UDR Sand Paddles on the Losi SBR 2.0 Brenthel

[@slysplasteringsly1012]

Looks like it digs to the belly pan and aqua Plaines. So stable . You have a drag combo set up . Now MAMBA with wheel extensions. Can't tear up that boddy

[@seanclarke4061]

the pin that holds the drive shaft to the out drive on my front right came out 2nd run! Lost it in the sand for sure. Surprised to see that happen so quick, but at least it was a cheap replace. This is my new favorite truck! definitely worth it over 6s short course. Way to go losi! They do need some paddles for it thouh!!! sell out instantly

[@obs_willard_175]

Wow she’s got some power !

[@idahorcguy7760]

They're so small makes it look funny lol

[@ggwbrc]

Awesome buddy 😍 I love it, love the dust 😍

[@artsyrc]

This RC is a beast on sand! love the paddle tires haha

[@slysplasteringsly1012]

It would look like the boys whome put angle grinder blades on there cars as wheels . . . And your bling. What a weapon

[@Miguel.herrera.71]

Lol... they look so tiny. Great video brother!

[@moistavocado2350]

I'm really surprised no one had made paddles for this truck yet! Hopefully Proline steps up and makes some soon.

[@carlmartin2521]

Hey exo, so I cut the bedsides to make them removable and put a set of xmaxx paddles in the back with the stock wheels up front. There are the same height so no issue there. Hooks really good in the sand, especially out here in glamis. Might wanna give that a shot. Love the vids💪

[@diskfunktional1]

Did you have to change the hexes?

[@gasolinediesel972]

You sure they weren't erevo paddles? The xmaxx tires have a larger wheel hex and are also bigger than the stock sbr tires.

[@ExocagedRC]

Idk man the Xmaxx tires have a lot of offset, 24mm hex and would take a bunch of work to make happen.

[@theirishaxe9405]

Sweet bro!👍👍 Just for fun you should throw some monster truck tires on her!

[@rodf73]

Would love to see it perform with bigger ones. Perhaps you can find a custom chartreuse livery that would fit the bill. ...heard you mention you weren't to pleased with the fit/finish on the decals from the get.

[@ExocagedRC]

Yeah they could have done better on them.

[@slysplasteringsly1012]

Still a BEAST

[@richardsprano4371]

You should do a speed run with them tires on it

[@alexberanjia2049]

Awesome vid and looks sick with paddle tyres. A tiny bit bigger and they would be perfect.

[@bigtasty2271]

it looks funny with those tires

[@jdsrcs8061]

Try slapping on a set of XMAXX paddles!!! Killer vid EXO!!!🤘🤘🤘

[@onemansvideos2134]

40mm hub extension?

[@gasolinediesel972]

They would rub like crazy.

[@Nickwillfixit]

Yep mental machine, watching the excessive movement of the cage and spare wheels, a brace is needed. I think the truck would have driven just as good as it did on the paddles as the stock tyres. I have the clone and the tread is different and maybe better than the stock V1 tyres, which I have on a set of six Vitavon alloy beadlock wheels which work well in sand a bit better than the SDT clone ones but the clone tyres are better on loose dirt and grass.

[@SebastianLong]

2 minutes in. That SBR probably shredded those paddle tires. My UDR only got 2 runs out of mine before they were useless. A company "Top Tuning" makes 24 mm conversions and would allow you to use a set of 1/5 scale paddles. The original SBR and SRR axle nuts work perfectly. The 24 mm conversion is about $25. I can't remember exactly as I purchased them about 3 years ago.

[@ExocagedRC]

I gotta look those guys up!! Thanks!!

[@SebastianLong]

@@ExocagedRC eBay is the easiest place to find them TT104001 is the part number www.ebay.com/itm/362971999740?hash=item5482d12dfc:g:Z5oAAOSwEg9emCPv LOSB3228 is the bronze captured wheel nuts (if you wanted those too) the stock 5ive T wheel nuts LOS252098 will work fine as well.

[@gasolinediesel972]

Now time to put the sbr tires on the udr.

[@ExocagedRC]

😃 won’t fit at all.

[@gasolinediesel972]

@@ExocagedRC Cut the fenders off.

[@slysplasteringsly1012]

MAMBA MAMBA MAMBA MAMBA MAMBA MAMBA

[@onemansvideos2134]

I was going to recommend trying this last video but I wasn't sure if you would get tons of body rub

[@gasolinediesel972]

Why the fuck would it rub? They are smaller than the stock tires.

[@blakedenley3792]

You should try and find a circuit track to run the SBR 2.0 and the UDR

[@ExocagedRC]

I’d like to do that. I may be building a track at the Exoplex in the coming months.

[@blakedenley3792]

@@ExocagedRC oh snap! More fun to be had!

[@mikehagquist5198]

That’s when your solid axle got filled up with sand.

[@Flight6677]

Nice. No larger paddles on the market? This would rip nicely if paddle tires were larger.

[@ExocagedRC]

I haven't found them if there are

[@kevinflores7913]

6:41 was that a reverse entry?🤔

[@meda2ni]

Tiny looking , but performance looks good ;)

[@KingElfin]

Great bash Joe ! I love the way you try swapping parts around. Those sand paddles really hooked up, but tiny. Any way those mambas would fit ?

[@ExocagedRC]

I'd have to get the 17mm hubs for them but yeah they'd fit but the weight of this would probably not be a good thing for them.

[@jhawk1985]

Get someone to 3d print some tires to go on a aftermarket bealock for the losi

[@norcalrc]

They look tiny on there but they perform very large

[@CM-ig2pf]

That thing is a dirt beast! So cool on the slow motion! Just wondering could you recommend some aluminum hexes for the jconepts dragon wheels in 12 mm

[@ExocagedRC]

They make them. They are wide though and not cheap.

[@DaveGlitchHare]

Wheel speed? No problem!!!

[@chrispatterson4435]

Just an FYI. All your Ryft Videos made me buy the Ryft Kit with a HW Max8 2600 combo.. so when my wife questions it I’m blaming you!

[@jlo96f3]

Alright, alright, alright.

[@keaginm2791]

Hey Exo, I just seen a vid and the dude had what looks to be 2.8 proline paddles on his SBR, just letting you know

[@ExocagedRC]

I have some of them too. They are smaller than these I think.

[@keaginm2791]

@@ExocagedRC Dang, ok, I wonder if 3.8s would work?

[@Wazza722]

Looks like it would do better on the standard wheels. It’s just dragging the chassis and nose diving.

[@jeffziola]

Will the sand paws fit underneath?

[@ExocagedRC]

I haven’t tried

[@jfeelgood8075]

Which big desert truck would you recommend: mojave, sbr v1, sbr v2 or udr?

[@ExocagedRC]

right now its a toss up between Mojave or SBR 2, UDR is close behind them and I did not really like the SBR1

[@jfeelgood8075]

@@ExocagedRC is the mojave v2 much better than the first

[@SebastianLong]

The SBR V1 is discontinued. If you're lucky, you'll find one on eBay or Amazon or a similar site.

[@slysplasteringsly1012]

It's a sand drag truck. Bring back sand drags. They rock

[@ExocagedRC]

I love sand drags. Nobody does them here.

[@VortecEmachine]

Nice!

[@bushcrafter6416]

Sand boat.