Dual Stiller Builds: Impact Shooting visits UR - Custom 6.5 Sherman, Carbon 6 & 22 Creed+Varminting!

Full Story: -
UR on RUMBLE: rumble.com/ult...
UR on Patreon: / ultimatereloader
Impact Shooting joined me all the way from South Africa to work on an incredible project! In this video we build 2 Stiller Action rifles. Join us as we chamber a new rifle on the brand-new Wombat action in 6.5 Sherman short, chambered in a Carbon 6 Barrel, and a .22 Creedmoor on the Stiller Predator. This was a great time with Piet Malan, and it got even better once we hit the mountain for some varminting! The rock chucks (and some squirrels) have overpopulated the area and we need to do some damage control. Check it out!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZbin channel (gavintoobe).
Any reloading data supplied on this KZbin channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this KZbin channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZbin channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZbin channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
Stiller
Berger Bullets
Colorado School of Trades
OTM Tactical
Precision Matthews
Hornady
Leupold
Wheeler
Foundation
Longshot
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereload...

[@glockparaastra]

What an amazing opportunity to have a custom rifle built!

[@HowManyLegsItHas]

Nice collab, watch both channels.

[@Ultimatereloader]

Thanks for watching both channels 👍

[@brucegillespie654]

Great seeing you guys together again.Love the gun build .Much overkill for those little critters lol .

[@edwardh1591]

Nice build and excellent machine work.😊

[@Ultimatereloader]

Thank you very much!

[@koosscholtz8266]

Two of my favourite you tubers together like the video and content keep it guys

[@smoakngun]

This is messing with my head. I'm watching my two favorite firearms youtubers in the same video. Twilight zone moment !!

[@Ultimatereloader]

Awesome, thanks for watching us!

[@wvlongshooter3912]

Mr Gaven, you need a pack for that heavy rifle. I have a Mystery Ranch Overload weapons backpack that carries a 26 pound rifle very well. It’s like you put the pack on with your shooting kit and 26 pound rig and you immediately think, where did the weight go. It’s a huge help. Great content as always, thank you!!!!

[@Muschka01]

Great format with two great channels

[@Big222Dog]

Great video guys, love the Wombat receiver. Nice to see you 2 guys team up.

[@MontanaWild78]

Great video! Pieter is awesome!

[@leonhart2452]

When I was a kid I hunted woodchucks here in upstate NY. With my 22-250 I got consistant hits out 350+ yards. Reading about rock chucks and hitting them to 500 yards. I found this unbelievable till I found out how big rockchucks are. An average rockchuck is 20 to 24 inches tall. Our woodchucks are 12 to 16 inches high.

[@bradpro4237]

I took a 7 sherman max to SA in 2021 with 150gr bulldozers at 3226fps, and it was a hammer. Took a follow-up shot at a gemsbok at 575yrs and turned his lights out.

[@fomerbu]

What a good time. Cool video

[@eskimoreloader]

Fun episode Gavin 👍

[@JwRainmaker]

You had the reamer and the Headspace gauges. What did you need the print for? Measure your shank length don't forget the lug. Thread it and sink the reamer till the go gauge just closes and no go dose not. Verify with tape on go gauge. Done. You can get closer with feel rather than trying to hit your numbers.

[@TheDiamonddave2]

Cool build!

[@cato7669]

That was a really cool video, thanks👏🙌

[@tw1st3dw1ll7]

I keep going back and forth on 6 creed or 22 creed next

[@Shoot_Reload_Repeat]

22 creed is amazing

[@douglasmaynor1420]

Ive been super interested in doing a sherman cartridge!

[@mikerochburhns.102]

Have you collected these machines over the years like most gunsmith’s do or did you strait up drop a single family home on brand new machines?

[@NiteWorXTV]

Great vid guys

[@StuninRub]

You might as well go with a lightweight AR15 in a 6mm catridge for small critter like these.

[@mikerochburhns.102]

Gay. A true custom build vs a Lego gun made of aluminum and plastic?

[@StuninRub]

@mikerochburhns.102 Plastic? There are AR15s that shoot more accurately than these low-end "custom" bolt guns. If anything, there pre-fit bolt guns are just as much lego guns as ar15s.

[@mikerochburhns.102]

@@StuninRub you must not have watched this video. 23 Oz action, 26 Oz chassis. 2.8 lbs on the barrel. There was nothing low end about this custom build. Including the tooling and work he put into this, going as far as getting reamer dimensions to insure it head spaced perfectly. Shooting under half moa. This isn’t low end, and even a properly lapped and headspaced Howa 1500 will outperform majority of ar15s on the market, even the “high end” aluminum and plastic ar15s.

