First test run with my custom made twin engine truggy. Both engine are modified by ABmods. I have some bug to fix, pulling hard on the left on accel, too wide ratio, seal carbs. eliminate center diff.
Пікірлер: 153
@toenoblefb86277 жыл бұрын
They both sounded beautiful together.
@RivalsHDmodder5 жыл бұрын
wtf
@gmax87615 жыл бұрын
THAT WAS AWESOME! CONGRATULATIONS!
@imdanicklebum16 жыл бұрын
very nice.... good work. i like it when people do something dfferent instead of all being sheep. hey, at <a href="#" class="seekto" data-time="52">00:52</a> what wheels and tires are they? and are they 17mm hex? cheers fella
@moorrc70865 жыл бұрын
Awesome build... 🏁
@LukesVintageRC5 жыл бұрын
Love the sound of those Piccos
@MikePeperni16 жыл бұрын
Will take a look for sure man, love to see other's modded engines! :D
@JonasBerntsson16 жыл бұрын
Totally awesome project man!
@Carlos-wj3nu5 жыл бұрын
Thats one amazing machine
@bigMikeRomero15 жыл бұрын
That is sick!!! Nice truggy!
@OMEN-TV6 жыл бұрын
Nice idea and execution 10/10
@Thedefinitionofresh9 жыл бұрын
awesome fabrication work...thumb way up!
@MikePeperni9 жыл бұрын
Fav chacon thx! :)
@nickgraupman84573 жыл бұрын
Sounds so good
@davidchapman35636 жыл бұрын
Nice rig!!
@MikePeperni16 жыл бұрын
Thank you :) It is based on the OFNA Violator buggy drivetrain.
@ThePhilT16 жыл бұрын
ca ces du twin!!! nice setup ca doit etre vraiment cool a tuner \!! Bravo 5/5
@samuelwong41527 жыл бұрын
Sweet sound
@MikePeperni15 жыл бұрын
Thx :) just took my time to setup the linkage so they open at same time. :)
@averyseeton40376 жыл бұрын
Looks beast
@royarsey54297 жыл бұрын
this is wicked -bad ass build..
@Nick.Tran77772 жыл бұрын
Nice bike !!!!
@rcpatapouf6 жыл бұрын
Pretty impressive
@snchris112 жыл бұрын
very nice project mike...im thinking about making a twin engine thunder tiger eb4... started designing the chassy
@MikePeperni16 жыл бұрын
They are OFNA "3 splits" white wheels that i dyed in black, using rit dye :) Tires are Bowtie MT..
@16-BITFPV Жыл бұрын
I miss Ofna and Jammin so much
@baxter64778 жыл бұрын
That's awesome!
@KAZT4R6 жыл бұрын
very good video.
@MikePeperni15 жыл бұрын
One engine was older, they are the same, but one is pullstart, didnt had the money to get 2 brand new one identical :) thx!
@RcAVENTURE.V.F.R6 жыл бұрын
Waho extraordinary brother 👌 👌 👌 🔝 👍 👍 👍 👍 👍
@boredmud15 жыл бұрын
Thank you for the reply about the throttle sync, another question I have is why you don't start both engines together, were they broke in the same or was one already running and the other came when you made you monster?
@MikePeperni15 жыл бұрын
Yes , they are pretty powerful for their price. and even better once modified! :)
@mcnitro8742 жыл бұрын
Awesome bro simple just awesome
@boredmud15 жыл бұрын
Awesome Truggy, was syncronizing the throttles a pain or just trial and error?
@ErichHaubrich8 жыл бұрын
Amazing!
@MikePeperni16 жыл бұрын
Your right didnt noticed that until now :D thx :)
@Chris-Workshop14 жыл бұрын
at <a href="#" class="seekto" data-time="49">0:49</a> or <a href="#" class="seekto" data-time="54">0:54</a>... what wheels are that? coolest ones i've ever seen. want to buy some for my own truggy.
@Ninjasloth115 жыл бұрын
Is the engine your using worth getting?? great vid
@MELSELECTA10115 жыл бұрын
nice car great video.... did you ever think of going gas? 1/5 scale?
