Turtle Wax Ceramic Polish & Wax

[@bobbyjones2112]

So glad you did part of it by hand, because that’s all I’m gonna do is do it by hand. I got a brand new car in January. I’m going to use the Adams clay mitt first, hand polish and then use the hybrid solutions flex wax.

[@SpeckyMcSporran]

Flex wax is a great product, just make sure you leave the polish to cure for 24 hours before topping it with the wax.

[@notfound-qg2ii]

On a brand new pad you want to Prime the entire surface but very very thinly. After you do a roughly 2-foot by 2-foot section remove your product with a terry cloth towel or spur wheel, just a small circle or three small pea-sized dots. This will keep you from overloading the pad with product. Overall you did a great job!!!

[@jaywill23]

Great video, i also thought it was very runny as well. Had to see if anyone else thought this and im glad im not the only one!

[@MilesDrive]

nothing wrong with a touch of sling, look at the benefit to the adjacent panel😉...a very valid point, regarding the word 'correction', 'enhancement' is much more realistic - a common misdemeanour within the Industry😯🤣...great video my man👍

[@SpeckyMcSporran]

You're absolutely right, Andy, enhancement is far more appropriate for products aimed at novices. It's a good polish though. Thanks again for the support 👊

[@innocentbystander2673]

I'm back, REALLY enjoyed the video. My 2 cents on the wetness factor? Yes, i agree a little too much but that's a good thing imo. I used something else recently that flashed off way to quick and turned to dust. On the other hand, another one of turtles, is like milk....BUT you can work that for a long time. It also made in between pad cleaning fairly simple. Looking forward to the next installment. If anyone from Turtle watches this, aussies would like to partake in the goodness too ya know. An estimate of release date of 6 - 12 months is NOT good enough.

[@SpeckyMcSporran]

Thanks so much. I think beginners wouldn't be so happy using too little but overloading the pad shows that it still works and removes well. I think that's the sign of a quality product. Hope you guys down under get them soon! 🤞

[@Scottishboy-gg8bc]

Enjoyable informative video which I watched half way through doing my FK8 Type R. I washed it, removed the tar spots, clayed it then went over it with TW Ceramic Polish & Wax but didn't use a paint cleaner, so I hope the results will still be good. The last coating was TW Hydrophobic Sealant and I've had the car from new. Just about all the videos I see, are doing a flat surface like the bonnet. I'd like to see a car being detailed round all the nooks & crannies, of which there are plenty on the FK8. What tools would they use? This is the first time I have used Autoglym Perfect Polish applicators and the fact that they are not circular, makes it a bit easier for the tight spots. I'll finish the "Beast" off after 24 hours with TW Ceramic Spray and future freshen ups.

[@SpeckyMcSporran]

I know what you mean, modern cars are so much more difficult to clean and polish with all the crazy angles. It's certainly something worth considering for a future video. I hope the "beast" comes out looking good. For future maintenance you might like to try their Ceramic Detailing Spray or Ceramic Wet Wax. 👍

[@Scottishboy-gg8bc]

Specky McSporran 👍

[@affinitycaravanning78]

Great video. Following with interest on these Turtle Wax products. This is the first product with ceramic in the name that I'm not too scared to have a go with I think.

[@SpeckyMcSporran]

Thanks! It's not a scary product at all, just think of it as an alternative to AutoGlym that has more protection. If you use it as a system with the rest of the new ceramic range then you'll have a great set of products designed to keep the protection going.

[@jasonmjonesuk]

Please tone down background music (or volume) whilst talking please as somewhat distracting unfortunately - useful review though

[@SpeckyMcSporran]

Thanks for the feedback, I will bear this in mind.

[@notfound-qg2ii]

Haha.. I have to Google what a ten pence piece looks like. At any rate you did an excellent video. Well detailed and well-thought-out and explained. Keep up the great videos! cheers from Canada!!!

[@rondail5675]

I really like the new Turtle Wax Products. But not the Hybrid Ceramic Wax(non black version). I completed my 2019 Honda Ridgeline. I first thoroughly cleaned the truck. I polished with 5" rotary, using blue foam pad, and using Turtle Wax Hybrid Ceramic Polish&Wax. This worked nicely for application, clean-off, and swirl removal. I waited a few days and applied the Turtle Wax Hybrid Ceramic Wax. This I didn't like! Apply and wiping off left light&dark streaking, uneven. I had to wipe down with a damp microfiber cloth and immediately with a dry microfiber. I have used the TW ICE Wax and Detailing on my Corvette. Works easily, and has the shine. I will not buy the TW Ceramic Wax or Detailer again!

[@SpeckyMcSporran]

I've heard a few people having issues with using the polish with the spray coating. I've used both together and separately and preferred the coating on unpolished paint. I'm not sure why this is the case as they are designed to work together.

