Ultimate DIY Sliding Table Part VI (The Finish)

  Рет қаралды 27,132

Tim S.

Tim S.

2 жыл бұрын

Hi all, here´s the last part of this series.

Пікірлер: 55
@aaronwilliams3899
@aaronwilliams3899 6 ай бұрын
Hey, I’m not much of a commenter buy what a great idea. I have been on a bit of a deep dive about sliding crosscut attachments. This is unbelievable. Great great job!!
@micheyy2010
@micheyy2010 2 ай бұрын
Чтобы удобнее было такую мелочь пилить. Да и безопаснее.. Сделай каретку для пилы.
@LariFariYoutube
@LariFariYoutube Жыл бұрын
Hi, Tim... For dangerios cuts like this one, you got injured, i tend to use the "good old" cross cut sled... Because then the offcut is not free to move and fly away.. So, even though i built myself a table saw with sliding table (video on my channel), i also built a "classic" crosscut sled for it... Stay safe, Buddy... Subscribed and greets from bavaria...
@ScottPelokDDS
@ScottPelokDDS 3 ай бұрын
Yes, a screw with shoulder
@chrispaul4072
@chrispaul4072 7 ай бұрын
Doing research now to make my own sliding sled and this is def my favorite one I have seen in last week! Def going to TRY and make one similar since my table saw in built into my work table on one end and miter saw is on the side on other end but Job well done!! Very impressed by your work on this sled!!
@Fusion_Woodworking
@Fusion_Woodworking 2 ай бұрын
Sliding table is one of the best features to a table saw if not the best.
@BuddyBakhuijsen
@BuddyBakhuijsen Жыл бұрын
OMG! I had some thoughts about using aluminium to build something like this. But man... You just improved my ideas big time. What a game changer! Very well done!!
@michael.schuler
@michael.schuler 9 ай бұрын
Excellent. Your design follows the geometry of various older Ulmia sliding table saws.
@tims.2832
@tims.2832 9 ай бұрын
You made my day: I did some research on Ulmia, reportedly they made good quality machinery (and hand tools) for aprox 100 years until they unfortunately had to stop their business in 2002. Nice, that some of the design elements I used are found on professional equipment.
@michael.schuler
@michael.schuler 9 ай бұрын
@@tims.2832 FYI: Google Ulmia Table Saw 1728. Key similarity: Use of diagonal 3D outrigger structure supported by upper and lower beams, in lieu of later developed articulating telescopic arm support common on modern sliders like Altendorf, Felder, SCM, et al.
@DamianDArienzo
@DamianDArienzo Ай бұрын
Dude, you are awesome. Well thought out!!
@wafflebeaver
@wafflebeaver 2 жыл бұрын
This is a great table saw sled! Its super high end for a Bosch table saw.
@engineerMike2999
@engineerMike2999 Жыл бұрын
I would recommend using a sacrificial wood block behind the cut piece and the mitre gauge to support the cut.
@mohammedalsamin2299
@mohammedalsamin2299 Жыл бұрын
That’s what I’m thinking to build, well done that’s great 👍👍👍
@michaelcampbell1471
@michaelcampbell1471 2 ай бұрын
Really awesome execution and explanations! Well done and Subscribed!
@psmaite
@psmaite 2 жыл бұрын
Best homemade sliding table saw in KZbin!!! do yo Sell the plans to make it?
@wh0tube
@wh0tube 3 ай бұрын
And suddenly I can dance! 😄👍👍
@MrJochenVienna
@MrJochenVienna Жыл бұрын
Da hast du dir was schönes zusammen gebastelt. Gratulation!
@joecnc3341
@joecnc3341 8 ай бұрын
Liked-Subscribed-Notified - Great video - Thank You for sharing! Vielen Dank!
@pakiki
@pakiki 2 жыл бұрын
Ui, Glück gehabt mir dem Unfall und gut, dass nichts weiter passiert ist! Ansonsten: Richtig gute Arbeit! Vielen lieben Dank für dieses tolle DIY.
@ryananthony4840
@ryananthony4840 Жыл бұрын
Great job man!
@alexsafonov7270
@alexsafonov7270 2 ай бұрын
yes, super cool 😎👍🏽
@peterjohnson4006
@peterjohnson4006 4 ай бұрын
very cool
@acerjuglans383
@acerjuglans383 Жыл бұрын
There is an inherent danger cutting any round rod type of material, since it's prone to rolling in any direction, once cut, even slightly sideways to the blade. I dont really have a good answer as to how you can avoid that, unless it's long enough that you can grab it away after being cut. Other than that, ill tell you that a high blade is actually safer than a low blade, because its basically clamping the object you're cutting straight down to the table. A low blade is skating along the bottom of your workpiece, and is very likely to kick it back at you. As always, a guard should be used over the blade to prevent injuries, no matter how high the blade is set. PS: I'm a journeymen cabinetmaker, not a weekend warrior.