@scrogathon16 жыл бұрын
hey mike what wheels are using on this, they look awesome.
@MikePeperni15 жыл бұрын
Thank you! i thought about it , may be next year! :)
@MikePeperni11 жыл бұрын
they both have an ABmods drag mod, im an ABmods racing driver. It was way overgeared in this test run, one engine had a leak and it was near freezing temperature. i did another test later with a 2 speed transmission, you can see it on my channel, i think its radar test ... :) and i can mod nitro engine as well. :)
@MikePeperni13 жыл бұрын
@JokerPesca They are Panthers paddle tires :)
@MikePeperni14 жыл бұрын
@cafeboni Thx :) They are made by ofna, i think it was MT3 split .... not sure. they have them in different color, mine were white and i dyed them in black . :)
@16-BITFPV Жыл бұрын
Rit die old school cool
@kaycee93375 жыл бұрын
I know it doesn't make much difference but it looks so cool smoke coming out of both sides it's just the idea is awesome nice job. I'm thinking you just drilled for hose for the motor mount
@MikePeperni5 жыл бұрын
It was not setup well tough, it was not doing it any justice at that time, done properly its a huge power difference. I wish i had the time and the money to try again with the parts available now! :)
@scrogathon16 жыл бұрын
Thanks alot, finally got the video up of my lightly modded lrp/buku speed runs if you want to check it out.
@MikePeperni14 жыл бұрын
No problem, i used 6061 aluminium for the chassis, for the motor it doesnt matter, because they never spin at the exact same rpm anyway, and the vibration is not too bad. :)
@MikePeperni13 жыл бұрын
@chonyc77 thx, but, in this first run it was overgeared, with a center diff, and it is built like a truggy, so dont expect it to do wheelie as easily as a savage... i guarantee you it will keep up with a brushless on 6S. It was a first run so it was not setup right... Here it is on my bashing setup, geared for acceleration it still got 67 mph with ease and enought power to wheelie even with slipping tires. browse in my videos and look for ''twin engine truggy radar test run''
@MikePeperni15 жыл бұрын
The total cost with engines mod was about 1500$, i sold it as a roller for 300$ to a friend.
@tuscanland14 жыл бұрын
Hello there, I just wanted to ask you if you notice a significant difference in power between the bump start engine and the pull start engine.
@MikePeperni15 жыл бұрын
I did a custom chassis, one engine each side of the spur gear. :)
@RccarsUK5 жыл бұрын
Awesome
@MikePeperni15 жыл бұрын
Its an hobbico handheld bumpstarter with an ofna starter disc on the shaft :)
@mikesrcgarage5 жыл бұрын
With the right gearing tuning and getting it synced right that will be a monster! paddle it up an go blow some snow! Nice!
@MikePeperni5 жыл бұрын
thx! glad someone seen it was just a first test, it was a monster with proper gearing and setup.
@mikesrcgarage5 жыл бұрын
Very kool!
@MikePeperni16 жыл бұрын
Thank you :) It will be better once all the bug will be fixed. I will be able to let the engine rip :)
@md247life86 жыл бұрын
Sweeeeet good tork
@johnrouthier57406 жыл бұрын
Best part of this video was towards the end when I heard Ozzy.
@New2Kendo6 жыл бұрын
You need to modify a bump box and ditch the pull start and drag race that beast
@MikePeperni14 жыл бұрын
Theres a slight difference, the FTT version(bumpstart) have a turbo head button and a slightly different timing profile, but its not like night and day difference... :) The pullstart version is still plenty powerful.
@A_Man_In_His_Van6 жыл бұрын
On a side note, that chassis looks awesome. I know its just 6061 polished, but damn.
@MikePeperni6 жыл бұрын
Thx! :)
@A_Man_In_His_Van6 жыл бұрын
MikePeperni im thinking of getting a vrx 1E. Looks to be the same chassis. Did u have a metal fab shop do that chassis or did u do it yourself?
