A simple step by step guide on how to fit this pipe Simple tools include 7mm +12mm sockets flat head screwdriver torch Knife
Пікірлер: 91
@precool2 жыл бұрын
Love your channel my friend. I’m going to do this for the same reasons you did. Simplification, cleaner decluttered engine bay and flow efficiency. The winding noise is beautiful but I don’t need it! 😆 Keeping it clean and simple. Thank you again mate!
@tweedbean2 жыл бұрын
Thanks for watching
@precool Жыл бұрын
@@tweedbean Always.
@terrydickinson50072 жыл бұрын
Yet again another epic vid.ive used your clips on nearly every bit I've done on mine.keep it up mate
@tweedbean2 жыл бұрын
Thanks for watching and the great feedback.
@myousic9342 жыл бұрын
Straight up, where tf is the end result at man
@user-nh8tc9po2l Жыл бұрын
hose without soundgenerator from BMW as oem hoes aviable too, just checked from R56 LCI
@tweedbean Жыл бұрын
Not seen them before
@chrisowens66833 жыл бұрын
Came to your videos to see the install on the pipe, then noticed you had the AEM intake, which I am also thinking about getting. How do you like it? Any issues at all? And thanks for making the videos!
@tweedbean3 жыл бұрын
Hi thanks for watching, glad it was useful. As for the AEM intake its expensive but does a great job and love how it turns the scoop into something functional. Only issues people see is fitting the heat shield above the turbo that comes with the aem, this traps a lot of heat and can lead to melting the front corner of the rocker cover, note this also can happen without the heatshield with the car in stock form, this just seems to speed up the process so many people dont fit the AEM heatshield and instead fit a proper turbo jacket.
@chrisowens66833 жыл бұрын
@@tweedbean Thanks for getting back so quick. Forge turbo blanket already fitted! I don't know why, it just seems like the AEM and the DDM Works "Ram Air" intakes would act as a funnel and dump water into the airbox on a rainy day. Awesome to hear you have no issues.
@tweedbean3 жыл бұрын
If you live in a particularly wet climate you can also purchase from AEM a waterproof cover for the filter which is also breathable, something like this maybe, www.aemintakes.com/1-4007-air-filter-wrap
@precool Жыл бұрын
So at 5:55 you pull the wretched noise maker unit. Would the car be drivable at that point? (until I had time to install the pipe) Or would it just be sucking up air driving like 💩 and throwing codes? I just did some nosing around in there and the hanging loop broke, so it was saggy plus the firewall piece was loose because of a broken PLASTIC clip. Thanks mate. This is a solid video as always!
@tweedbean Жыл бұрын
I honestly dont know the answer to this and wouldn’t want to give you bad advice
@precool Жыл бұрын
@@tweedbean Thanks! 👊🏻
@precool Жыл бұрын
@@tweedbean The answer is no. I capped it off and the car runs great. My silicone pipe is on the way. Love the real car sounds, no more kazoo. Thanks for the step by steps. I'm getting much more confident working under the hood.
@mr.gellibert3605 ай бұрын
@@precool How did you cap it off? I am looking to do the same thing to my R57
@manuelmarrero56574 жыл бұрын
Hello, Great video... Where do you buy that Silicone hose? Let me know...!!! Thanks
@tweedbean4 жыл бұрын
Hi thanks for watching, I got it from ebay: www.ebay.co.uk/itm/Mini-Cooper-S-R56-R60-Noise-Generator-Delete-Silicone-Hose-Pipe-Blue-Red/153442202842?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
@philcampbell23175 жыл бұрын
Are you doing a intercooler resonator delete as well?
@tweedbean5 жыл бұрын
Thanks that video is already live, see here Mini 2nd Gen How to fit an Intercooler Pipe Resonator Delete R56 R55 Cooper S JCW N14 kzbin.info/www/bejne/sJ6zgnpuaL1kjLc
@Neptune83 жыл бұрын
Is this similar for the N18 ? I assume it is after I took a look at my engine bay
@tweedbean3 жыл бұрын
Sorry I’ve never worked on an n18 so wouldn’t want to give you a wrong answer
@eduardopadilla85323 жыл бұрын
The n18 doesnt have the noise maker
@neilgoldring95433 жыл бұрын
@@eduardopadilla8532 yes it does
@mickey23ram2 жыл бұрын
just came across your channel great stuff any website you recommend buying parts from?
