Turning your own scraper for $15

[@MoleValleyMaker]

That looks and works great! I've spent a lot of time when I make my tool handles. I always know what the tool is by the handle as they are all different. Thanks for sharing.

[@ScottsMiniWoodshop]

Thanks for the comment and I'm glad you liked the video!

[@zaqwsxcde1234567899]

Keep uploading videos this is really great

[@ScottsMiniWoodshop]

Thanks for the comment

[@StevenWalkerr]

I realize that this video is 2 years old, but if you happen to see this, would you mind telling me the top and bottom angles you used. Thx. Great content.

[@ScottsMiniWoodshop]

No worries. All my scrapers are ground the same way. 15 degree top bevel and 55 degree main bevel for an included angle of 70 degrees. If you burnished the edge of the scraper it will last longer. I have a video on using a burnishing rod if you look for it

[@BAILEYWOODWORKS]

Great video! Thanks!

[@ScottsMiniWoodshop]

Thanks for the comment!

[@BOSSLOVEU-SV]

I wanna see more! Plz! Mr!

[@ScottsMiniWoodshop]

I'll try to add more videos soon

[@Aday442]

Thank you sir 🍻

[@ScottsMiniWoodshop]

You're very welcome!

[@ponmalara8467]

Great video you earned my sub

[@ScottsMiniWoodshop]

Glad you liked it!

[@curtisstacy5829]

Hi, watched a video on Pinerest you made for making ornaments. Can you tell me what you used in the headstock and tailstock to hold the ornament after you drilled what appeared to be 3/8 hole in each end. Thanks

[@ScottsMiniWoodshop]

They are pen centers. Specific centers (drive and live) for turning pens between centers instead of using a pen mandrel

[@clement900]

Real cool !

[@ScottsMiniWoodshop]

Thanks!

[@hkgaming9913]

THANK YOU SIR THIS IS ACTUALLY USEFUL I WANTED THIS BUT NOW I CAN MAKE IT AND ALSO CAN YOU MAKE A RESIN CUBE IN BROWN AND BLACK COLOUR PLEASE PLEASE 🥺😭🥺😭🥺🙏🥺🙏

[@ScottsMiniWoodshop]

I'll have a full length resin sphere video posted in a few weeks

[@kurtypot9655]

Why all caps

[@kamandanu6672]

Can you make a globe world with recine & wood....

[@ScottsMiniWoodshop]

probably

[@nakanaka6973]

could you tell me what kind of HSS is good for woodturning? or any HSS will do?

[@ScottsMiniWoodshop]

Any HSS will work for woodturning. HSS comes in many grades. Generally speaking the harder the steel the longer the edge will last. There's definitely some debate if the more expensive grades are worth the extra cost.

[@nakanaka6973]

@@ScottsMiniWoodshopthank you for your kind explanation. There's too many HSS's grade and I'm kind of confused. Grad to know any will work.

[@ScottsMiniWoodshop]

@@nakanaka6973you should be able to find M2 grade HSS pretty easily. It's what most inexpensive lathe tools are made from. It's my understanding that most unmarked HSS is M2. It should work perfectly for making a scraper

[@nakanaka6973]

@@ScottsMiniWoodshop ok.I will buy one. Thank you very much.

[@asasin349]

Super master

[@ScottsMiniWoodshop]

Thank you so much