U03. How to Upgrade Siemens S7-200 to S7-1200, Migrate Micro/WIN Program to TIA Portal

[@apodsilvaticus6489]

Dude, you saved my project. As old S7200 are a little bit scarce on my area, I got a machine with a dead one that needed replacement and after hours researching for a port tool I found your video. Very precise, it will save days from manual line porting. Really thank you.

[@electricalautomation]

Thanks a lot! If you need sth new about S7-1200, Pls let me know or send email to me.

[@braianbaeza2549]

Hi, I installed the software, however there is no converter. Could you share me the link? Thanks in advance

[@HamzaKhalil-t7b]

i installed v11 sp2 but there is no conversion tool built in , do i need to activate that from settings?

[@electricalautomation]

The Software TIA Portal V11 SP2 download link is under the video : support.industry.siemens.com/cs/document/106449434/simatic-step-7-(tia-portal)-v11-sp2-trial-download?dti=0&lc=en-WW

[@SmilerBFC]

No longer available 😢

[@RicardoCastro-kg2go]

Do you have a download link? Any web Page? Is not available in Siemens, now is update and the option to migrate is not appear

[@matgougeon3087]

I donated and requested on your Google Drive, thanks!

[@electricalautomation]

Thanks for your donation, assigned, please check the folder.

[@gervas8457]

Hello I installed Tia v11 sp2 but there is no converter. Could you please share the link?

[@electricalautomation]

Shared, pls check

[@shashibhushanpandey616]

I am looking for conversion of my project. Can u convert my project to TIA.??

[@electricalautomation]

You could send me email and let me have a quick look

[@francodanelutti4071]

do you have the links for download the tool S7-200 to S7-1200?

[@electricalautomation]

Hello, as I introduced in the video, there is no available official link to download the S7-200 -> S7-1200 tool anymore. But you can download TIA Portal V11 SP2. You can find the link under the video.

[@keesmolenaar9431]

Hi, I down loaded the program from siemens but no tool included. Can you share the link to me please? Tanks

[@electricalautomation]

You can find the shared link under the video.

[@sharief1972]

Thank you for your effort

[@electricalautomation]

Thanks!

[@ivojunior2600]

Is it only possible to convert to at most the tia portal v11?

[@electricalautomation]

I would say yes. I can use higher TIA Portal version to open the V11 project after you upgrade. Note that you have use TIA Portal v13 sp2 open it firstly, then use >=14 open the V13 sp2 project.

[@ivojunior2600]

@@electricalautomation And so on until the V17?

[@miguelzepeda9968]

hey there, is it available the S7-200 to S7-1200 program converter tool Link? and works your paypal count for donations?

[@electricalautomation]

Please use donation link, then your request will be reacted in time. Thanks!

[@SmilerBFC]

Youre the best!

[@mustafajaber6573]

Hello, Can you give me access to the tool? I sent a request. Thank you

[@snejik_rd4081]

I need tool to remove POU password for microwin smart.If you have plz give me.

[@hashimadel4561]

I want to migrate a project from Step 7 v5.5 to TIA.I tried the built in tool of TIA but it ends with errors. Can anyone tell me the steps of migrating a project??

[@electricalautomation]

You can use the option 'Migrate Project' in TIA Portal to migrate Step7 project. But I highly recommend reading details on the following two links support.industry.siemens.com/cs/document/62100731/what-are-the-requirements-for-migrating-a-step-7-v5-x-project-to-step-7-professional-(tia-portal)-?dti=0&lc=en-CA; support.industry.siemens.com/cs/document/109478811/migration-guide-simatic-s7-300-400-to-simatic-s7-1500?dti=0&lc=en-CA

[@SY-sc9gx]

Hi, i installed all on a Windows 7 Runtime. The converter is not existing. Can you accept my Download request? Thank you already

[@electricalautomation]

Shared the link to you, please check.

[@SY-sc9gx]

@@electricalautomation Thank you, do you have also a video for Wincc 2008 to Tia?

[@Рома-ф3х3т]

Please update the link to download the files, siemens removed them from their website

[@electricalautomation]

Thanks for letting me know, likely the software V11 is not available anymore from Siemens. Let me know your email, I will assign my google drive permission for your to download.

[@RicardoCastro-kg2go]

Hi, I need that versión, I can't migrate S7200, no option available. Can I get the link to download?

[@gilbertdevera3339]

Hi sir do you have idea to migrate micro win to tia V16 please help me

[@electricalautomation]

You can send me a email and attach the S7-200 program, I can have a look. Email address can be found at the beginning of the video.

[@gilbertdevera3339]

@@electricalautomation do you have email

[@gilbertdevera3339]

@@electricalautomation can i get your email address sir

[@felipecastro7867]

@@gilbertdevera3339 his email is displayed in the beggining of the video

[@yoseanbarrueta6393]

Hello , I sent a request to view the google drive link for the conversion Tool. can you accept it?

[@electricalautomation]

I didn't get your request, may be you can try to apply again. Also please read my comments under the video carefully

[@yoseanbarrueta6393]

@@electricalautomation listo

[@panchajanya8615]

​@@electricalautomation brother please share the gdrive link.

[@iL_Sol]

Thanks so much!

[@electricalautomation]

You're welcome! Welcome to my channel!

[@mohamedhany7525]

Hello , I sent a request to view the google drive link for the conversion Tool , I need it in my project , Thank you sir

[@electricalautomation]

pls check, I shared

[@ngocsonchu9431]

it can run on win 10 64bit?

[@electricalautomation]

No, TIA Portal V11 SP2 is only compatible with WinXP and Win7. I talked the OS issue in the video.

[@ngocsonchu9431]

Thanks.

[@ngocsonchu9431]

new app of siemens havn't this funtion? i mean v16, v17

[@electricalautomation]

No, only TIA Portal v11 sp2

[@harshasami6758]

How to convert s7-200 t0 s7-1200 Tia portal V16 is possible sir

[@electricalautomation]

Hello my friend, you need TIA Portal V13 incl. SP1 or TIA Portal V13 incl. SP2. The migration path is TIA Portal V11 -> TIA Portal V13 SP1/SP2 -> TIA Portal >= V14. It looks weird, but it is true, you need v13 SP1/SP2 as the interface.

[@hajarsikal3527]

Hello , I sent a request to view the google drive link for the conversion Tool. can you accept it? , I need it in my project , Thank you sir

[@electricalautomation]

Accepted, enjoy it.

[@hajarsikal3527]

@@electricalautomation thank you very much. can you tel me how it works ?

[@jcautomation5802]

Buen día está muy interesante el video, me podrían compartir el enlace

[@mileskelly8739]

I donated to your program but my paypal email is different from my actual email, can I have access to the google drive? I put my actual email in the comment when I requested

[@electricalautomation]

Thanks for your donation, your email m.d.kelly has access. Please feel free to let me know if you have any trouble on the access.

[@rockstarsoulipn]

Hey dude. Could you share me the link? please

[@electricalautomation]

Shared, please check.

[@adriannarvaez9042]

Ya realicé el procedimiento con la donación, solicito el link de descarga

[@electricalautomation]

shared, enjoy

[@muhammadhakim3982]

I already donate to you. Can you approve my request download? Urgent matter.

[@electricalautomation]

approved, please check, thanks for your donation

[@samuelpereira8524]

Hello , I sent a request to view the google drive link for the conversion Tool. can you accept it?

[@brunoalcocer7528]

Hello , I sent a request to view the google drive link for the conversion Tool. can you accept it?