I understand completely guys...yall are awesome... im a single father trying to show my girls about cooking it means alot sir im gonna burn the barrel out and gonna try to get the 85 $ kit and represent Lubbock tx but if i can't yall guys are awesome..the way its supposed to be...God bless and keep going...texas bbq
@andrewbieler47524 жыл бұрын
Could you explain your paint process to get that shine and why you use what you use? Does the paint stay shiny after some use?
@UglyDrumSmokersTexas4 жыл бұрын
Andrew Bieler I must have missed this... it’s VHT anodized Orange.. it shines on its own . Takes about 5 costs to get this color
@williamlatham61604 жыл бұрын
I like it "that's my next build that color is awesome.
@UglyDrumSmokersTexas4 жыл бұрын
William Latham vht anodized orange from autozone
@rickyguzman50946 жыл бұрын
Hey thanks bro it means alot i luv people like u
@ronm83064 жыл бұрын
Waiting on my kit to get here today. Can’t wait to get started. Great video. Hope mine is as beautiful as yours when I get it finished. Great job.
@markgranados78366 жыл бұрын
Oh my what a smoker can't wait
@rickmooreEz-2chew-BBQ2 жыл бұрын
I just built a UDS with this kit, now $99 bucks. I have to say I am a little disappointed that I didn't order an upgraded kit. The temp holds well at about 260 at 7 on the intake and halfway on the pinwheel exhaust, but I can't get mine over 300 wide open on both ends. I ordered a heat deflector but I don't see any need for it If my temp stays where it is.
@UglyDrumSmokersTexas2 жыл бұрын
Here’s what you need to do. I’m putting the same intake on my three new competition Smokers. I put my brisket on at 450 to 550°.. When you first start your fire, the lid is wide open and the intakes are wide open. Watch the temperature gauge. When it reads 25 degrees below your target temp.. that’s when you shut the lid .. the temp will rise about 50 degrees more and the cold meat will settle her in to your desired temp .. so.. if you’re trying to cook at 400°. Once your thermometer gets to 375°, shut the lid. It should rise to about 425°. Once you put the cold meat on it will bring it down.
@ledhed57176 жыл бұрын
1:15 “....run you a tape measure” and picks up a level. I nearly fell over laughing. Great build though!! From one Texan to another excellent work. The Aggie smoker is my personal favorite.
@UglyDrumSmokersTexas6 жыл бұрын
Eric Mathis I caught it after and didn’t want to go back and correct. If you see me looking off camera, my neighbor is distracting me as he walk by, jumping around , making faces. It was quite hilarious. II knew it was only a matter of time,
@ledhed57176 жыл бұрын
Ugly Drum Smokers Texas that's funny. I am going to try my hand at building one. Great video.
@UglyDrumSmokersTexas6 жыл бұрын
Eric Mathis do you have Facebook? Join my group Ugly Drum Smokers Texas...and I can give you advice during the build .,
@steverede42025 жыл бұрын
I need one like that takes a lot less room then my offset and a lot easier to throw in the back of my truck
@UglyDrumSmokersTexas5 жыл бұрын
Steve Rede you are exactly correct. It changed my smoking life. Have smoker, will travel .. where do you live?
@banga80804 жыл бұрын
Jerry is a beast with a spray can 👍🏽👍🏽👍🏽
@BadBeastBarbecue6 жыл бұрын
Nice kit, need one of those!
@UglyDrumSmokersTexas6 жыл бұрын
Bad Beast Barbecue it’s a great deal .,
@royhopkins895 жыл бұрын
Building my smoker having problems finding wheels ... I like the ones on the cooker in the back Where did you find those wheels and how far apart did u install intake tubes .. Nice Smokers!!!
@UglyDrumSmokersTexas5 жыл бұрын
ROY Hopkins 10 inches left and right from center front and back SPACECARE 4 Pack 5" Swivel Caster... www.amazon.com/dp/B0719CF3RQ?ref=ppx_pop_mob_ap_share
@indylive49263 жыл бұрын
great video! what size are your exhaust holes and is there a specific measurement to locate them?
