displace enough air to create any significant downforce until you’re going at a very high speed. I would go more aggressive with the angle to be sure that you’re maximizing your downforce at a lower speed like 40-80mph for example. With the wing flat you’re probably looking at your downforce peaking around 120-160mph. The time you need the downforce is around corners where you’re usually traveling slower.

[@thenewpotato3166]

Love the hard work and dedication you put into your videos keep up the good work. Oh yeah yeah

[@pcfllms]

The New Potato Oh yeah yeah

[@joshdunn101]

Oh yeah yeah

[@dancharron7098]

for your knowledge them stock wheels are Italian made. and I would suggest that the wheels you guys got are not better. you needed a wider back tire.

[@jzero32]

I like the stock ones WAY better and your correct they just need some meat on them.

[@dancharron7098]

@@jzero32 I had a 2006 Cobalt SS and a center cap was stolen from our car. so we had the dealership get us a replacement it was direct from Italy with the made in Italy stickers and flag. the one rim that was shocking to me is the Rims for Lamborghini they are made in USA imported to Italy then exported back to USA on the car... but I wonder if you eat a lot of dust from them front wheels. as also them rear tires need to be 2 or 3 inches wider.

[@Shipleyt19]

The goblin is sick! Looks like a blast!! You guys have the best videography on KZbin!

[@antonioslife02]

Why didn’t y’all go for led or hid kit for the headlights?

[@goonzquad]

Anthony life we might upgrade later on

[@antonioslife02]

I would really like to see that 😊😉

[@edwinheredia3735]

Ikr those halogen light look bad on this car.

[@antonioslife02]

Edwin Heredia they are not bad but they’re not good enough for the night not bright enough.

[@jcook3707]

Install load resistors to slow the blinking down guys

[@topgunf18hornet]

j Cook they don’t need to for it to be street legal it can be 1 or 2 blinks a second

[@garyquartley5393]

Don't think they had the front blinkers wired up. They should slow them down...

[@TheCreepersComin]

You gotta dry stretch the wrap with no heat pull it towards the corners kinda like in triangles to work all the bubbles out then once it’s nice and flat you take a heat gun to warm up the glue to make it stick while using the squeegee to get it to lay completely and stick properly

[@lgggamezz9659]

I Love goonzquad I want to fix car like them

[@dylankerns260]

Face the wing downward to get more grip on the back tires

[@stevenjohnson6362]

Carbon fiber wrap for hiood to match spoiler. And thank you for replying to your viewers it shows you care and welcome your viewers comments. Oh and if you was wondering why I spent 7 days in the hospital it was due to a rattle snake bite.

[@stephhh979]

all this done so quick? Good job!

[@maxhammontree3169]

Dude! Sick. Rippin bro. Dude. Sick!

[@eddbayes2767]

Max Hammontree limited English language.

[@espenohnstad2193]

I have been watching all your builds, and I enjoy the channel a lot so thank you for making the content. Regarding the wing; flat for speed, and angled for downforce, you can also set it up with actuators so you can adjust it on the go from inside the car if you feel fancy.... ;) One thing that bothers me tough, is you guys got a bunch of track beasts, these cars are made for a track, the Corvette, the ZL1 the Viper, and the Goblin don't waste them on the drag strip.. take the Viper back to the road Atlanta, where it met the wall and became a salvage car... taking these cars to the drag strip, is like having a supermodel at home just to make dinner.... Set it up at Road Atlanta and I am sure several of the subscribers would join in, make it a Goonsquad meet, and lets trash it at the track... :)

[@zwierzak450]

Another vid, how niceeee! U guys are damn fast! Good job!

[@yurielkadi]

@tavarish should learn a little bit with them 😂😂

[@spyarc5522]

Thomas is a man of many traits

[@Stew5166]

@goonzquad Goonzquad, ... a couple questions. Why are the wheels and tire sizes not staggered? Appearance wise, the rears would benefit from being a wider size and possibly a larger diameter. This might also benefit traction/handling. Also, the car you guys tested originally did not have a cage above the passengers. Did you choose this current version specifically for safety reasons? The open cockpit Goblin looked better to me, personally.

[@aaronharrison6181]

Sweetnesses! Your guys are awesome! Keep up the good work!

[@IndependenceCityMotoring]

Looks like you didn't lubricate the hood before putting the wrap on?

[@keepout7439]

Paint it, clear coat it to death, Nardo Grey, for real, your painting is top notch, it's fire, put a few flames on it, nice

[@ExtrzGaming]

sell the corvette?

[@crystalknight4464]

Yes the did

[@JP-fo6lo]

yup

[@firstnamemiddlenamelastnam9563]

@@JP-fo6lo how much did they sell it for?

[@goonzquad]

Extrz not yet actually

[@Mariolopez-wt9om]

@@goonzquad let me know how much yall sell it for when you guys do

[@christrujillo2568]

I remember the flops! I’d point them out in every video lol OG GOONZQUAD

[@ArunPradeepMusic]

Carbon fiber wrap and rectangular headlights would look awesome

[@tasosdaldaverenis6803]

wrap it with carbon!!!!!!!!!!!!!!!!!!!!!!! it will be like pair with the carbon spoiler!

[@corey0189]

Tasos Daldaverenis fake carbon is rice

[@flattabang]

No! just makes it look cheap.. A sticker faking carbon looks soooo bad.

[@killer_shotguy8864]

Love this build, what decals will you put on the body? I was thinking something along the lines of all models you have rebuilt

[@goonzquad]

Killer_ Shotguy that’s a good idea!!

[@killer_shotguy8864]

@@goonzquad thanks!

[@poplaurentiu4148]

@@goonzquad You know that some cool stickers add like at least 5-10 bhp right ?.. (joking) he he he..

[@miket2607]

I usually hate camo wrap themes....but i honestly think a camo vinyl wrap with a baby blue, royal blue, white and black theme would look amazing!!

[@cosp_ride3095]

Man if those coolant hoses go while you're driving, you're going to have a jet blast of hot coolant on your neck 😂

[@chase6745]

Wings are for downforce, Spoilers are for aerodynamics. Great vid!

[@NickKautz]

downforce is an aerodynamic , a dynamic of the air

[@khobbs2630]

They’re literally the same thing

[@stevendavis6088]

Start flat, the more angle you have down, the more down Force on rear but can create lift on front with the minimal amount of weight you have.

[@sirwhitecrayon2499]

@@khobbs2630 HAHA SAVAGE!

[@EnzoTheBaker8]

They're both for downforce. So are lips and side skirts. Diffusers and fairings are for aerodynamics.

[@mikecromwell4245]

Dam those are bright reverse lights. You guys are doing great looks like so much fun. I’m not able to drive because of seizures. Could one of you guys come over to my place and give me a ride in that bad little beast. Awesome gentlemen.

[@Xhandrea]

Next episode yehey. Watching from PH

[@Northrop-Grumman1991]

You cute girl I'm 10 years old wanna date and meet my mom