Turntable & Modern Receiver Combo | How to Choose a Turntable

An in-depth breakdown of the pros and cons of connecting a modern or classic turntable to a modern receiver -- part of a larger series on turntable setups.
Join the Deaf Man as he goes through four complete turntable setups for listening to your vinyl records. From simple, portable setups to multi-layered audiophile layouts, check out four popular vinyl listening options.
Visit www.deafmanvinyl.com to purchase turntables, cleaning supplies and records--and up your listening experience!
Follow Deaf Man Vinyl at www.instagram/com/deafmanvinyl.
#turntable #receiver #vinylrecords

[@mobileipad2]

Dude this video is perfect for someone like me, you’re st8 to the point and informative. You answered my question, minus the fluff thanks ✌🏾

[@elliotmann8882]

I almost gave up on resurrecting my turntable and record albums. I grew up during the 60's and 70's when stereo equipment was plentiful. So many problems trying to get the equipment to work correctly, I didn't know what to do. These videos will help me get back into records again.

[@MrRourk]

So much cheaper today than a couple of years ago. Hope you found a working solution

[@paloma-dove1409]

Finally someone who can explain and make sense

[@nikobuerk346]

dude. great video. this is amazing. saved me. plus no extra unnecessary info about random things not needed.

[@gilbertgutierrez4065]

Thank you so much for the information I was looking for, without to much added information.

[@DeafManVinyl]

Glad it was helpful!

[@jc2367]

thank you

[@re528]

Gracias!

[@stackels97]

This was super helpful, thanks. One question to anyone who knows, I got a yamaha rx -v363 second hand and I'm hoping to eventually run an Lp 60x turntable to the reveiver and then out to some active bookshelf speakers. In the case of active speakers, what's the go with pre-amps and phono vs line? I'm still learning so trying to wrap my head around things before I buy more equipment.

[@deefredde2210]

I have a onyko txdss555 av receiver and a pioneer sx 2600 that both have phono amp in them. I want to use a marantz 7500 receiver for speakers, but my turntable does not have an amp. Can the pioneer or onyko serve as only a preamp , where i use the marantz for my 7 channel surround speakers ?

[@rickharrold1164]

Hi there great information I have a new rega P8 and I’m trying to connect it to my Sony muteki theatre amp to it and all connected up its whisper quiet I gather I also need a pre amp ... what would you recommend ? Cheers

[@aidansaganey6604]

Hey I’ve got a modern turntable with an older home theater system. Can I use an rc to aux cable to connect the two systems and it’ll work? My turntable has its own preamp already. Thanks 🙏

[@robelite178]

I have tried everything you mentioned and my turntable still does not work. My Receiver is a Yamaha RX v377. I bought a pre amp but I learned from your video that my new turntable has a built in pre amp. I have tried the "audio and all the AV connections...nothing works

[@arupdutta7687]

I wonder if you could find a way out for this issue that I am having for a long time. I want to hook up my Kenwood graphic equalizer to my JVC QL-5 turntable. Is this possible at all? My Harman-Kardon integrated amplifier has phono RCA inputs. Cheers from Kolkata, India.

[@lenurbatalov6445]

Hi mate, I have a receiver denon, when I connect my turntable to it, it gives overloaded distorted sound. Have no idea what could that be

[@videotekatapodcast]

Hey there! Thanks for the video! I just want to confirm one point, if possible: As long as my turntable has a built in pre-amp, I dont necessarily need the receiver to have one too, correct? Thank you!

[@DeafManVinyl]

If I'm reading your question correctly, no you don't necessarily need a receiver if your turntable has a built-in pre-amp. You can just plug your turntable directly into a set of powered speakers and rock out! You will need to make sure that you switch the turntable from "Phono", which is an un-amplified signal, to "Line, which is an amplified signal." Keep 'em spinning!

[@nafanuanafanua]

Hello! I have a Vintage Newcomb EDT-1270V turntable. It looks like it might be from the 70's. I don't see a switch anywhere for phono/line so am I to assume that it needs a preamp? Thanks.