@UglyDrumSmokersTexas3 жыл бұрын
Here is my easy to follow build video kzbin.info/www/bejne/bIbZipyobcSNqpo
@indylive49263 жыл бұрын
@@UglyDrumSmokersTexas that video you showed me is for the 2" smoke stack and not the 5" pinwheel exhaust
@progers50195 жыл бұрын
Love all the drum builds you have there. I really like the way you show how to keep it simple and offer the low priced kit. I was about to do this couple years ago before I got a WSM. Now I'm getting interested in this project again when I watch this video. Nice work and thanks for the video. Do you have a good source for a 55 gal drum.
@UglyDrumSmokersTexas5 жыл бұрын
Phil N Florence I have a source here in Houston
@rickyguzman50946 жыл бұрын
Ugly drum smokers is number one
@PhillipHall01 Жыл бұрын
What kind of paint is that on the orange one in the front? Is that Candy Car Paint? IT SURE LOOKS GOOD!!!!! Phillip Hall
@jasonsaved5 жыл бұрын
These UDS smokers are top notch, what kind of paint do you use? I have tried using the high heat barbecue paint, but every little scratch remove the paint and does not look good.
@UglyDrumSmokersTexas5 жыл бұрын
jasonsaved I used Duplicolor Anodized paint on this Drum
@jasonsaved5 жыл бұрын
How durable is this paint? It seems like the high temp barbecue paint our use will get scratched even if I am wiping the dust off with a rag.
@UglyDrumSmokersTexas5 жыл бұрын
jasonsaved the will scratch easy . But you can put on high temp clear coat. . They sell it with the paint at auto zone . Best to go flat black. Easy to touch up
@WoodyJr272 жыл бұрын
@ugly drum smokers texas was the handle for this particular kit hot when you lifted the lid?
@UglyDrumSmokersTexas2 жыл бұрын
Yes .. it does get hot .. I’d recommend adding a Spring handle
@KillerBandaid5 жыл бұрын
Great video!
@jeffshannon54104 жыл бұрын
I love the color you painted that with! What color is that? Great video
@markgranados78366 жыл бұрын
I would love to buy one custom if possible just can't find one I like until now all ready built
@UglyDrumSmokersTexas6 жыл бұрын
Mark Granados where do you live
@UglyDrumSmokersTexas6 жыл бұрын
You still interested
@rickyguzman50946 жыл бұрын
I will be buying the 80 dollar kit
@cliffordschrader46955 жыл бұрын
Yes sir just wondering if I can get a link or info for the person who makes the team plates? I dont have Facebook though. Let me know and thanks for the great videos
@UglyDrumSmokersTexas5 жыл бұрын
clifford schrader email me at Steve Powell properties at yahoo dot com
@cliffordschrader46955 жыл бұрын
Will do thank you
@robertq8094 жыл бұрын
How did you get that wonderful paint folor?
@UglyDrumSmokersTexas4 жыл бұрын
Robert Williams VHT anodized Red
@UglyDrumSmokersTexas4 жыл бұрын
Sorry, anodized orange
@sardomnumspa4 жыл бұрын
What kind of paint do you use on yours and how do you get the paint so even and smooth? I have seen people use spray cans and it looks streaky and not as uniform and smooth...
@UglyDrumSmokersTexas4 жыл бұрын
sardomnumspa Howdy, I used VHT Anodized Orange.. it’s a transparent paint .. so it takes several coats to get a good color.. The trick is not to do long left and right strokes.. if you go through my other videos I’ve posted you will notice a few that have the streaks you were talking about. So I miss when I tried something different. Instead of long strokes I more or less acted like I had a big eraser in my hand and was trying to erase something on the drum. That is the type of strokes that I was doing. Just snapping your wrist back-and-forth real quick going up and down. The anodized paint is a heavy paint, so it is easy to run. Make sure you were constantly moving and not staying in one place. You will do about five coats or more real light. It gets darker with each coat. It will go from orange to reddish maroon after so many coats Join my Facebook group, Ugly Drum Smokers Texas
@Mauriceandcarolyn Жыл бұрын
How long does one basket of charcoal run? How hard is the refuel process?