[@rondail5675]

@@SpeckyMcSporran , thanks. I will try on my Vette without polishing.

[@ObsessiveCarDetailer]

Another very informative video Specky. I am very interested to see how this range works so will be looking for your follow up videos. TW is not a brand I would normally look at using so this is very interesting.

[@SpeckyMcSporran]

Cheers Martin 👊

[@clou1969]

I’ve tested this product and it’s Awsome. It’s can be layered with their ceramic spray coating.

[@SpeckyMcSporran]

I found the spray coating didn't perform as well over the polish as it did on a clean panel.

[@clou1969]

Specky McSporran strange they say they have been made to complete each other. I polish and spray one week later. I’ll check how it’s performing over time. If I’m not satisfied I’ll go back to Seal N Shine with a topper of ice spray wax. This is super durable after 6 months of snow, salts, slush my car was still protected.

[@mdik1366]

Can you combine Seal n Shine with Ice spray wax?

[@clou1969]

md ik yes ice spray as a topper yep. It will enhance the shine and gloss. Very good combo.

[@mdik1366]

@@clou1969 wow nice. do you know if i can use seal n shine as a topper with this ceramic polish wax?

[@markmoore6264]

Just found your channel Specky , great info regards the Turtlewax ceramic polish 😎

[@SpeckyMcSporran]

Thank you!

[@peemick]

Good vid as always, good info and your impressions of using and results in there. I feel you pain, I did hand polishes on car for 6 years before I started with DAs. What polisher were you using here, as well as what was your pad choice? Typically All-In-One(AIO) products as very dependant on pad choice, as to what cut and finish you do get from them. Also your technique on the polisher was more suited to a Forced Rotation DA (Flex 3401), as an enhancement rather than a true correction, but if your not bothered about perfecting the paint... 24hrs cure time before waxing though, probably not one I'd use in the real world due to the cure time, but the price is comparable to other polishes on the market and very cheap for a ceramic infused one. I;m aslo interested in how the entire system works, and what results it offers :) Keep up the good work

[@SpeckyMcSporran]

I don't usually rely on AIOs to correct paint, I'll use dedicated compounds and polishes for that. AIO is all about enhancement and this certainly does that. I was just using a basic DA from Argos with a soft polishing pad from SPTA. True, it's cheaper than many other ceramic polishes but the cure time may put people off. It has more protection than many other AIOs so might be a better choice for long term care of a car when combined with the ceramic spray coating.

[@billb2580]

Enjoy your videos merry Christmas happy detailing year

[@greymark420]

I still think Sonax Extreme is hard to beat, Specky. Also a lot cheaper and beads very well.

[@SpeckyMcSporran]

True, BSD is a beast of a product and the value can't really be beaten. However, the Turtle Wax Sealant Hydrophobic Wax is a real contender if you can get it for under £8.

[@greymark420]

@@SpeckyMcSporran I agree Specky. I have also used Turtle Wax Sealant, very good product at a good price. My point was aimed at this Ceramic Wax, far to expensive for no difference between Sonax and Turtle Wax Sealant.

[@paultaylor9652]

Lovely Jubbly, very scientific, all the best for Christmas Mr Specky.

[@SpeckyMcSporran]

Thanks Paul, you too!

[@OCDaddyZsolt]

Happy Holidays, Specky. Your channel is growing nicely and you deserve it very well. Nice review, as always. Hope I will be able to pass a 1000 subs as well and keep growing.

[@SpeckyMcSporran]

Thank you mate, your support is appreciated. Best of luck to you 🤞👊

[@RaldasDetails]

I will subscribe to OCDaddys channel to help him and get the 1,000 soon👍🏼👍🏼 great video sir!!👍🏼👍🏼

[@SpeckyMcSporran]

Thank you, I subscribed to his channel today 👍

[@RaldasDetails]

Thanks!!

[@PaulDoldenDetails]

Interesting one this Specky I’ve got the range waiting in the wings that’s a good size bottle I wonder how much it actually fills looks like a all in one 😎👌🏻

[@SpeckyMcSporran]

It's basically a one-step polish so it's a higher protection AIO.

[@GR888T]

What about the paint correction aspect? Did it have a visible difference in the reduction of swirls and light scratches?

[@SpeckyMcSporran]

Yes, but the wax in the polish has filling abilities so this wouldn't be recommended for correction.

[@barrybij8079]

Good vid. Looks easy to use. 1 question, how did it polish the paint swirls and marks ?

[@SpeckyMcSporran]

It removed oxidation well and definitely enhanced the paint but I didn't test the correction ability as I would prefer to use a dedicated compound and polish. It may be something I'll test in the future though.

