'TWAS THE NIGHT BEFORE CHRISTMAS and THIS FREIGHTLINER IS "NOT STIRRING"

  Рет қаралды 1,008

BIG BELLY BUMBLES

BIG BELLY BUMBLES

Күн бұрын

Пікірлер: 32
@keepontruckinoutlawlife1248
@keepontruckinoutlawlife1248 3 күн бұрын
Unfortunately I know that noise it sounds like a lot more money... Steven knows that noise to.. keep the faith this to shall pass. God bless
@bigbellyrebuilds2778
@bigbellyrebuilds2778 3 күн бұрын
"This too shall pass." Amen. Thank you. Appreciate the encouragement. WE NEED IT FOR SURE!! This is very discouraging. The whole thing about the truck is SO OVERWHELMING! Thank you for your faithfulness to our channel! Happy New Year! Ruthie and Steven 12/29/24
@keepontruckinoutlawlife1248
@keepontruckinoutlawlife1248 3 күн бұрын
@@bigbellyrebuilds2778 we both know it takes money to make money. Trucking is hard but it is very profitable if done the right way.. I have seen this industry go to absolute sh.t in a hand bag it won't be to much longer and I'm going to hang it up myself holding on for dear life now... to many foreigners trucking that can't even speak English it's insane!!!
@bigbellyrebuilds2778
@bigbellyrebuilds2778 3 күн бұрын
@@keepontruckinoutlawlife1248 Indeed. Yes, you are absolutely right. Hope you can hang on until you are ready to retire. Have a good evening, and thanks for writing back. Ruthie 12/29/24
@patrickbooth2329
@patrickbooth2329 2 күн бұрын
@@bigbellyrebuilds2778 Amen . you guys will be fine .
@bigbellyrebuilds2778
@bigbellyrebuilds2778 2 күн бұрын
@@patrickbooth2329 Thank you, Mr. Patrick. Appreciate it. Have a great day! Ruthie 12/30/24
@amos4457
@amos4457 3 күн бұрын
I think you two are doing a good job. I think the needles in the shaft between the 2 diffs could be making some noise push up on each end of shaft an see if there is movement in the ujoints. That shaft is called a interaxle shaft. I think also when u spin it the front diff (rockwell RD23-160)makes noise I think that's the I.a.d ( interaxle differential) I think it mite be ok, I'd pull the drain plug an see if metal collects in your hands when u unscrew it if no metal u are good to go.
@bigbellyrebuilds2778
@bigbellyrebuilds2778 2 күн бұрын
Steven agrees 100 percent!! Your information is GOLDEN. YOU ARE RIGHT ON TARGET!! THANK YOU SO MUCH!!! APPRECIATE YOU WATCHING AND COMMENTING. Happy New Year! Ruthie B Howard 12.30.24
@patrickbooth2329
@patrickbooth2329 2 күн бұрын
Not quit a roll over but getting there .
@bigbellyrebuilds2778
@bigbellyrebuilds2778 2 күн бұрын
Yes. Steven had one "roll over" coming off Cabbage many years ago. This is a very bad thing! Thanks for watching and commenting. Ruthie B Howard 12.30.24. HAPPY NEW YEAR.
@marvinasher-m4h
@marvinasher-m4h 3 күн бұрын
Watching From London Ky
@bigbellyrebuilds2778
@bigbellyrebuilds2778 3 күн бұрын
Thank you, Mr. MARVIN. APPRECIATE IT. Happy New Year! Ruthie 12 29.24
@patrickbooth2329
@patrickbooth2329 2 күн бұрын
Have you ever seen the bearing rubbed into the banjo spindle . Tell ruth the pumpkin has a banjo . AKA Banjo housing
@bigbellyrebuilds2778
@bigbellyrebuilds2778 2 күн бұрын
Yes! Steven had one catch one FIRE on his 1996 Peterbilt many years ago. Thanks for ALL YOUR COMMENTS on this video! Wow! Thank you! Happy New Year! Ruthie B Howard 12.30.24
@patrickbooth2329
@patrickbooth2329 2 күн бұрын
Hows the S cam bushings . you can see lots of brake shoe there must be excessive brake drum wear . you can see how far the S cam is adjusted and you still got the drum off .
@bigbellyrebuilds2778
@bigbellyrebuilds2778 2 күн бұрын
Yes, Steven agrees. Our money is getting very low at this point. We don't know if we can afford to replace the S Cams...hope we don't have to. All the repairs are adding up fast! Happy New Year. Ruthie B Howard 12.30.24
@coloradojeeperjenny9661
@coloradojeeperjenny9661 3 күн бұрын
My classic is having the same issues. Needs driveline, Rearend, Shocks, and so on. Not making enough money to get it fixed now plus my wife just got over cancer so i had to take time off. Sometimes life just sucks
@bigbellyrebuilds2778
@bigbellyrebuilds2778 3 күн бұрын
