Tymate pressure monitoring system (trailer TPMS) is it worth it or not?

[@ryanrestua8987]

Greg, thanks for the video. It was great meeting you and your family at Casini.

[@pursuingthedaydream]

@@ryanrestua8987 it was nice to meet you and you family as well. If you have any questions about rving or anything shoot me a message and I can help you out or give you advice

[@Propnut48]

Sold me on it !👍👍👍😊 Thanks Was looking at these on Amazon. Didn’t want to pay the $3-400 for the “ other” more expensive ones when I don’t use the trailer that much.

[@pursuingthedaydream]

I have nothing bad to say about this one. It actually just recently saved us from having major damage done to the trailer. Had a blow out on the freeway. It went off immediately and I was able to pull over fast with out causing any damage to the trailer. If it wasn’t for this I would have keep driving cause we didn’t feel the tire blow. 💯 recommended tpms to anyone.

[@livelovehollister-jerrychr6970]

Recommend tightening valve stem prior to installation just to be safe 👍🏼. First, charge for two hours before installing. The sensors are 13:01 numbered to the vehicle diagram on monitor, install accordingly. Set high/low temp. Boot installation on my instructions diagram is mistakenly reversed.

[@parneypots]

Good vid…didn’t need to see installation of all 4 with music

[@pursuingthedaydream]

You’re right I could have speed up the video to make it faster. Still learning. Thank you for the feedback back tho

[@Hundert1]

Was good till the music came on. The setup is what can be confusing and what I'm still not 100% clear about. Their videos and instruction papers aren't very good. Do all the sensors come coded right from the box?

[@pursuingthedaydream]

Mine came pre programmed for what wheel to go on. Also had stickers on them for what wheel to put on.

[@Hundert1]

@pursuingthedaydream Thank you, so we just charge it fully, turn it on near our tires, and screw the sensors on? That's it, and we're all set to drive?

[@MYCHANNELWITHMYSTUFF]

Do you have an update on this product? How is it performing after a year?

[@pursuingthedaydream]

Going to do a video on it here soon, but after a year the system is working great. Only complaint that I have is sometime it takes about 15 mins for the display to register the sensors when first turned on. It’s just nice being able to see the temps and pressures

[@treefiddy2470]

Thanks for the video. Any update on this, have they been working well?

[@pursuingthedaydream]

They work great. It’s such a great peace of mind to know what your trailer tires are doing while driving.

[@jameshodge3182]

Apparently they don't come with dust covers anymore

[@pursuingthedaydream]

O that’s not good. The dust covers protect the sensor in my thought

[@jameshodge3182]

@@pursuingthedaydream guess they rely on the "o ring"

[@jameshodge3182]

Oh and the high/low parameters are preset. You cannot program when to be alerted.

[@salvor1]

too quiet voice horribly loud music

[@Hundert1]

Exactly, I don't come to device instruction videos for musical entertainment.

[@alanmccurdy5400]

Music is horrible, very distracting.

[@pursuingthedaydream]

Thank you for the feedback. I can see what your saying and am going to make some changes to the videos I make this year. Stay tuned coming back with more videos this year.