[@StuninRub]

@@mikerochburhns.102 LMAO, you think this is highend? This is entry level.

[@WillardGrant]

Can you do a winchester model 70 action

[@sethperry1323]

Do a short barrel 6mm-204 or 6x6.8 next! 55gr noslers over 3500fps! With less powder an muzzle blast than the beloved 22-250 😊

[@Dave-cf2ng]

@@sethperry1323 you should buy a custom rifle from him and have him waste the time to chamber the barrel in one of those cartridges.

[@sethperry1323]

@@Dave-cf2ng 😂😂😂🙊🤡

[@Dave-cf2ng]

With Sherman wildcats being sold I am steering clear. The pressure issues are another story,

[@chadperry4021]

Please elaborate, I’ve not heard anything negative about them but I’m skeptical. Especially since they claim their 300 magnum is 150To 200 fps faster than a 300 prc with virtually the same case dimensions.

[@Dave-cf2ng]

@@chadperry4021 just look it up. They are pretty much pushing brass way beyond its capabilities. I am an avid reloader and have a few wildcats and many AI chambers. I know of many people who will no longer chamber barrels in Sherman’s because of the pressure issues and liability behind it.

[@marcmoore4115]

​@@chadperry4021 it's because it's significantly higher pressure. Run it through Gordins Reloading Tool to the same Pressures and it's barely faster. Obviously, this isnt load data to be used, but it's a good example of what to expect. Running 225gr ELD-M and N570 with 3.800" COAL, 28" barrel: .300 PRC - 81.5gr - 2850fps - 62883psi. .30 SM - 83.0gr - 2872fps - 63890psi. Barrel life is also slightly shorter. If yiu want to get that 200-300fps advantage, you'll be running over 70k psi, which is way higher pressure and eats the barrel life :/ I wanted a .30 SM but after the research I've done that lead me to GRT and looking at pressures, I realised that the velocity comes from running really high pressures.

[@timothyletkeman]

There’s no magic. Sherman cartridges lower case capacity and run the same or higher velocities of other short magnums. The difference is obvious. They run them extremely hot.

[@chadperry4021]

@@marcmoore4115 thanks for the reply I looked at them for a bit and just decided to stick closer to the ground

[@kurtjensen7930]

I enjoyed that video!

[@luckyshotammunitiongunsllc2369]

Great video

[@patrick6087]

What velocities are you guys getting from the 156 Berger with the Sherman

[@Ultimatereloader]

3050

[@johnseptien3138]

Coincidental but i just built myself a 6 Creedmoor on a Stiller Elite action, Proof barrel, Trigger Tech trigger on a Woox Wildman stock. Dont think you can post images here.

[@daltonrush7668]

I’m a big fan of 6 creed. Kind of a nice do all cartridge for my needs

[@Ultimatereloader]

Nice!

[@justincaseholsters7649]

What scope is that he is running. It looks like a gen 3 Razor but its all black.

[@jdpenterprises1]

Europtic has an exclusive black version.

[@rustynut1967]

Do you have any idea how the new Stiller actions compare to when they were made in Wylie, TX? I have a Tac 30 AW of that era, and was considering using a Stiller again for a new build. Love the Tac 30 BTW.

[@carlLackey-qk8sd]

Please let us know how that 22cm wombat in the HNT 26 goes. I ordered one from Horizon 9 months ago and they still cant get it to shoot right. Something about the lug and lug pocket not working together. WIll be nice when/if i get it. Wombat action, 18'' proof cf barrel, HNT26 chassis. 5lb, 3oz with no scope.

[@Devanzo321]

What ball heads were you using on your tripods

[@mj23polairs]

When’s Pieter going to just move to the US

[@johnseptien3138]

There is no way you would get a South African from Capetown to move to the US and why would they. It is gorgeous there and you can hunt from the east cape to the north in the Limpopo River area on the border of Zimbabwe and Botswana and everything in-between.

[@Deerslayer1912]

I need a black Gen 3 razor…

[@FranciscoGarcia-ni9eg]

6.5 Sherman, how difficult is it to find brass and rimmer?

[@jsshuntr1257]

Shooting begins at 12:00 - 14:10 mins. You're welcome in advance.

[@Ultimatereloader]

Yeah, if you click on a video with "Builds" in the title, and don't want to watch the builds, then this. :)

[@peterwhite7252]

Are rock chuks a pest or do you just shoot them for fun.

[@Ultimatereloader]

Yes - they are pests

[@jmf1976jmf]

I shoot for both reasons.

[@PassionforRifles]

🔥🔥🇺🇲🔥🔥

[@anthonyrstrawbridge]

Die groot aardse harige geel pensmarmot smaak soos dossie