@scrivnerfive70193 жыл бұрын
How much do you charge for the Dallas Cowboys smoker
@jeffpeppers33834 жыл бұрын
What colors did you use from VHT? Would like to do one that color for my UDS (Oklahoma State) Go Pokes!
@UglyDrumSmokersTexas4 жыл бұрын
Jeff Peppers vht Anodized Orange 🍊
@danielarteaga35256 жыл бұрын
I like the team logos, where do you get those made?
@UglyDrumSmokersTexas6 жыл бұрын
Daniel Arteaga local guy here in Houston. Does it as a hobby
@danielarteaga35256 жыл бұрын
Ugly Drum Smokers Texas I’d like to have one made with the Anaheim Angels “A” logo. Would he be willing to make it and ship it to me and how much would he charge me?
@UglyDrumSmokersTexas6 жыл бұрын
Daniel Arteaga how can I contact you
@curtismickey65245 жыл бұрын
I want to purchase the Dallas Cowboys UDS. Is this possible? Do you offer shipping? Any help would be greatly appreciated. Thanks Curtis!
@UglyDrumSmokersTexas5 жыл бұрын
Curtis Mickey where do you live
@curtismickey65245 жыл бұрын
Ugly Drum Smokers Texas I live in Ft. Worth, TX area.
@curtismickey65245 жыл бұрын
Ugly Drum Smokers Texas I live in Ft. Worth, TX area.
@UglyDrumSmokersTexas5 жыл бұрын
Curtis Mickey two eight one seven three four one thousand .. text me
@curtismickey65245 жыл бұрын
Ugly Drum Smokers Texas yes sir. Will do.
@deerslayer4404 жыл бұрын
Do you use stainless bolts and what are all the paint colors on that drum?
@livefreeordie49552 жыл бұрын
Do you make and sell them?
@josepugas6435 жыл бұрын
Nice work man!Do you sell these? Need a new one mine finally burned out after a decade
@UglyDrumSmokersTexas5 жыл бұрын
Jose Pugas I’m in HOUSTON... where are you located
@josepugas6435 жыл бұрын
@@UglyDrumSmokersTexas im in chicago
@UglyDrumSmokersTexas5 жыл бұрын
Jose Pugas my main goal is to help others to build their own uds. There is just so much pride in building your own smoker. Chicago has some of the countries biggest drum manufacturers .. I can easily locate you a food safe Drum and give you my contact info.. I can walk you they the build easily. I do build for sale, but I do not ship. They’re too big and bulky, and I can’t guarantee what they would look like upon arrival.
@josepugas6435 жыл бұрын
@@UglyDrumSmokersTexas ok thanks so much man,i dont have much experience building which is why i just wanted to buy it,but you broke it down very well!Cook on man!
@UglyDrumSmokersTexas5 жыл бұрын
Jose Pugas I have a friend who builds in California. Joann.. with Cali Drum Smokers facebook.com/pages/category/Shopping---Retail/Cali-Drum-Smokers-1661035184203427/
@marcus24914 жыл бұрын
I hope you see this. How much does one of these go for price wise?
@UglyDrumSmokersTexas4 жыл бұрын
marcus I build a basic drum starting at around $400 it’s pretty much a Mr. potato head after that, just how nice do you want to look. If you order a kit from UdsParts.Com you can finish one out yourself for under $250
@stevenfontenot58933 жыл бұрын
I love how he didn't show how he cut those major intake holes.
@UglyDrumSmokersTexas3 жыл бұрын
I used a drill with a step bit., drilled three 3/4 inch holes
@djbigrodney6 жыл бұрын
I have been looking all over the internet for the paper towel holder and wind guard chain. Where did you find yours?
@ernrod474 жыл бұрын
How big are the holes. All of them.