@tweedbean2 жыл бұрын
Thanks I use Orranje performance a lot
@JodBronson4 жыл бұрын
5 Minutes EASY FIX and cost $0.00 ----- No need to do all that, just plug the " Splitter Hole " up and you are all set !!!
@tweedbean4 жыл бұрын
Both valid options, some people prefer DIY, some people like an off the shelf solution, plus who doesn’t like new silicone hoses ;)
@JodBronson3 жыл бұрын
@@tweedbean - Yea, you are right !!! I leave everything alone, but I live in a 9+ bedroom house !!! LMFAO
@gbear82077 ай бұрын
What do you use to plug the hole?
@JodBronson7 ай бұрын
@@gbear8207 - Pause @ 5:31 where he points the screwdriver. Put a CAP on it and you are all set. I use a cap from a plastic bottle (Drink) and it fits over nicely. To make sure it doesn't pop out, I use Electrical Tape and stretch it as I tape. Putting an extra round is a must !!! *NOTE:* Another way and I have done it many times. Most plastic bottles CAN be used as shrink tubes. Find one that fits right over it and then get a heat gun and carefully heat it. It will shrink like a shrink tube.
@hy5d33 жыл бұрын
Can you block the hole the noise tube went in so no engine fumes are coming in?
@tweedbean3 жыл бұрын
Yes you can apparently use the cigarette lighter cap for the hole or any random rubber bung if you feel so way inclined
@hy5d33 жыл бұрын
@@tweedbean how would a rubber band or lighter cap work, its a rectangle hole. Where the red tape is on the body that the noise hose clips in.
@tweedbean3 жыл бұрын
I’m must be thing BRZ/gt86 then
@hy5d33 жыл бұрын
@@tweedbean this is a mini cooper. You can see it around the 5:20 mark in your video
@tweedbean3 жыл бұрын
Agreed I haven’t seen anyone block this, I didn’t have an issue of any smells etc coming in. There isn’t anything off the shelf, you would have to make something yourself to block it if required
@CathodeRayNipplez4 жыл бұрын
Excuse my ignorance but why not simply block/plug the 'Noise pipe' and leave it in place?
@tweedbean4 жыл бұрын
You could but why leave pipes in there that you don’t require any more. All they are at that point is additional clutter in the engine bay and extra weight(yes I know it’s not significant)
@CathodeRayNipplez4 жыл бұрын
@@tweedbean Can it be blocked at the cabin outlet end? I simply cannot be assed faffing around in the engine bay with my big ape hands..
@mlarsen773 жыл бұрын
Big ape hands.... funny. I dont have big hands, but these little cars don't leave much room for any hands to begin with. The more empty volume you remove from the intake, the more stable air pressure (or negative pressure) will be. I think more air space would be more area to cause delay with throttle response and air draw due to more surface area drawn in by vacuum. Just my guess. :)
@CathodeRayNipplez3 жыл бұрын
@@mlarsen77 Ahhh.. Without giving myself a brain strain I like your theory..
@mlarsen773 жыл бұрын
@@CathodeRayNipplez I'm with you. If it has notable positive impact, I'm game. If it does nothing but remove sound from cabin..... it will continue sending sound to the cabin. :)
@dodge11373 жыл бұрын
Did u cover the hole left by the removal of the noise injector at the firewall? Or is it not a true hole thru the firewall in to the cab?
@tweedbean3 жыл бұрын
Currently there isnt an off the shelf solution for blocking the hole into the cab
@bhavs8577 ай бұрын
Anything changed on this in the past 2 years? I can sometimes smell engine smells in the cabin which I think comes through this@@tweedbean
@tweedbean7 ай бұрын
@@bhavs857 not seen anything but I bet it wouldnt be hard to tape up or throw together something to block it
@bhavs8577 ай бұрын
@@tweedbean thanks... I'm not good with ideas for this so wanted to know if anyone's actually made something 😂
@computek91413 жыл бұрын
Where did you buy the hose?
@tweedbean3 жыл бұрын
eBay
@AhmedAli-vy6up4 жыл бұрын
Coop video So I'm thinking to delete mine But I want to know what's the diffrent ?