[@DeafManVinyl]

Yes, something that old does not have a built-in pre-am. That's a pretty new innovation. Good luck!

[@lindagardner4226]

I have an old her 58350m home theater system which came with sharp rp 4500 turntable. How do I connect them? Do I need a preamp?

[@DeafManVinyl]

If you have a phono input, the turntable goes there. If not, find an unused audio input (e.g. CD or Aux) in the back and try plugging it in there. Good luck!

[@terrygreen1128]

Hello , I’m trying to hook up a vintage Kenwood turntable KD 2070 to a Fisher RS 881A receiver and I’m getting no sound at all … it has the phono inputs and ground hookup in the back . The turntable was working fine with another Sony stereo system that was about the same age as the Fisher. The rca jacks from the turntable have plastic covering on the pins and do not seem to fit well in the Fisher .? ….Help , thanks

[@DeafManVinyl]

I don't know a lot about the Fisher receiver, but my guess is that it doesn't have a built-in pre-amp, which you def need. And, unlike a modern turntable, the vintage Kenwood turntable doesn't have one built in either. So, you may need an external/stand-alone pre-amp, which you can purchase fairly inexpensively. Good luck!

[@AlexAnyways]

I have a Technics SL-Q200 turntable and a Technics SA-EX300 which has a phono input. That could be a perfect match but my speakers are the AudioEngine HD3, so they has built-in analog power amplifiers. the guide specifically says "As HD3 includes built-in power amplifiers, do not connect the HD3 speakers terminals directly to the speakers outputs of a stereo receiver or amplifier". So how should I connect the turntable to the SA-EX300, and the SA-EX300 to the speakers?

[@DeafManVinyl]

They're basically telling you that their powered speakers will not work with your set-up. You've got an amplifier plus an amplifier the way you're trying to configure things, which will not work.You need old-school passive speakers (non-powered), which Audio Engine does sell (I found a pair for a Deaf Man Vinyl customer who was looking for the same thing). Look at their P4 or HDP6. Good luck!

[@AlexAnyways]

@@DeafManVinyl I made it work. I connected the turntable in the phono entrance of the receiver with RCA cables, and the ground. Then I use the Tape Rec Out to connect to the speakers with RCA cables and it works very well. Can't stop listening to my old records since yesterday. ;)

[@str8rockerma]

I have an audio-technica at-lp60-bt and it has a phono but I was wondering what kind of receiver do I need to get more power and volume because the preamp in it is not enough? Thanks in advance

[@DeafManVinyl]

So, are you running the turntable through powered speakers and not getting the oomph you want? If you can give me a few more details, I'll try to help

[@jonahart777]

Hi, I have just been left 2 vintage Technics turntables after my Brother passed away last year, they are the SL-QL1 and the SL-DL1 linear tracking turntables, the Dl1 is perfect and does all it's meant to do, the QL1 needs repairing...However my question is I have the table, I have Edifier powered speakers but no preamp or amplifier...What would you suggest I need to get the turntable running ok, many thanks....Paul.

[@DeafManVinyl]

Hey Paul - those are both solid turntables! Most powered speakers are still going to need a separate phono pre-amp, although some higher-end speakers have one built in. I'm thinking that's not the case with the Edifiers. You can get a basic preamp, connect your turntable to that (Line In) and then the amp to the speakers (Line Out). I have a NAD phono-preamp that really does the trick. Google NAD Electronics PPE 2 phono pre-amplifier, I see them coming up in the $129 range. Plenty out there, but that's one I can vouch for.

[@jonahart777]

@@DeafManVinyl Cheers for the info, I have just ordered a Rega Fono Mk 3 so that will be here in a few days, had a good look around the inside of the Ql1 and the tonearm rope is snapped and they can't be found anywhere anymore so it looks like I'll be parting that out or using it for spares....

[@nicolepisa26]

I have the Teac LP-P1000 which came with pretty weak speakers. I swear it has a pre-amp but there’s no switch on the back, so i may be wrong? Wondering how to get the quality best sound out of it. Would it work with a modern receiver and external speakers?