@UglyDrumSmokersTexas4 жыл бұрын
Raul Rodriguez Here is the complete guidelines bbqsmokersupply.com/pdfs/UDS-DIY-KIT.pdf
@UglyDrumSmokersTexas4 жыл бұрын
Raul Rodriguez Quarter-inch for accessories and quarter-inch for accessories and grate bolts.. One and a half inch for the intakes and 2 inch for the exhaust
@ernrod474 жыл бұрын
Ugly Drum Smokers Texas thank you very much
@ernrod474 жыл бұрын
Ugly Drum Smokers Texas I’m sorry but the grate bolts I got won’t work. I think they sent me the wrong ones. And are the intake bolts Allen head.
@UglyDrumSmokersTexas4 жыл бұрын
Raul Rodriguez I don’t know why they send those screws.. I don’t use them when I order.. I use stainless steel 1/4 x 5/8 for accessories ....1/4 X 1-1/2 for grate bolts .. It’s the only thing I don’t like about the kit is the mounting hardware..
@marteicustaylor94856 жыл бұрын
How much is the dallas cowboys smoker already assembled?
@UglyDrumSmokersTexas6 жыл бұрын
marteicus taylor they run anywhere from $750 and up... that one in the video is $1100
@sardomnumspa4 жыл бұрын
What was that FINAL coat? Was it a clear coat or what? If it was a clear coat what was it?
@UglyDrumSmokersTexas4 жыл бұрын
sardomnumspa Automotive clear coat
@sardomnumspa4 жыл бұрын
Ugly Drum Smokers Texas Thanks so much for the reply! That can take the heat the smoker puts out? All the rest of the paint is engine paint.
@UglyDrumSmokersTexas4 жыл бұрын
sardomnumspa Through my experience, you don’t need high temp paint. You only need the high temp primer. After that you can use regular Walmart or Home Depot rustoleum paint at $3 a can
@sardomnumspa4 жыл бұрын
Ugly Drum Smokers Texas GET OUT OF HERE! Really?! Thank YOU! What about powder coating, if it is available in our area?
@UglyDrumSmokersTexas4 жыл бұрын
sardomnumspa that’s all I do now is regular powder coat.. not high heat
@El-Pollo-Loco6 жыл бұрын
You ship to nz? I want a uds but dont want to pay too much for one in store, and cos i can get the drums from my friend is a bee keeper
@dallaswilliamson52702 жыл бұрын
What kind of paint are you using?
@UglyDrumSmokersTexas2 жыл бұрын
Anodized Orange VHT
@dirtysouthangler69572 ай бұрын
Did you use a gloss with that orange paint
@ziggyr97465 жыл бұрын
What kind of paint did you use
@UglyDrumSmokersTexas5 жыл бұрын
Ziggy R VHT Anodized orange
@rickyguzman50946 жыл бұрын
Hi guys can i use a barrel that had spray foam insulation in it
@UglyDrumSmokersTexas6 жыл бұрын
Ricky Guzman probably has a liner inside, burn it out and what’s left you can use comet and steel wool to get the remaining liner out
@jameswatkins61004 жыл бұрын
What is the cost of a Cowboys drum?
@Titian926 жыл бұрын
Where can I buy the brackets for the casters?
@UglyDrumSmokersTexas6 жыл бұрын
Titan92 call The Metal Shop 281-353-2412 Mark Griggs
juang19g a guy here in Houston local. If your on Facebook join my group “Ugly Drum Smokers Texas” I’ll hook you two together
@Markspencer78085 жыл бұрын
Where did you get that paint??
@UglyDrumSmokersTexas5 жыл бұрын
Mark Spencer VHT high temp Anodized Orange from Autozone
@Markspencer78085 жыл бұрын
@@UglyDrumSmokersTexas Thanks!
@Markspencer78085 жыл бұрын
@@UglyDrumSmokersTexas looks awesome!
@p9raceway759 Жыл бұрын
UDS commercial or not ?
@raymondcarson90845 жыл бұрын
where did you get your 55gal drum?