@MikePeperni6 жыл бұрын
That will be nice :) i did it all by myself, started with doing a jig then used it to do the new chassis, i used a trimmer (small router) to do the outside edge.
@basspro3736 жыл бұрын
Live the song, Ozzy and Randy Rhoads kills this song so awesome.
@yee46185 жыл бұрын
I agree its an awsome track! But Crazy Train was Zakk Wylde :)
@cobraflaco15 жыл бұрын
sound is reminding me of that from a audi quattro S1.
@MikePeperni16 жыл бұрын
Its OFNA full offset wheels with Proline bowties MT.
@MikePeperni16 жыл бұрын
One engine each side of the spur gear :) the tuning is not too bad,all in all, the stronger engine is helped by the other one...
@imdanicklebum16 жыл бұрын
i just did a quick search for those wheels and not much came up. tower has some similar but are only 3 spoke with the chrome rim. im looking for all black. can you please tell me where i can purchase these from? thanks again.
@MikePeperni15 жыл бұрын
on a "normal" gearing i got it up to 67mph, using a 2 speed transmission. It was able to pull wheelies in 1st gear.. :)
@nikojak0915 жыл бұрын
how mutch did it cost youu to make it and did you get your money back on it
@benwoodcock102811 жыл бұрын
nice !!!!!!!!!!!!!!!!!!!!!!!!!
@JakeHughes-oo7gy3 ай бұрын
How would the transmission hold up to this power
@lennyhester15596 жыл бұрын
i was thinking about a twin engine build myself. however i wanted to do it different than this. I've seen a few side by sides. but i want to do one engine for front wheels and one for rear wheels. I'm new to the hobby and just wanted to do something i haven't seen but also wondering if there's a reason i haven't seen it. thanks awesome build!
@leemilica6 жыл бұрын
There is a reason. Nitro engines are not stable, so if the rear wheels get more power, it may spin out, and you will drag your rear wheels if the fronts speed up. It is an overall catastrophe.
@hascet16 жыл бұрын
How much did it end up costing total?
@jeffreywarfield32886 жыл бұрын
What wheels are those?
@shattaD15 жыл бұрын
I wud like to know more about the starter u r using
@Hbfreak938 жыл бұрын
hi dude, what tires and wheels? they look great!
@MikePeperni8 жыл бұрын
+smwsh42 I dont remember their name, but they are from ofna, you can search in towerhobbies website you can probably find them there. :)
@ivandrrccoffie77343 жыл бұрын
Hi. Awesome. Dont know how come i see it 12 years later. Just want to know : how you combine the clutxh system to connect to center diff?
@MikePeperni3 жыл бұрын
Thank you :) All you need to do, is line up the engine with the gear, both engine each side, they will both spin the spur gear the same way(center diff) the weakest engine will push/help the stronger engine, no matter which engine is slower, you dont need to do anyhing it will work. Id suggest to tune the engine one at the time tough. :)
@ivandrrccoffie77343 жыл бұрын
@@MikePeperni yesss. Thanks. I thought but wanted to confirm. And the spur gear is metal? Which brand. I want to build something like that. Just for show purpose but has to work.
@MikePeperni3 жыл бұрын
@@ivandrrccoffie7734 no problem :) it was metal, it was from ofna if i remember same brand as the buggy that was used as the base of the project.
@louiedomingo12986 жыл бұрын
nice...
@MikePeperni15 жыл бұрын
Thank you for all the comments :)
@aussiefreerun16 жыл бұрын
thats F'n maddd!!!! 5 starts 4 u
@MikePeperni16 жыл бұрын
Oh , i dyed the wheels in black, i used the white OFNA wheel part # 81155
@jethrowittam4499 жыл бұрын
so am I right in saying you just had the engines put onto that gear on the dive shaft??? wanting to do somthing like this my self :p
@MikePeperni9 жыл бұрын
Jethro Wittam Yes, just instal 1 engine each side of the spur gear and the clutchbells will make them run together. Goodluck! lots of fun to build :)
@minibikemadman11 жыл бұрын
These motors run wayy more efficient after some timing changes and porting. If you keep it wot all the time it will be. IErcm mods piccos clockwerks does also.. Ab mods etc.