[@DeafManVinyl]

So, if I'm thinking of the right model, that system is not super high-power (just 25 watts per channel). It appears to be a nice set-up for the money, but it's not going to rattle the windows. And yes, it does have a pre-amp (or you wouldn't get any sound!). Technically, it is an "integrated amplifier" - there is a pre-amp and an amplifier integrated together in one box).

[@nicolepisa26]

@@DeafManVinyl Ohh ok gotcha, that makes sense, thank you!! Yeah I did notice the speakers were 25W each which was pretty low. I was able to hook it up to a newer stereo & speakers just to see and it did sound better/louder, but still sounded like it could be a little clearer. The stylus might not be the best on it either, I tried pulling it off like you did and it would not come off so I just left it😂 Thank you so much for your help!

[@davidmorgen4558]

Note the powerful Denon avr 2500 receiver Does contain a phono section on it Which does show up at thrift stores from time to time.Its usually on the cheap side fer under $40.00 .I got mine for $20.00 Ex shape. I strongly suspect it was assumped it was just a surround sound unit which Didnt have a Phone section on it, since its not easily displayed. Well worth $20.00! The same thrift store had previously had a jvc rec prior to the denon was gone shortly which you could see it did have a phono sec on it.. PS always look at the back of any used receiver that usually a sign. stick with Denon over older Jvc an sony. They sound better.. same with H.K!!

[@DeafManVinyl]

Jealous!

[@tommyboarman9678]

would i still need speakers to be able to play audio if my turntable has a built in pre amp

[@DeafManVinyl]

Sorry to be so late getting back to you on this. Yes, you're always going to need speakers (either built-in to the turntable or external ones you connect by speaker-wire or Bluetooth) The pre-amp doesn't "make sound" - it is just boosting the audio signal for a receiver or powered speakers.

[@waltwhitmanleaves]

I found a old Yamaha stereo unit a R-3 unit it had a phono input picked it up for $30

[@DeafManVinyl]

Nice! There aren't a whole lot of deals to be found anymore.

[@aapkatv09]

How do I connect a receiver #1 with phono input to receiver #2 without phono input.? I only want to use the phono input of the receiver #1.

[@DeafManVinyl]

Hey man - not following you on this. Sounds like you're trying to connect 2 receivers togethers? Or is this a typo in your message?

[@aapkatv09]

@@DeafManVinyl Yes I was trying to connect 2 receivers together I found my answer though. Thanks

[@dr34mcast]

Does a turntable/8 track/radio combo have a built in receiver?

[@DeafManVinyl]

It should."Receiver" is actually a misnomer. That actually refers to the stereo radio part. What most people mean by "receiver" is the phono pre-amp and amplifier that power everything. Technically, that is an "integrated amplifier."

[@dr34mcast]

@@DeafManVinyl thank you for your reply!

[@stephencruse6525]

what about a receiver with a phono input

[@DeafManVinyl]

Hey Stephen. Yeah, you're golden if the receiver has a phono input. If it is an "integrated" receiver - meaning it has a built-in pre-amp and an amplifier - you just plug and go. And that is usually what having a phono input implies. What kind of phono/receiver setup do you have?

[@stephencruse6525]

@@DeafManVinyl yamaha rx-a1060. Hoping it will work

[@user-SINUS]

Так устанавливать не рекомендуется- либо усилитель перегреется , либо вертушку зажаришь...

[@jorgecampos9659]

Modern receivers don’t sound that great anyway! Buy vintage receivers

[@DeafManVinyl]

Agree. Old-school receivers were purpose-built for a phono signal. Sometimes tough to keep them running, but worth the effort.

[@SouthernTee71]

Hi! I have an older Sony receiver with the phono port. I plugged the exposed wires into the "front speakers" ports. But I barely hear the sound that's coming from the turntable. Should I plug the wires into the "surround speakers" port instead?

[@DeafManVinyl]

Hey Tonya - Barely audible sound sounds more like an amplification issue than a speaker hook-up issue. That said, don't be afraid to play around with the speaker connections, You're not going to blow anything up if you hook them up wrong. Just turn the receiver off when making the connections and then keep the volume down low when you switch it back on.