UeeVii 5GHz PtP Outdoor Wireless Bridge Basic Setup

[@white66r]

I've got them paired and the web GUI for the master shows traffic. Should I be able to connect to the web GUI on the slave because I can't.

[@roccosarli6939]

Hi, I was wondering if there is a way to connect the bridge unit wirelessly from router to outside unit. Basically creating a totally wireless connection? Mt thought was not to have all the extra wire being installed from outside then into the buildings?

[@Knjukang]

hello Please Quick question: Can they work independent of each other? say i just wanna use one as a wifi booster and i want a relative 1km away to just capture my home wifi. will that work?

[@kenlee9798]

1. Does these units have a Web interface to monitor and set up these systems. If so can you post a web interface video? 2. Any way to reboot the units on a schedule or remotely like some engenius systems?

[@rally2444]

I'm trying to configure 4 of these 3 diffrent buildings

[@myusrngml]

so the sta[tion / slave ] device can be configured using the web admin UI to also operate a wifi access point vs having to plug a separate one into its lan ethernet port? does it support wifi 6 / 802.11ax and/or wifi 5 / 802.11ac and/or wifi 4 802.11n connections?

[@jab376]

How do you connect multiple computers to this system? Use More antennas?

[@Rickmakes]

You can connect an ethernet switch and/or wifi access point to the remote bridge.

[@danielhughes5949]

Good video and thank you. My router in the house is upstairs and near and window with direct line of site to my barn. Can I mount the master to the inside of my window frame? Again, it will be direct line of site to my barn and I would mount the slave externally. My house if log cabin and that white case would stand out like a sore thumb. TIA.

[@Rickmakes]

You can try it. Some windows have coatings that can block wifi. If you end up having to install it outside, you could paint it with non-metallic paint to camouflage it.

[@brauliosanchez3975]

Buenos días , quería saber las antenas las tengo sincronizadas pero al conectar a las cámaras funcionan normal en un determinado tiempo y por las noches se desconectan del DVR

[@gregsteinbeck9507]

Once I have my two routers setup and connect, do you have to configure anything on the UeeVii CPE58G? Any feedback would be appreciated. I am trying to connect my farm house to another building which is about 100' away. Please provide any information as to how I need to do this. Thank you Greg

[@Rickmakes]

It's not absolutely necessary to do any other configuration but it would be good practice to log in and change the default passwords.

[@forex-chart-analysis-daily]

15 km ptp wich device is best

[@everydayequine3983]

Do you know how we change our password? Admin is to short to be the password and I can’t do the ip log in

[@ltk20352]

66666666 it's eight 6's in a row

[@tommywray8109]

Nice job

[@Elfnetdesigns]

5.8G as in 5.8GHz, not 58G H - Host C - Client Also if you want to do a hotspot and be compatible with most devices you need to get a 2.4GHz version or have a separate dual band radio connected to the client and set up as an AP

[@ybeykoz]

who makes UeeVii? can we trust it? any data leak? what if it has those scripts or that small app runs that you don't know and sends your data to a 3rd party? so, how secure it this? asking to see if you have deep dive into security portion of it, watching the traffic thru 3rd party network traffic analyzer to see if it is trying to send any data to an unknown or unrecognized addresses.

[@bunnysnake1013]

You know who makes it *CHINA*

[@ltk20352]

In wifiman the company is called yunlink

[@jeradLiberty]

Mine wont pair🤬🤬🤬🤬