@killaho648 жыл бұрын
kewl
@griffon77256 жыл бұрын
👏👏
@minibikemadman11 жыл бұрын
I run all Lrp's now 28s3 and a 30x.. the 30x is getting modded but i did scoop a picco p3 for $30 that needs a con-rod. The same seller has 2 p3 27's i might grab also.. ive heard modded those will scream like a .21
@gabriellarouche3702 Жыл бұрын
Sa jaime sa très beau build 🤘🇲🇶 il faut plus de nitro fait 1ans je suis dans le nitro et pu jamais de électrique lol
@predxene13 жыл бұрын
Gas Hog ?
@djjohn17147 жыл бұрын
this song is off of scary movie lmao
@jinspade1616 жыл бұрын
i wish i could afford such hobby :(
@victormartinezcunado36726 жыл бұрын
Cómo lo haces
@AlwaysCovered12276 жыл бұрын
Do you really get double power just thinking if both engines are on the same spur gear and spinning at the same rate is it really double power just asking because I wanted to do this but I looked at like having two 12 volt batteries hooked up parallel it doesn't give more power only when in series
@MikePeperni6 жыл бұрын
Theres a lot of factor that come into play, but its 2 time the power on the same spur, the added engine and tank add some weight but it is quicker than one engine only, a lot of power, i have a video of it with a 2 speed transmission geared for bashing and it got up to 67mph with not a lot of runway, and the chassis was not set up right, it was torque steering on acceleration...
@Beng1776 жыл бұрын
Having two motors increases acceleration and allows a higher top speed since there is more power to counter-act the drag of air. You could also run a higher gear ratio/ bigger tires to gain a higher top speed because you have the extra power.
@yakanies6 жыл бұрын
The horror of getting your fingers cauught up in that...if you are stupid enough
@Chris-Workshop14 жыл бұрын
@MikePeperni thank you so much, i found them. calles MT 3 splits by ofna in yellow green and white. but no one sells them in germany, too bad.. sadly i dont know when i get a change to buy them myself in the states.. we'll see, but thanks alot anyways. have a look at my picco p3 .28: watch?v=ydATQ1ZqEqs
@TheNewbpowner12312 жыл бұрын
can you mod a picco when you are in europe?
@koreylasante39915 жыл бұрын
Why music over the engines ,why ?
@SargeScum6 жыл бұрын
Wow
@Jonualike8 жыл бұрын
J'viens d'arriver icitte par hazard en checkant des vidéos de RC. Le monde est petit.
@MikePeperni8 жыл бұрын
+Maxx Mathers Hehe!! oui faut croire! le résultat final était plus violent avec ce truck la, j'ai un autre video avec une transmission 2 vitesses et il pogne 67mph comme comme si de rien était.
@chonyc7713 жыл бұрын
First let me say great work on the project. I give you much credit for that. Its just funny how even with two nitro engines, it still does not look to have the power a 1/8 brushless set up could give you. My Savage Flux on 4S looks to have double the power of those two engines, never mind 3S. Either way, great job!
@Echo5115 жыл бұрын
just have a center gear they both pull on...
@nikojak0915 жыл бұрын
are you bilding any thing elce
@blastedlife42057 жыл бұрын
couldnt you theoretically put the glow starter on one pull it then put the glow starter on the other motor and let the clutch do the work
@RICHOWASP6 жыл бұрын
no because the motor that isn't running has it's own clutch.
@A_Man_In_His_Van6 жыл бұрын
Lol
@dannyleemerced37478 жыл бұрын
😃👍👍
@Montreal_Audio_Systems5 жыл бұрын
Québécois!!
@rrrtbds1222313 жыл бұрын
ive tryed to break an engine in during a cold ass day. its not easy.
@MikePeperni16 жыл бұрын
Without the engines may be 800$ including the car used tobuld the truggy.
@MikePeperni13 жыл бұрын
@HungDGunn It done it :) and its brutal lol you can browse in my videos, look for ''twin engine truggy radar test run'' :)