@ReynosoJD
@ReynosoJD Жыл бұрын
This is very well done. Do you have a parts list that describes your parts and can you list in your comments where you purchased the items for your build. Again - excellent job.
@jiricabadaj8397
@jiricabadaj8397 Жыл бұрын
Luxus 👍👍👍👍
@erwinweil3976
@erwinweil3976 Жыл бұрын
Hi Tim, a real great video and a real great projekt. I Think to copy this sliding table 😜. can you give me a list of the material you have used, and where you've got it. thanks.
@pietpuck6456
@pietpuck6456 2 жыл бұрын
Hi tim, nice serie ! Saw all parts!! What a luck with your accident ! You can eliminate this by using a Saw Sled or Miter Gauge with Sacrificial Fence which extends the Saw Blade for 1 cm, so after being cut the Fence pushes it to a 45° position away from the Blade! Even than you can work with max Blade Height , but I don,t like to work with such exposed Blade Height, alllways risky!!! Greetings Piet!!
@tims.2832
@tims.2832 2 жыл бұрын
Hey Piet, thanks a lot.
@giovannimerighi7959
@giovannimerighi7959 Жыл бұрын
I'm really impressed by your sliding carriage!! Well done! Do you have plans for it?
@tims.2832
@tims.2832 Жыл бұрын
Hi, thx. Plans not made yet, perhaps a future project
@celticwoodworking8706
@celticwoodworking8706 2 жыл бұрын
On your flip stops, did you try a washer between the stop and the bracket? HDLP or similar., instead of the wood.
@tims.2832
@tims.2832 2 жыл бұрын
I‘m using industry grade technical plastics instead of wood, PE-UHMW SG 1.2 from Murtfeld, a German company for plastics in machinery construction. A normal steel washer might avoid galling, but it’s shape would not have worked well for me.
@alanrichardson7244
@alanrichardson7244 5 ай бұрын
Use a screw with a shoulder.
@spicystealth4285
@spicystealth4285 Жыл бұрын
Awesome just watched the whole series this morning looks and functions superbly How much was all the materials ( Ali extrusions , bolts , plate etc ) come to roughly
@tims.2832
@tims.2832 Жыл бұрын
Hey, thx. I bought a big package of aluminum profiles long ago, at the bay. In the meantime, the prices have risen. I think I will make a follow up video about prices today, the materials needed, about some improvements I have made in the meantime. Just today, I fixed the lock for the cross fence. Works like a charm 😁
@petrsedlar2893
@petrsedlar2893 5 ай бұрын
@@tims.2832 Hello Tim, any update on the video? :D It would help a lot (at least what materials to order etc).
@tims.2832
@tims.2832 5 ай бұрын
@@petrsedlar2893 Hey Petr, I bought at Steinbach AG Germany. Greetings from Bremen
@CHILIHASI
@CHILIHASI Жыл бұрын
Zum Unfall: Sieht das nur so aus, dass die Zähne des Sägeblattes einen negative Zahn-Stellung haben. Das würde darauf hinweisen, dass es ein Sägeblatt für eine Kappsäge ist und an der Kreissäge nicht verwendet werden sollte, eben wegen der Rückschlaggefahr.
@tims.2832
@tims.2832 Жыл бұрын
Müsste das Bosch expert for aluminum 254mm sein, für eine Kreissäge. Aber ich schaue sicherheitshalber nochmal genau nach. Danke.
@visualtech5687
@visualtech5687 2 жыл бұрын
Hello very nice work you have done here. do you have the building plans for this? want to build this one. thanks
@tims.2832
@tims.2832 2 жыл бұрын
Hey, thanks. Unfortunately I don’t have detailed plans so far. I finished it just recently and am glad it’s working so well. Perhaps I will make plans in the future.
@visualtech5687
@visualtech5687 2 жыл бұрын
@@tims.2832 you have a very nice project. it would be a shame not to share these. Think there will be a lot of interest in such building plans for which people will be willing to pay a contribution. I'm will be the first one 😀😍
@jacobmartinez3238
@jacobmartinez3238 2 жыл бұрын
Yes please make plans Tim! We are ready for pay for them 😃
@Greybeardmedic
@Greybeardmedic Жыл бұрын
