Ubiquiti NanoBeam AC Complete Setup Access Point

[@darrencollyer9829]

Thank you for this. Helped me a lot

[@bxx7666]

Works perfectly! Quick question: How do I add additional APs? When you setup the Station at 21:46 you chose the SSID of the AP. If I have more than one AP, won't there be multiple options? Thanks!

[@chris_ramirez]

How do i get a camera to work out of the secondary port and into my nvr?

[@trashman1613]

What’s the difference this and the nano station?

[@allangabriel5714]

Thank you very much, it helped me a lot!!!

[@basilixristoforos204]

Good Evening!! the ubiquiti nanostation m2 antennas is there a possibility that they interfere with mobile telephony??

[@18jhall]

Hi, I had this setup installed by FarmFi a local installer 2 years ago and it worked perfectly. 4 months ago I had to replace my router in the house by my internet provider, now I have a password for it to work, before I never had one. After they changed my router, I no longer have internet in my shop, which is 1000 feet away from house. Farmfi has not responded since 12-01-22. So I am going to try to figure it out. Can you help?

[@UbergeeksBiz]

Hi. I believe you called my office. I'm more than happy to help. Based on what you wrote here, I think FarmFi setup static IP on. After changing your router, the IP is not the same, therefore you shop has no internet.

[@18jhall]

@@UbergeeksBiz Thank you so much for taking time to help me, A neighbor sent his buddy over to help me. Again Thank You

[@TawandaDiza]

yu Nailed it, thanks

[@linnerdclayton7030]

You litarely did not show the WiFi connection (what the purpose of those things truely are) !!!!

[@Terzy1984]

How can i find the network for A when you have disconnect It to setup the B

[@UbergeeksBiz]

You cannot disconnect A while setting the B

[@ghk84]

can mobile devices connect to this access point or its for AirMax devices?

[@UbergeeksBiz]

Yes

[@nicholasaxelberg8167]

There are so many things wrong with this video. Please take this person's advice with a grain of salt.

[@UbergeeksBiz]

what is wrong with this video ? explain yourself.

[@nicholasaxelberg8167]

Sure. Not even mentioning that they broadcast a WiFi network for 15 minutes after you power them on? Seems like good info, especially if someone has already mounted their devices. Don't need a default gateway when configuring. Using the default username is leaving yourself open for brute force attack. Seem very confused about channel width. Narrow channel is more efficient, but slower. Wider channel, higher throughput is possible, but more likely to be negatively impacted by interference. Best choice will vary by environment and preference. Power output, you chose 3 because you don't like negative numbers? Why 3? No mention that you should avoid overpowering because it will actually make your signal seem better but actually be worse. Second AP's power should be the same as the first one, not just because you like 3. Firmware updates? You called the AP a camera. Alignment?