Tutorial: Boeing 787 Cold & Dark Startup + FMC Tutorial! [2019] [QualityWings 787]

[@AviationPro]

Thanks for watching! :) 👉 If you enjoyed this content, please consider leaving a tip! It helps a lot! :) Tip via PayPal: bit.ly/3EA04xP 🏅 New! Become a member of the AviationPro channel & unlock extra perks! kzbin.info/door/eAbVr5nEFwtYnEY42dIuuAjoin 👉 Check out my Dash-8 Q400 Cold & Dark Startup Tutorial! kzbin.info/www/bejne/pom8Z4JpjM2rpq8

[@viggoprehn870]

AviationPro how do you contact tower?

[@amirmeyer6710]

Hi teacher.thanks for this video.im from iran.787 is my favorit.but you teach only cold and dark and taxi of this aircraft?i dont know decsent and landing.help me please

[@benjamingess983]

Thank u so much sir

[@ilankrt]

My neighbour is a B787 captain and because of Corona mostly at home. He asked me about a sim model. I am using X-Plane11.50 and there is no such a suitable model! Now I saw your tutorial and the QualityWings Boeing 787 on Prepare3D (that I son't own) and sent him the link. His reaction was "I'm really shocked - I never knew there was such software for amateurs !!! And I'm serious In my opinion, the resolution and reliability of the displays are really fantastic and represent the plane 1: 1". As I have simulation hardwire, he asked if I can set Windows, prepare3D and the QualityWings model on my iMac27 (High End), so he can train too. Long story because I would like to get some tips and hints for Prepare3D usage and aircraft model installation (need of additional plugins etc.) Thanks for help

[@ginobi0707]

16:20 A little bit surprised the speed brake is deployed, and worry if it will be recovered. 44:58 "Speedbrake, oh, it's on for some reason XDD" Good catch!!

[@AviationPro]

🤷🏼‍♂️

[@anamitradasgupta2608]

This is a very comprehensive and focused video that manages to communicate an enormous amount of relevant information in an easy, friendly and efficient manner. Thank you.

[@AviationPro]

Thanks!

[@vincentvanpaepeghem4844]

Great video. The 787, is my favorite Boeing

[@AviationPro]

Thanks!

[@marlitrax8058]

Me too, it is my favourite Aircraft of all aircrafts🤩

[@noel12397]

Me too, better than any other plane!

[@hunterayers6879]

Same

[@notsam1413]

I’m here before the MSFS rush to learn now

[@SimonNevens]

I'm used to flying the A320 series planes; so this tutorial was very much very needed when I wanted to start flying the 787 as well. Thank you :)

[@AviationPro]

You’re welcome!

[@astroace4624]

Airbus user, new to Boeing. This tutorial helped me a lottttttttt

[@joeyiamya]

I've been contemplating on getting into this aircraft and now I think I feel comfortable enough to get started. I'm a Boeing guy so this is pretty easy to learn, thanks for the tips and the guidance, extremely helpful.

[@AviationPro]

You're welcome!

[@RetiredFE]

Just purchased this jet. Your tutorial was outstanding. Thank you very much.

[@calegonrj]

Amazing video. You're a natural born teacher. Congrats and thanks! Will there be a sequence of this video?

[@AviationPro]

Thanks! Probably not, but I will probably feature the 787 in a VATSIM full flight some day :)

[@adeyoutube-qd3oi]

Thank you for your time putting this together. Very informative. now time for me to practice.

[@TrendingHeadlinesTV]

Best video I have ever seen! Great job! Thank you for taking the time to make this video

[@AviationPro]

Thank you! :)

[@micstatic]

very well done video. Do you have any more videos in this particular plane? Would love to see a Part 2 where you show us from takeoff to landing

[@noel12397]

Thanks! The 788 is my favourite plane and now I can buy it! I didn’t know how to start it

[@AviationPro]

You're welcome!

[@garysforth]

Thanks for the very detailed tutorial! You explained each step very well. If I wanted to save the panel state up to but not including Start R engine (and then left) could load it without going thru entire process on next flight? TIA.

