Typhoon H landing gear. Servo repair.

I had a recurring problem with my landing gear not coming down on one side. after 2 repairs I decided to do it properly and make a tutorial video while I'm at it.

[@ross9481]

I found it extremely helpful to take a picture to remember the assembly right after you remove the cover and then print it enlarged. After buying one because of a crash keep the others for spare parts!! Nice video, thanks.

[@KTHKUHNKK]

I watched your video a long time ago and even after 5 years it's still good. Believe it or not I'm still flying my typhoon h480 in the year 2023 I know what a bugger it is taking those landing gear assemblies apart. I've been through that a couple times. Keith

[@Theoregoncoastexplored]

Got home from flying and noticed a landing leg loose. I thought i broke it but i only catch so never once landed on ground. So was confused til you showed you can flip upside down and let gear fold out. Fixed the issue so thanks for video.

[@crazycrow3378]

My pleasure, glad to help.

[@jasonrobayoguitarrista5292]

Man, thank you very much. I followed your instructions and the landing gear es working again!!!

[@crazycrow3378]

Glad to be of service

[@AlfredoAlbanez]

Superb video! thank you! I'll try my landing gear tomorrow

[@freemanwhite3]

Thank you for posting this video! You got me back in the air though I didn't have the exact same problem. I was just looking to replace the landing gear motor but your knoledge goes much deeper. Cheers!

[@crazycrow3378]

A Free World Productions you’re welcome. Always glad to help.

[@KTHKUHNKK]

You are an expert brother. I wish I could solder like that.I have a pair of headphones that I'm going to attempt to put another Jack on. Actually I'm looking for somebody to do it.

[@crazycrow3378]

Good soldering is not an art. It just takes practice and a good iron with the correct tip for the job. but the most important thing in my opinion is flux. Never start without it. I found the best flux is the stuff you buy at the hardware store to solder copper water pipes. Ask for S-39 soldering flux.

[@BCS_Official]

Oh my God... bro you saved me. I was at the point of buying another new drone. It I just repaired mine. God bless you brother. Yaaaaayyyy I'm a new subscriber. Let's fly safe. Dexter BRAINS from Brains Concept Studios

[@ssureshot]

THAT's what a DIY video should be. Thank you...

[@crazycrow3378]

Thanks. Glad to help

[@KTHKUHNKK]

ONCE AGAIN - - EXCELLENT JOB KEITH

[@Dafinegrete]

Me salvaste en el 2024 1 de junio 😁🫡

[@morenodelosazules]

Great job. Thanks for sharing.

[@skyoneaerialtm8786]

Thanks for this helpfull Tutorial, i repaired my Servo yet with your instructions! :-) (Y)

[@crazycrow3378]

SkyOneAerialTM Always glad to help.

[@glennedwards3704]

Thank you! I only had to replace the landing gear seat but there are no videos out there tagged with that. Maybe add that to your tags so others can find it as well.

[@crazycrow3378]

GLENN EDWARDS Good point. Will do.

[@brunoitey822]

Thanks, well done! Following your tutorial, I took one apart an noticed that the screw of the mechanism is bent due to a "hard landing".... Would you know where to order a new one?

[@crazycrow3378]

I wouldn’t know where to find one right now but I do have some part numbers that might help your search. The bracket that holds the leg is YUNTYH131 and the complete motor assembly is YUNTYH109SVC. I have never seen the screw sold seperately. If you’re handy with a lathe you might be able to machine a new one from a bolt or piece of threaded rod. Good luck on your search and if you have any more questions feel free to ask.

[@cowboys9094]

How can I tell if this is what's wrong with mine? Both landing gear won't go up.

[@crazycrow3378]

Have you turned your copter upside down and tried the gear switch? Maybe you changed a setting on your controller and reassigned the function for your gear switch by accident?

[@AlfredoAlbanez]

Do any of you know the voltage and current of these? in order to test them on my power supply.

[@crazycrow3378]

Sorry for the late response. I wouldn’t know for sure but I expect 5 or 6 volts like any other servo used for landing gear. I can not test this because I no longer have my Typhoon H.

[@Polovex]

Good tutorial!

[@crazycrow3378]

thanks, glad to help.

[@KTHKUHNKK]

I DOUBT IF YOU WOULD KNOW BUT ANYWAY. I PRESSED THE RED BUTTON ON MY ST 16 AND THE DRONE TOOK OFF FULL SPEED AND CRASHED INTO A TREE. WOW ANY IDEAS WHY. I AM WAITING FOR YUNEECS VERDICT IT IS UNDER WARRANTY. KK

[@crazycrow3378]

Wow that's an unexpected event. All I can tell you is that it ain't supposed to do that. But you must have figured that out yourself already. Yuneec will probably send you a new one.

[@connorleferink8456]

What gauge wire did you end up going with? Thank you for this amazing tutorial!!!

[@crazycrow3378]

It's 22AWG wire that I cut of a JST connector from Banggood

[@marisaamoros785]

gracias :-)

[@KTHKUHNKK]

GREAT JOB BUDDY NO KIDDING KK MOTION PICTURES ALSO ON KZbin KEITH KUHN

[@crazycrow3378]

I'll have a look. Thanks for the compliment.

[@NoName-hr8zu]

Please buy a different and better microphone.

[@crazycrow3378]

Will do!