[@Rk6505]

Specky,u really need to cut down on the amount of product you load onto the pad it should be spread as thin as possible, less is more as they say

[@SpeckyMcSporran]

Yeah, but if I make the mistake of overloading the product and it still works well and comes off easily then it's a very forgiving product. And if I can make that mistake then other can too. That's why I approach these reviews as a novice and not like a pro.

[@BrianW1612]

Agreed on this. 3 pea sized blobs is plenty. Not taking into account the depth of the product applied when you go with 4 'dime' sized blobs. Good video though and from what I seen although the cut isn't overly aggressive, this has a very long working time which coupled with the non diminishing abrasives allows you to get good cut with several passes, along with a good finish.

[@SpeckyMcSporran]

Thanks Brian. Yes, I used far too much but it also demonstrated its long working time and with a firmer pad it would likely cut a good amount.

[@stevenjones19-m8i]

Hi Specky,good review on this ceramic polish and wax,it seem runny does do you have to apply with something else to seal it or use as it is.

[@SpeckyMcSporran]

Thanks Steven. It is runny so make sure to use less than I did. It has lots of protection built in but I'd use it as a base layer and apply their Ceramic Spray Coating over the top. Two coats are apparently enough for 12 months of protection which is designed to bond to the polish layer. If you want to save money then I'm sure you could use their Sealant Hydrophobic Wax instead.

[@stangordon1046]

Do you know if the European Specs are identical to the American ones?

[@fpalenciafp]

Other than the most expensive bottle of soap it left a coat that I had to scrub after it was dry I wouldn’t recommend it but that’s just me

[@SpeckyMcSporran]

That's a shame, haven't had any issues with it myself 🤷🏻‍♂️

[@ll1122]

Thank you for sharing and amazing results 😇

[@SpeckyMcSporran]

You are so welcome!

[@ghostinthemachine76]

Good effort Specky 👍

[@SpeckyMcSporran]

Thank you 👊

[@Efstratiouz]

Hello and thanks for the vid, should I apply something else after this or is this enough protection for a few months? Also, do you know if it protects from UV?

[@SpeckyMcSporran]

I'm not sure about UV, the polish doesn't really "need" a topper but I think it would benefit from one.

[@richardpearson4248]

Another great video 🥳👍

[@SpeckyMcSporran]

Thank you! 👊

[@brentransenberg1580]

Looks like your "dime" sizes were about 2 to 3 times larger than other reviews have suggested. I would say 3 pea sized drops on that small of a section would have done you better

[@SpeckyMcSporran]

I definitely got the size wrong

[@pittwm]

That’s quarter size

[@themddream7474]

Can u coat an additional layer of turtle ceramic spray over the polish wax ?

[@SpeckyMcSporran]

Yes you can but be aware that many people have noticed that the water behaviour is not as good when the spray coating is applied over the polish.

[@themddream7474]

@@SpeckyMcSporran thank u sir..

[@guaranteedworstcardetailin6793]

Great job!

[@SpeckyMcSporran]

Thank you 👊

[@stuartwest1236]

Hi specky, great informative video m8, I'm on the look out for a polisher, can you tell me what one you were using?

[@SpeckyMcSporran]

It's a Challenge Extreme from Argos, cost me £60 two years ago and honestly it's a good polisher for beginners.

[@stuartwest1236]

@@SpeckyMcSporran cheers mate, does it take universal pads? , I've seen one in halfords that looks not too bad too.

[@SpeckyMcSporran]

I think it came with a 150mm backing plate meaning you have to use larger pads. I swapped my backing plate to a 125mm so I can use smaller pads. Hope that helps.

[@stuartwest1236]

@@SpeckyMcSporran cheers specky👍

[@DetailedbyDon]

Nice video, I will echo the others in saying that you used WAY too much. You had enough on the DA pad to do the whole hood (bonnet) two or three times over. I think a better measure of how much to use would be three or four dots big enough to cover your thumbnail if you have average sized hands, or flat dots of product about 1/2 inch or between about 1-1/2 to 2 cm across.

[@SpeckyMcSporran]

Yep, I did. It was actually hard to control as it's so runny so keep that in mind if you fancy trying it.

[@orriefrutkin1996]

Don M It sure looks like the dots of product on the pad were way bigger than a US dime (about 0.705 inches; 17.9mm) and pretty high. Could this have made a difference in applying, buffing, etc.? Some other testers made a point of saying that they used little, and got good results.

[@darneilsipalay4270]

got my TW ceramic polish..my question is how about when you need to go for another pass and you activated the wax by spraying water on it is it ok to do it again on same spot?

[@SpeckyMcSporran]

I would assume that you can, the polish contains abrasives that would essentially scrub the area you've already worked on so it would reset that area.