[@leejames4757]

Very nice video! I fly the 787 in FSX-SE and found it really hard to use the EFB to begin with, especially getting an accurate value for the takeoff trim setting. But your video has exposed much more of what it available on this aircraft model, much of which does not seem to be very well documented ! Thank you. Like you, I add my approach and landing into the FMC, knowing I can always change it later if need be. It gives a more accurate distance/fuel burn calculation. My only criticism would be to maybe go a little slower! You speak quite quickly and move across the displays very quickly. Some viewers might find this a problem when trying to learn. Well done. Great piece of work!

[@AviationPro]

Thank you, and for your feedback! :)

[@peterlazuric5641]

Great video. I cannot believe how simple the overhead on the B787 is as compared to the B737NG or the B737MAX.

[@AviationPro]

Thank you!

[@christopherpinto4086]

Clearly explained, thank you so much. Your teaching is much easier to understand then other yt videos. Thanks a lot 🙏

[@AviationPro]

You’re welcome!

[@christopherpinto4086]

Can you please make a video of how to plan an approach and land 787 please. I prefer listening to you then other yt video. I can understand your teaching more easier.

[@richardaal3085]

How do you make the cockpit texture so clean and no blurry?

[@prasanthtadiparthy4896]

Dear Aviation Pro ;) You have such great Content Keep it up!

[@AviationPro]

Thank you! :)

[@mfckr0]

Does REX Skyforce gives you the sunlight illumination on panels? Actually it was moving with the aircraft when it was doing pushback! That was awesome. How can I set that up?

[@AviationPro]

No that's default in Prepar3D in you enable internal shadows ;)

[@darrenbraulio8373]

Thanks for your well guided tutorial ❤️

[@mohammadalshishani8264]

Nice video, so we maintenance crew rarely keep the battery on, we only use it if we need to start the APU when there are no external powers… also the 787 is very hungry for electrical power it has 2 generators on each engine with a total of four each capable of supplying 235VAC 250KVA

[@crispinugs3268]

This helped me a lot. Can you do a tutorial for the 777 landing??? Thanks!

[@AviationPro]

Check out some full flight videos with the 777 here on the channel, they should help!

[@lautamed3884]

Thank you very much for your explanation. How can I change the settings from lbs to kg ?

[@wong2230]

Thank you for this very good tutorial. may I ask if the VOR of your QW787 works properly ? how can I set VOR course in the FMC? Thank you.

[@bambangmuliyadi]

great, wonderfull. I will try this.

[@DanielD2724]

Another way to make the QW787 cold and dark automatically is to go to the QW787.cfg in the QW folder in P3D folder, and then remove the // from //panelstate=coldanddark.pnl If you know a thing or two about Java programming you would know that // is a comment to your code, so in other words the text behind the //does not have any meaning. But if you remove the // it will become a coded command to start the plane in a cold and dark state by default.

[@natewarecki]

Good video! But one thing I noticed was that you left the strobe light on the whole time. This isn’t your fault though because cold and dark panel does not turn off the strobe light, so if anyone else is reading this remember to turn it off when you set cold and dark. Great video though as always!

[@AviationPro]

Thanks! Yeah indeed, good catch. When I was editing I was wondering: is that switch really on? Never touched it! Hope they update the panel state sometime :)

[@anarahmadov5660]

nice video! thank you for the job you have done, dude!

[@manererdogan3276]

Great video. thanks for sharing. By the way what is that ''info'' key on display selected panel is used for?

[@lazo5784]

My cockpit looks incredibly dark compared to yours. Any tips on getting it lighter with the cockpit textures?

[@uischirock]

Hi, is possible to set a DIRECT in the FMC? I seem it doesn't work like other Boeing.

[@raimo5091]

Great video. How do you enter Mach speed into legs page in this aircraft? Also, releasing parking brakes is done via pressing the brake/rudder pedals, not the parking brake lever. It will release the parking brake and will keep aircraft from doing any sudden movements.

[@AviationPro]

Thanks! That should be possible through the VNAV CRZ page or simply selecting a MACH number in the speed window and hit the speed selector.

[@raimo5091]

@@AviationPro Yeah those modes work, but I was wondering if I could customize my vertical profile as such from the legs page. I myself have tried many combinations and have not been able to enter Mach speed as sector restriction. Really useful for oceanic crossing, especially when you plan on being away at the transit point. One would think they would include such a simple, but really useful FMS feature.