No, the reason why the piece FLEW in your face is because you did support your piece all the way throughout the cut. A sacrificial piece of plywood, or even better: a crosscut sled. You already have a large sled in the form of your sliding table, but if you want to cut small pieces or small parts you may want a crosscut sled, a medium or small one should do. The primary cause of the incident was YOU, secondary items are the blade height and throatplate. I am sorry to be blunt, but table saw use and safety is my thing, and I hate it when people don't appreciate how to use them, and their dangers. BTW, your sliding table saw design is absolutely one of my favorite, and when I build mine, I will emulate your design most of all. Please keep going.
@lennartvolker8113
@lennartvolker8113 2 жыл бұрын
Ich würde da keine Klemmen benutzen. Mach bei den 30°, 45° etc einfach wieder solche Einschlagmuttern auf die Rückseite und eine Bohrung in das Profil und du kannst den Winkelanschlag anschrauben. Das dauert ja nicht lang und genug Längenanschläge hast du ja. Echt ein schönes Projekt von dir. Wird es dazu noch eine Materialliste und evtl. einen Bauplan geben?
@tims.2832
@tims.2832 2 жыл бұрын
Hi, danke für den Tip. Bauplan, mal sehen. Den habe ich bisher nicht, das lief ja mehr in Etappen ab. Wäre recht zeitaufwendig einen für Dritte gut lesbaren, fehlerfreien Plan zu machen. Aber vielleicht mache ich den noch, wenn es sich ergibt.
@BuddyBakhuijsen
@BuddyBakhuijsen Жыл бұрын
Maybe a bit cheeky, but how much would you charge if you build one for my DeWalt, everything aliuminium? And how can I get in contact with you for that?
@tims.2832
@tims.2832 Жыл бұрын
Hey, thanks ;-) Unfortunately, I´m pretty tied up in my job at the moment. But nice that you asked.
@BuddyBakhuijsen
@BuddyBakhuijsen Жыл бұрын
@Tim S. No worries! Thanks for the reply. 😀
@aprendendomarcenaria5226
@aprendendomarcenaria5226 2 жыл бұрын
Quanto fica pra manda uma dessa aqui pro Brasil
@tims.2832
@tims.2832 2 жыл бұрын
Muito obrigado. Mas infelizmente eu so tenho um deles.
@aprendendomarcenaria5226
@aprendendomarcenaria5226 2 жыл бұрын
@@tims.2832 não faria um pra mim eu pago dependendo do valor
@reaper060670
@reaper060670 Жыл бұрын
Cutting that piece of Aluminium that flew up and hit u should've been done on a small parts sled bro.. U actually need to support both sides of the cut. It's not rocket science mate.. Come on man u coulda killed yourself.. Be careful and use a small sled and clamp these things down
@ryananthony4840
@ryananthony4840 Жыл бұрын
Lol you have EVERY RIGHT to bragg after that build lol
Unleash your table saws crosscut potential! DIY sliding crosscut table saw upgrade
27:41
Barber's Paddock Woodworking
Рет қаралды 44 М.
Inside a Sliding Table Saw + Long-Term Review + Upgrades
26:44
Marius Hornberger
Рет қаралды 158 М.
Fast and Furious: New Zealand 🚗
00:29
How Ridiculous
Рет қаралды 40 МЛН
Double Stacked Pizza @Lionfield @ChefRush
00:33
albert_cancook
Рет қаралды 101 МЛН
Why Is He Unhappy…?
00:26
Alan Chikin Chow
Рет қаралды 38 МЛН
You Need To Make This Now || Ultimate Table Saw Upgrade
24:01
Bourbon Moth Woodworking
Рет қаралды 276 М.
DIY Sliding Crosscut Table. Ultimate Tablesaw Accessory
25:02
Make Something
Рет қаралды 771 М.
I Don't Get Why People Still Use These Joints
17:26
Lincoln St. Woodworks
Рет қаралды 633 М.
The Best Workbench Is Built Around You
19:51
Worst Workshop
Рет қаралды 68 М.
Here's How You Build A Router Sled
11:58
Learn Build Repeat
Рет қаралды 15 М.
Table Saw Accessories: Harvey Sliding Table!
4:58
CReeves Makes
Рет қаралды 60 М.
Making A Circular Saw Sliding Guide | Homemade Sliding Saw Very Easy
17:53
A smarter tool for small workshops
21:23
MWA Woodworks
Рет қаралды 233 М.
Why Doesn't Everyone Make These 5 Table Saw Upgrades?
12:00
731 Woodworks
Рет қаралды 614 М.
Проверил, как вам?
0:58
Коннор
Рет қаралды 106 М.
Looks very comfortable. #leddisplay #ledscreen #ledwall #eagerled
0:19
LED Screen Factory-EagerLED
Рет қаралды 6 МЛН
Копия iPhone с WildBerries
1:00
Wylsacom
Рет қаралды 8 МЛН
Лазер против камеры смартфона
1:01
Newtonlabs
Рет қаралды 734 М.
Что делать если в телефон попала вода?
0:17
Лена Тропоцел
Рет қаралды 3,1 МЛН