Very sorry to hear all this. Yes, life can certainly be CRUEL. We know all about that! For sure! However, we are very THANKFUL to hear that YOUR WIFE HAS RECOVERED from cancer. Praise the Lord for her recovery! Thank you for sharing that positive information. We can only do all these repairs because we BORROWED THE MONEY ON TOP OF ALL THE OTHER DEBT THAT WE HAVE ALREADY. (We are not made of money.) But we are very thankful that you are going into the new year with your wife having recovered. Hopefully, you can get back out on the road now and start making some money. We wish you well and hope the best for you. WE PUT OUR TRUST IN JESUS CHRIST. WE WOULD NOT HAVE MUCH HOPE IN THIS WORLD WITHOUT HIM. Have a blessed evening and a Happy New Year! Thanks for watching the video and commenting. Ruthie B. and Steven Howard 12/29/24
@mikealdrich7279
@mikealdrich7279 3 күн бұрын
The slots in those aluminum rims are shaped like the freightliner logo. Those are freightliner rims.
@bigbellyrebuilds2778
@bigbellyrebuilds2778 3 күн бұрын
Yep, you may be correct I wasn't so positive on the slots, Thanks...
@mikealdrich7279
@mikealdrich7279 3 күн бұрын
@ I never realized those were the shape of the old freightliner logo from when they were White Freightliner until I saw it on another KZbin channel. Now I can’t unsee it!
@bigbellyrebuilds2778
@bigbellyrebuilds2778 3 күн бұрын
@@mikealdrich7279 LOL! Thanks so much for making me smile! Have a great evening and a very HAPPY NEW YEAR 2025! Thanks for watching and commenting on the video. Ruthie B. Howard 12/29/24
@patrickbooth2329
@patrickbooth2329 2 күн бұрын
I wish there was more hours in the day to watch your videos . I wanna see the wheel bearings . im want to see why the wheel bearings where leaking .
@bigbellyrebuilds2778
@bigbellyrebuilds2778 2 күн бұрын
Steven just purchased NEW WHEEL BEARINGS without even fully examining the old ones. He has the bearings and the seals already. We have not made these videos yet. Please stay tuned.... AND THANK YOU FOR ALL YOUR COMMENTS on this ONE VIDEO. Thank you for your kind words about our videos. So glad that you are enjoying them. Happy New year! Ruthie B Howard 12.30.24
@johnnyholland8765
@johnnyholland8765 3 күн бұрын
Dude I understand your frustration at all the repairs but you knew that going in. That truck ain't new. No need to gripe about it now. If you are so pissed at your situation then fix the truck and sell it because you clearly don't need a truck if you are going to freak out every time you have to spend money. Owning and driving a truck especially a used one means spending money.
@bigbellyrebuilds2778
@bigbellyrebuilds2778 3 күн бұрын
This is my FIFTH SEMI TRUCK AS AN OWNER-OPERATOR IN THE LAST 20 YEARS. YOU ARE "SINGING TO THE CHOIR." Besides, I would argue any day against your claim that I was "freaking out." Have a nice day. SCH 12/29/24
@rce8540
@rce8540 3 күн бұрын
That looks like bendix air dryer. There usually around 200 for a rebuilt one. But maybe it’s another make. Bendix is usually light blue.
@bigbellyrebuilds2778
@bigbellyrebuilds2778 3 күн бұрын
Yea I was surprised as this whole deal is full of surprises.
@rce8540
@rce8540 3 күн бұрын
It looks to me like the gentleman that owned this truck never ever crawled under it. Shouldn’t have even owned a truck. He should be ashamed of himself. BEST of luck. He sold you a lemon. Feel bad for you folks.
@bigbellyrebuilds2778
@bigbellyrebuilds2778 3 күн бұрын
Yes, we are LEFT WITH A LOT OF WORK AND WE ARE OUT OF A LOT OF MONEY! Thanks, Mr. RCE. Ruthie 12/29/24
@donnussel6263
@donnussel6263 2 күн бұрын
i agree
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
Best Of Customer States 2024 So Far
31:31
Mechanical Nightmare
Рет қаралды 1 МЛН
I bought a DEAD Caterpillar D8 | It's a fighter!!
59:23
Scrappy Industries
Рет қаралды 195 М.
DUMP TRUCK DISASTER!!!  DOWN IN THE DUMPS!!!
55:49
Ron Pratt
Рет қаралды 70 М.
Our Scania Undergoes DOT Inspection in the USA
40:24
Bruce Wilson
Рет қаралды 205 М.
On The Hunt Ep.48 Kenworth Cabover Auction
44:06
TwinStick Garage
Рет қаралды 64 М.
Torsion Bar Lift Key Installation for 4X4 Trucks EXPLAINED!
1:07:59
Rainman Ray's Repairs
Рет қаралды 74 М.
Life Of A Mechanic (My Story, Why I Quit)
15:09
BobbyBeltz
Рет қаралды 123 М.
Yacht Engine Destruction!  Detroit Diesel  8v92TI Lots of Broken Parts
32:14