[@ef1464]

Hello with which application you calculate the fuel and those things would help me a lot for my flights

[@VBHB83]

Great plane it's my main P3D aircraft. Can't wait for the update out shortly.

[@DanielLanducciSpotting]

Amazing job and thank you! You helped me a lot!

[@AviationPro]

You're welcome! :)

[@MyMach4]

Hi, Very informative. Question thou! Is it still buggy? For instance I’ve read that sometimes one of the engines won’t start on pushback? VNAV issues? Also watching videos, I’ve noticed there is flaps retract call outs after take off. Which is neat, does it also do it on approach and landing phase of flight? Thanks Merry Christmas

[@and696]

I love this tutorial …Any chance to see the rest … such as onflight - approach and landing tutorials ??

[@AviationPro]

Thanks! I might take the 787 out on a flight some day

[@examplewastaken]

You can use the keyboard, you used to enter the ZFW into the EFB, to put in the exact fuel and passenger payloads, instead of using those very annoying sliders ;-)

[@hubermarcelo4273]

Hi. Amazing tutorial!! Thank you so much!! I have a question How can I know how much runway I have to spare in case of a rejected takeoff when I'm doing my performance calculations because it doesn't show there

[@guilhermeeloy6433]

Once you reach V1, you cant reject the take off anymore. The V1 Will be determined in your perf init

[@hubermarcelo4273]

@@guilhermeeloy6433 Yes but shouldn't I know how much runway to spare I have after reaching V1?

[@ghurghust]

What a great timing,actually just got this bird in my virtual hangar 😁

[@AviationPro]

Awesome! :)

[@danp1975]

Excellent video! Debating about getting this and the QW757. Keep up the great work.

[@AviationPro]

Thanks!

[@fadisalah2908]

Thank you for this video but i wont ask you about TCAS how can i use TCAS in 787 ? and i wont video for take off and aproch and desent and landing ?

[@moritzlentsch1157]

hello my question is does the qw 787 have a working weather radar and if so how do you activate it? hopefully someone else sees it. Thanks!

[@StallthenTurn]

Another excellent instructional video, thank you!

[@AviationPro]

You’re welcome!

[@arescyp]

great video 👍 where i can switch from lbs to kg? ...thank you

[@arescyp]

@RedBullRacing Thank you...figured out..thanks again

[@mohamedosama9312]

beatifulllllll video you are a really great man you taught me everything about aviation. can I ask how to do the route offset in the 787?

[@vrintsvideos7322]

Very nice tutorial!

[@AviationPro]

Thanks!

[@vrintsvideos7322]

@@AviationPro Next the Airbus maybe? ;-)

[@darrenmcgown1939]

I do my flightplanning via SimBreif and Navigraph, how would you enter the fuel weights from the Simbrief plan into the QW787? I have no plans on buying PFPX.

[@JazzarGK]

When you dispatch your sim brief flight, scroll down to see the exported format full of letters and numbers. A part way down should have all your fuel weights. I believe it says "Release" or "Block" fuel and thats how much you need for your flight

[@JazzarGK]

I just looked. I use JZU export format and its called "Planned Ramp"

[@genoservello8007]

You are amazing..I loved this video..I retired from American Airlines..6 years ago.and this is so fun for me...I was a Ramper...so I want to see the take off,and landing...is it out...????

[@AviationPro]

Thanks!

[@MrWoodberry]

Very helpful tutorial, alleen vroeg ik me af bij het invullen van de waardes van de fuel en de payload. Ik heb alleen een slider in de sim jij kan de waardes ook zelf invullen. Weet je waar ik dat zou kunnen instellen?

[@AviationPro]

Je moet gewoon op die waardes klikken, als het goed is kan je het dan invullen.

[@coreyc8936]

Great video...but I do have 1 question...with the ETOPS portion and following a NAT track..is it possible to simulate SLOP with a right deviation of 1 or 2nm? Or is there no way to offset your track with this aircraft?

[@AviationPro]

Thanks! It should be possible, never tried that myself in the QW787 though, but it would be weird if it's not there..

[@coreyc8936]

@@AviationPro Ya..no option in FMC for offset..the manual shows the dotted track for offset but doesn't show how to do it...so thats awesome lol

[@hpharold23]

Wow very informative. Thank you!

