TV Wall Mount Bracket Instructions - Mounting Dreams MD2617-03 Swivel & Tilt - Product Review

In this review, I test out the new TV Wall mount from Mounting Dreams. They had supplied it to do a review, and the video shows the installation procedures and my verdict on it. It is a very easy install, and the TV bracket behaved just as expected. Perfect score from me!
UK Amazon Affiliate Link: amzn.to/2UZEKxa
US Amazon Affiliate Link: amzn.to/2HwcVcM
Type: Swivel & Tilt
Compatible TV Size: 42''-70''(106-177cm)
Weight Capacity: 45.5kg
VESA Size: 200x100mm, 200x200mm, 300x200mm, 200x300mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x400mm
Swivel Range: (depending on the TV size) Max. 45 ° (left or right)
Tilt Angle: +5° / -15°
Levelling: +/-4°
Distance from wall: 64mm - 442mm
Tags:
Mounting Dream How to TV Wall Mount Bracket Swivel and Tilt for Most 42-70 inch Flat & Curved Screen TVs up to VESA 600x400mm and 45.5 KG, Ultra Strong Dual Arms Full Motion TV Bracket MD2617-03

[@SujMenon]

Product links (Amazon Affiliate link): UK Amazon Affiliate Link: amzn.to/2UZEKxa US Amazon Affiliate Link: amzn.to/2HwcVcM

Hello my friend Suj, You have mounted the TV bracket on the wall perfectly. It looks like a very easy setup with a little care. The setup sheet also contains useful information. (the dust collector was nice too) I think it's a nice product. Installation and testing is successful. congratulations. See you. big greetings. a warm hug. stay healthy and safe.

[@SujMenon]

thanks buddy, yes it was an easy install. only area to concentrate is while drilling the 6 holes properly. 😅👍

@@SujMenon You drilled those holes properly too. The template always does a good job. See you. hello mate.

[@HewAndAwe]

Thats a good idea mate, the small pilot holes, I've never done that nor thought of it for walls! I saw someone try using Alexa to turn tools on in the workshop, trouble is Alexa couldnt hear him say turn off said tool 😂

[@SujMenon]

Thanks, ben, yes the pilot holes saves the SDS drill from walking all around the wall. And yes, I thought about using Alexa dot at the dust collector, but even before I reached the garage door, I knew it was a bad idea, as you just can't shout over the machine. haha 😅😜

[@FixitFingers]

Great looking product mate. Geez you're getting a few nice little sponsor deals of late 👍

[@SujMenon]

Haha James, yes 😀. But I wouldn't call them sponsorship per se, as I am not paid anything by them to make these review videos. It could be because I have done a lot of product reviews in the past (around 16 so far), that they feel like I could/would do it. Thanks for watching mate 👍 😁

[@russellmakar579]

Good review, thanks for the information.

[@SujMenon]

Thanks 👍😁

[@PointMicrosoft]

Looks good, I might get the canada version.. I hope it supports 300 x 200 vesa. Great video, happy holidays.

[@SujMenon]

Cheers, yes it supports 300x200. Happy holidays to you too👍😁

[@azdude1890]

Just wanted to send you a quick thank you for your straightforward how to video. I ordered the same TV mount from Amazon as “used“ although it had never been mounted. It was not in the original packaging and did not have the instructions. Your video gave me the information I needed to get the job done. Thank you very much.

[@SujMenon]

That's great! Hope the install goes well 👍😁

[@ChrisFranklyn]

I have to say that hanging a TV on the wall terrifies me :) But enough people do it and there aren't TVs crashing around us everywhere.

[@SujMenon]

haha Chris, yes it is scary stuff (especially when you are diy'ing it). The key thing in this is the holes being drilled.. not only they have to be level from the floor, but also the 6 holes need to align and match the recess on the mounting plate as well. Have done a few for friends, so now know what to expect. 😂

[@Lee-mv8mh]

How can I determine which hole I should Usero attach the bracket to the TV?

[@SujMenon]

Is this about which hole to use on the bracket at around 2:13 region? Any of them will be fine as long as it's the same ones on either side. I biased my positions to the lower side, as the weight of the tv will be higher there.

[@nuvola-b]

Hi, I have ordered this for 75x90j So we need 10" drill bit but 6 anchor and 6 bolts are included right? For concrete wall? Not wood? Thank you for the video btw.

[@SujMenon]

Yes, I think it comes with its own screws and bolts and rawplugs. It's been a while since I installed it, but I think I used a 10mm drill bit on my SDS drill. And yes, mine is a brick wall, so a concrete wall should be fine.

[@nuvola-b]

I bought the same for my 75". Its on the way. But i have a stone wall decor behind my tv. Can i mount it through that stone and to real wall ofc. Is it safe? Or should i break and take off stone pieces around mount?

[@SujMenon]

Without seeing the wall, it would be difficult to give a proper opinion. But, if the stone wall effect has uneven surface, then I would recommend to cut that patch out where the mount attaches to the wall. The mount has to be flat on the wall to take the load properly. I know its not the recommendation you might have hoped for 😁. I did the same with my wood effect paneling.

[@nuvola-b]

Thank you for reply :) so do you have any idea how can i easily detach it from wall?

[@SujMenon]

Depends on how it was fixed. I think a safe bet is to start cutting it using a multitool/oscillator, with a carbide tip. That will give you good control, while cutting through it. Make sure to use a making tape, and draw the outline on it before that

[@nuvola-b]

@@SujMenon they look like just glued to the wall

[@leonci5639]

So it surely would hold my 65" 25kg Sony X900H?

[@SujMenon]

Yes, the spec says it's fine.. Compatible TV Size: 42''-70''(106-177cm) Weight Capacity: 45.5kg

[@leonci5639]

@@SujMenon Thanks buddy 😄 Going to buy it

[@ericedwards7180]

Are the studs mandatory? Can I use the 100lb cobra anchors instead?

[@SujMenon]

They always recommend going through studs. The problem is not with the anchors, but with the dry wall. That will probably not hold the weight of the TV