@UglyDrumSmokersTexas5 жыл бұрын
raymond carson I buy my drums new in Conroe Texas at a place called sooner container
@danielc.11696 жыл бұрын
Do u sell thise smokers
@familygunsandrides....80245 жыл бұрын
What's the color called?
@UglyDrumSmokersTexas5 жыл бұрын
Manny Cortez Duplicolor Anodized Orange
@familygunsandrides....80245 жыл бұрын
I need one of those to match my ice chest.
@UglyDrumSmokersTexas5 жыл бұрын
Manny Cortez where do you live
@markgranados78366 жыл бұрын
I live in moreno valley California
@rolandmoreno35266 жыл бұрын
How much is custom drum?
@UglyDrumSmokersTexas6 жыл бұрын
Roland moreno I’m in North Houston, but I can help your I find a Builder in your area. Where are you from
@rolandmoreno35266 жыл бұрын
Aiken sc
@UglyDrumSmokersTexas6 жыл бұрын
Roland moreno I have a builder in Blufton/Hilton Head .. is that close
@rolandmoreno35266 жыл бұрын
Ugly Drum Smokers Texas yes
@johnpaull35946 жыл бұрын
Roland, I’m John Paull with Back Woods Drum Smokers. You
@rickyguzman50946 жыл бұрын
Its a tan color
@UglyDrumSmokersTexas6 жыл бұрын
Ricky Guzman okay, that’s a liner.. but its the easy liner... Buy your parts first. That way you can mock your drum up first. By doing that, the holes will help you to burn the drum out.. So, drill your holes, then burn a pallet or two in the drum to burn it out. After your done, any liner left should come out easy with Comet and steel wool, or just use a palm sander or wire wheel on your drill
@richardrucker155 жыл бұрын
What size bolts y'all using for the grate and the length
@UglyDrumSmokersTexas5 жыл бұрын
Richard Rucker for the grate bolts I use Stainless steel 1/4 inch 1-1/2 inch long
@richardrucker155 жыл бұрын
Thanks
@UglyDrumSmokersTexas5 жыл бұрын
Richard Rucker bbqsmokersupply.com/pdfs/UDS-DIY-KIT.pdf
@rickyguzman50946 жыл бұрын
Hey guys i got me a barrel but how do i know if it has a liner in it
@UglyDrumSmokersTexas6 жыл бұрын
Ricky Guzman what color is it .. Red or tan or metal looking
@normanham85664 жыл бұрын
I just got a food-grade drum from a honey maker. It’s in great shape. It is brick 🧱 red color inside. Is that a liner? Just looks like paint. Maybe a rust preventative? Your advice is greatly appreciated. Get it on! 👍🏼🔥😎
@Outdoor_Don6 жыл бұрын
The problem with these drums, you can’t easily add more charcoal mid cooking
@UglyDrumSmokersTexas6 жыл бұрын
donald ferdinand hi Donald.. actually the charcoal basket I use and comes with this kit, will run 26-30 hours at 225-250 while holding a large 15.8 lb bag of briquettes and wood for smoke. . So she truly runs steady the entire cook. Check on my channel for another video call “The Dark Horse” it’s where I installed a door. The door gives you three options in my opinion. 1: The basket burns so long, that you may want to change up your smoke profile on other meats and add a different flavor of wood. That would be a good reason to have a door. But just to have access to the fire basket itself, especially if there is a grease fire from poor maintenance.. 2: it allows you to add a lower grate and have access to cook meats on the lower shelf and have access .. 3. The door allows easy access to clean out the bottom of the drum. Now all that being said, 90% of the people who cook on a drum will tell you that a door is not needed. If your charcoal basket is loaded properly it will run 30 hours and you will never have to touch it. But like I said there are other advantages. So again check out my video and see what you think. Thanks for commenting and feel free to ask questions if you build your own.
@perrydavisharper87886 жыл бұрын
What type of paint is this? I can only find black high temp paint.
@UglyDrumSmokersTexas6 жыл бұрын
Perry Davis Harper that is Duplicolor High Temp Anodized Orange