[@gozallypraditya268]

Is it safe for plastic, rubber, headlights and glass windows ? I'm using TW ice paste wax and it safe for glass windows..

[@SpeckyMcSporran]

As it's a polish I'd keep it away from plastic and rubber.

[@gozallypraditya268]

@@SpeckyMcSporran thanks for advice.

[@johnketuroskey6293]

good vid...but u did use about 7x too much product....dime size drops....which are smaller than a penny.....doesn't affect results much but less would have enhanced panel better. Not runny...just too much. enjoyed the hand vs da results.

[@SpeckyMcSporran]

Ah well 🤣

[@neilmcintyre8166]

Where can you buy turtle wax polish from. Cant find it

[@SpeckyMcSporran]

Halfords and Amazon

[@kinnonmcallister]

Dime is the same size as a 5p coin. Good luck with your business. Happy Holidays. 🎄🍺🍺🍺... Waay to much product buddy.

[@SpeckyMcSporran]

Ah well, it shows that even too much product is not going to negatively impact the use. Better if I make these mistakes before someone else does.

[@innocentbystander2673]

Superb video. I think a dime is like the aussie 5 cent.....yes, i just realised how un-helpful that was....lol. About 10mm. Right, back to the video.

[@abhinav13d]

Hello Bro I am from India Which turtle wax is best Turtle Ceramic Polish and wax or Turtle The Max Wax Graphene Infused ?

[@SpeckyMcSporran]

They are different products, one is a polish and one is a wax. I like them both.

[@abhinav13d]

@@SpeckyMcSporran which one do you suggest for more golss and for long last effect ?

[@SpeckyMcSporran]

The polish will improve gloss but might not have the same durability as the Graphene wax. I'd use both, polish to improve the looks and gloss then apply the wax on top.

[@tigertom53]

Was it supposed to be three pea sized amount would see more right.

[@SpeckyMcSporran]

If it said that then all would be fine 🤷🏻‍♂️

[@amatore6]

Dime-size much smaller. Those look like half dollars.

[@SpeckyMcSporran]

I'm in the UK.

[@christye6013]

Hi Craig, You have honed your craft this year, have been checking out your earlier reviews and you have come a long way, keep up the great work in 2020, Although you have done a complete and informative review this product is not for me. CSTSA1

[@SpeckyMcSporran]

Thanks Chris, if my review tells you enough to make an informed decision then I've done my job. I looked back at earlier videos and I was quite cringy but we all grow into our roles eventually 😁

[@darrenburchmore]

Srp is dated these days. More fillers thab cut. It lives by its reputation of old and the fact its available at halfords so easily. So many better products out there now. Detailed online have a ceramic polish which leaves the slickest finish ive tried in a long time.

[@SpeckyMcSporran]

SRP is by no means a bad product, it's made for the average Joe looking to keep their car clean and shiny. TW has aimed their new range and people like you and I, enthusiasts and semi-professionals who have more specific requirements. I haven't seen Detailed Online's ceramic polish yet, need to check it out 👍

[@JWL-UK]

@@SpeckyMcSporran I've been using SRP for several years as part of my regimen, following proper decontamination and clay. I like that it's easy to use either by hand or machine and the fact that it provides a good foundation for my preferred sealant, Fusso Coat. I've been watching the new TW line with interest but I don't know how this polish and SiO2 wax would react to Fusso (and vice-versa). Thoughts Speky? Have a great Christmas by the way!

[@SpeckyMcSporran]

I'm not sure if I would use Fusso over this as TW is a ceramic base and I would keep products within their families. SRP is a good base for most products but when it comes to ceramic products I'd prefer to use their own protective counterpart. This is just my personal opinion. As I've heard in comments, some people deliberately mix products from other brands and get great results. Have a great christmas mate!

[@peemick]

@@JWL-UK Fusso is designed to bond directly to the clear coat, so probably not suitable in this case. If I were going "off piste" and mixing products then I might try the TW, and put Gyeon Wet coat, or carpro reload over it on a test panel, but not on a real car. You can get great results mixing and matching, like Fusso and Sonax BSD as a topper.

[@JWL-UK]

@@peemick the only SiO2 I use is Bouncer's Done and Dusted Si Edition. My preferred combo remains as SRP to clean/exfoliate the paint then Fusso and BSD as a topper/drying aid. DDsi for extra gloss once a month! Not only this combo is economical but very long lasting too. I last applied SRP and Fusso Coat in September 2018 on my daily driver following a complete decon. I noticed that with careful maintenance wash, BSD as a topper and using an iron remover every 4-6 months, I could not justify doing a full detail again this year and pushed it to Spring - the continues to look great! That's a very good result in my book.

[@hakman239]

Iv seen waxes hiding scratches