@AhmedAli-vy6up4 жыл бұрын
COOL
@tweedbean4 жыл бұрын
@@AhmedAli-vy6up The new hose connects to the throttle body at the rear of the engine bay and is specifically designed to fit the Mini Cooper 1.6 Turbo. The standard hose can be restrictive and more so with earlier models that contained a noise generator. Installed on the cold side, this free flowing hose improves turbo response throughout the rev range. The re-enforced silicone structure will withstand greater temperatures and pressures than the original hose and is ideal for tuned engines.
@daleblake89225 жыл бұрын
Did it make much less noise?
@tweedbean5 жыл бұрын
Nothing noticeable noise wise
@thesilent19754 жыл бұрын
@@tweedbean Hi, so what is the main purpose for this modification, please?
@tweedbean4 жыл бұрын
@@thesilent1975 ). The standard hose can be restrictive and more so with earlier models that contained a noise generator. Installed on the cold side, this free flowing hose improves turbo response throughout the rev range. The re-enforced silicone structure will withstand greater temperatures and pressures than the original hose and is ideal for tuned engines.
@diegoortiz15183 жыл бұрын
What does this pipe do?
@tweedbean3 жыл бұрын
Thanks for watching it deletes the noise maker which is a pipe that basically pumps engine sound into the cabin.
@rickbfreaky22 жыл бұрын
@@tweedbean so is there any benefits of not having sound pumped into the cabin?
@mlarsen773 жыл бұрын
Your video title pic says "is it worth it?" Well, is it? :)
@tweedbean3 жыл бұрын
For me yes, I like a bit of colour on the engine bay, you may not feel a noticeable difference but it all adds up.
@bartzielinski45992 жыл бұрын
@@tweedbean and how about the actual noise? Did you notice any difference inside the car?
@tweedbean2 жыл бұрын
Honestly there was some difference, was it noticeable, probably not
@TylerGoelz2134 жыл бұрын
Did you just leave the port into the cabin open or plug it up somehow?
@tweedbean4 жыл бұрын
I left it open, it may be a good idea to block it up, I didnt think of that at the time, good point
@TylerGoelz2134 жыл бұрын
@@tweedbean what do you think would block it well?
@tweedbean4 жыл бұрын
Tyler Goelz there isn’t an off the shelf solution, maybe cut a piece of plastic to the right shape and use adhesive to stick over the hole left into the cabin. Or a tiny bit of expanding foam. Not too much as you don’t want to make a mess inside/outside the cabin
@TylerGoelz2134 жыл бұрын
@@tweedbean I figured.. I'll work on a custom solution. If you end up doing it yourself would love to see the DIY video 😁
@99ewar6 ай бұрын
does it trigger any code?
@tweedbean6 ай бұрын
Not at all
@BrianGillings7 ай бұрын
Why would you install it and not let us hear how it sounds?
@tweedbean6 ай бұрын
The whole point is it removes the sound being pumped into the cabin, it removes sound not adds it
@BrianGillings6 ай бұрын
@@tweedbean ahh! I see. Thank you.
@Freddie.0.46 ай бұрын
@@tweedbeanhow much sound does it remove is it noticeable? As I want the yellow hose
@kieronjennings95814 жыл бұрын
Hi what size hose clips did you need ?
@tweedbean4 жыл бұрын
Sorry I cant remember off the top of my head, I'm sure my hose came with them. If you measure the hose when it arrives, and go a little bigger. I dont own the car anymore so cant go and measure it for you.
Completely different engine. en.m.wikipedia.org/wiki/Ford_DLD_engine#DLD-416 so very much doubt this would fit
@MattyB-ee Жыл бұрын
Why?
@tweedbean Жыл бұрын
The stock pipe is restrictive and also stops you losing any of that flow purely for pumping noise into the cabin.
@222Ironwood3 жыл бұрын
Waste of time. You don't even inform us of it's worth it. No sound clips no info.
@tweedbean3 жыл бұрын
Hi thanks for watching, the title of the video is how to fit the pipe, it wasn’t meant to be a review, it’s an instructional fitting video. I can tell you it made no difference to the noise of my car and is it worth it, I’m not 100% convinced other than it looks nicer