[@AviationPro]

Thanks for watching!

[@centralflorida1stamendment659]

where do you get the add on for the QUALITY-WINGS ULTIMATE 787?

[@otis670]

know that how you do a tutorialshowing just what you talking about sir keep up the good work

[@AviationPro]

Thanks!

[@migobuzz9767]

Nice video, helped me a lot, but how do you get the dispatcher to show you kg and not lbs, would be glad if you can help me fix this little problem. Thx :)

[@AviationPro]

You’re welcome! You have to put the entire aircraft in KGs. It’s done via the INFO page in the PFD, or you can adjust it in the livery manager

[@migobuzz9767]

AviationPro thank you very much. Found it and now it works, i would love to see from you a pfpx tutorial and how you plan your flights etc. Would be interesting. Keep up the good work

[@Brison1949]

Nicely explained,easy to follow

[@AviationPro]

Thanks! :)

[@assasincreed2480]

great video thank ! after 4yrs of having a break of flightsim I would like to move from fsx to p3dv4.And of course 787 is my fav aircraft. just wondering if asn weather prog would work? thanks for any replies

[@triiky6195]

Hello dude, how did you get this TUG for GSX? I don't have it in p3dv5

[@saudiavgeek152]

How did you set your fuel calculating unit as KGS? Although I set that in the Dispatcher app, it’s still LBS.

[@researchcapt]

Very helpful, even for a MSFS sim pilot. Subscribed :)

[@NaviSim101]

Nice video! Thanks. Are you returning to flightsim at any point?

[@AviationPro]

Thanks! I do still flightsim every now and then

[@theaviator8408]

Never knew a jet of this size is soo easy to set up

[@DuSlothster]

My good man please PLEASE do FSLabs A319/A320X. There is no good tutorial on them for Cold and Dark imo.

[@mauro6986]

Following your videos I got enthusiast to the virtual flight. I would like advice if to buy FSX or Prepared3D. Tanks

[@AviationPro]

Go for Prepar3D if you are choosing between those two, it's a lot more optimized than FSX and will be in the future :)

[@mauro6986]

@@AviationPro thanks for your advice

[@topsecret4791]

INCREDIBLE...thank you!!

[@ericchu1197]

I am a beginner of this simulator, please teach how to you switch the cam smoothly, I need to click me right buttom of my mouse everytime and its annoying

[@kamilmar7699]

Hello, can you tell me, how i can pushback my qw787 like i dont have gsx and different program to pushback?

[@thetruthisoutthereofficial]

nice video, how do you change pounds to kg on the 787?

[@denisveit6228]

Is there something like a fuel planner? I mean something like the one for the Aerosoft Airbus X Extended. 😅

[@MatiasPovedaSanchez-gh3zm]

Yes! The Quality Wings Dispatcher. Check that in your installed programs

[@denisveit6228]

@@MatiasPovedaSanchez-gh3zm Thanks! And is it also possible that I set my payload and it calculates the fuel for a specific route with that payload?

[@MatiasPovedaSanchez-gh3zm]

@@denisveit6228 Of Course. You will be able to do that all in the same program!

[@alessiotolu6214]

Great video!! How i can set the weight in KG in the 787 ? All my weight in the cockpit is in LBS . Thanks

[@AviationPro]

Thanks! You can do that in the livery manager actually.

[@alessiotolu6214]

@@AviationPro yes i do this... but its ever like i say you

[@cutliss]

@@alessiotolu6214 did you find out how to change it?

[@yont24]

What an awesome video. Thx😁

[@AviationPro]

Thanks for watching!

[@henrivanbemmel]

May I suggest you enable the shadows. The plane looks like it floating or something.

[@AviationPro]

They are enabled actually, however they might not always appear in the video due to the camera angle.

[@golfecho2972]

How do I change the bright of the PFD and CDU screen?

[@prajwal_747]

Can you please make a start up tutorial on airbus a330neo??

[@aaronantonopoulos989]

how come when export a flight plane with simbrie \f and savy it in the qualitwings folder, i hit route request and nothing shows up. plz help

[@nicuje8771]

Hi...have a question ... when I take off with 787 qualitywings ... without a flight plan the engines go to a standstill minimum speed and the plane stalls. I don't understand why happening this?? Is normal.? Don't want flight plan only...take off.

[@Test-Pilot1194]

Do we know of a way to contact MagKnight regarding this aircraft? I have it all up and running fine. However, I did only buy this particular one, because of a specific livery was available for it. Just as soon as I went to look after installation the livery has been removed 😞😞 (I know this is the quality wings model) but same idea.

[@urbanman1516]

Wonderful video!

[@AviationPro]

Thanks!

[@JCNF2]

How you achieve the reflecion in the displays ? thanks

[@AviationPro]

Not sure, but somewhere on the forum there are instructions to enable high quality displays

[@chinook9857]

Great video. Would you recommend the 787? I have been thinking about getting it

[@m4nxsim259]

Why do u want recommendations? If u want it just get it as if he will say no i dont recommend it...

[@AviationPro]

It's pretty nice, but don't expect it to be PMDG quality.

[@m4nxsim259]

Yes dont compare it to pmdg because it is better than pmdg

[@jonaaviation]

Nice video man!

[@AviationPro]

Thanks!

[@faizan2000ful]

Thanks for this! Also, can you tell which software you used for flight planning in this video? And also the camera software

[@AviationPro]

You're welcome! PFPX and Chaseplane

[@faizan2000ful]

@@AviationPro thanks a lot :)

[@thomastv8997]

Hallo at my Sim dont open the Qualitywings Panel can you say me Why?

[@murdock935]

Hello, I liked your video and it's well explained. Would you like some help, how do I convert to Qualitywings 787 pounds to kilograms? thank you.

[@AviationPro]

You can do that in the livery manager or via the multi function display

[@cieloaltoa3405]

Good video ! What version is this P3D and how much for this version ?

[@schweizerd6303]

wow the IRS align is only off and on, in the 747 there were a few more selections

[@fabianpalomo9270]

How can I change the settings from lbs to kg ?

[@rajeshdeshpande484]

Very Nice Thanks

[@Test-Pilot1194]

Loved it !!!

[@AviationPro]

😃

[@Test-Pilot1194]

AviationPro I really did, it was greatly accurate, and not only that, it’s shows me what to expect from a future 787. I have one at the mo in x-plane 11, but no pop out windows! I’m about to add a second display for the PFD/MFD and a 3rd display for the centre console. This won’t work with my 787 😢. But just getting one up and running WITH FMC! great video dude. 👌🏻👌🏻

[@SavageBambi]

how did you set the efb to kgs? i checked it on the qw dispatcher but hasnt changed in the efb

[@piersaustinfoss]

@AviationPro in my 787 the text on the mcp is a bit pixelated unless I zoom in, is this the same with you and if you know, how do I fix it

[@gaivy9159]

When you order the Qualitywing 787 do you get the whole package? Meaning the 787-8 and the 787-9 or do you just get one of them?

[@AviationPro]

Both, 787-10 is coming soon as well, I believe it will be a free update but I'm not entirely sure :)

[@atakancalik8306]

is this basic msf2020? amazing vid btw

[@tomstravels520]

No as it was uploaded 4 years ago

[@SonofthewindsInc]

Would you recommend a 75 Inch Oled as display with all these sims? Just waiting for Flight sim 2020 before I buy one with a high spec pc

[@captainelliot8767]

Boxset 75 inch is fucking huge my guy

[@SonofthewindsInc]

@@captainelliot8767 I know.. as real as it gets

[@captainelliot8767]

Boxset but, you gotta be sitting like at least 150 inches away

[@kellysperez8567]

Just excellent

[@bobmunday2762]

Hi AP, I run fsx and have QW 787 but don't know how to push back. I've looked at Atc menu but it does'nt give you the option, maybe you could give me some help with it, I've tried "shift p" but does'nt seem to work. Thanks. Also is it possible to get the RR engines with the liveries, l only have one 787 -8 showing in the fsx menu and when I put a livery on a 787-8 I get the GE engines on it once again Thankyou , Bob

[@AviationPro]

I am using GSX for pushback :) Shift+p should always work though, you might want to check your keybinds to see if it is set up properly

[@bobmunday2762]

AviationPro AP, Thankyou for your reply, I will have a look and see. Thankyou again, Bob

[@claudetabouret590]

Top Tutoriel tanks