All About Chambering Reamers with Fred Zeglin

[@peterparsons7141]

What is astounding is looking at the number of people interested in these things. This information used to be magic. You had to go and talk to the old grizzled German gunsmith and depending of his mood that day you may get information, if you were lucky. Today with the shared wealth of information on the web the shooting sports are going to new levels and it’s fantastic. Terrific video.

[@jpippin1949]

This is so true...love it !

[@612minigun]

This is exactly the type of video I cannot get enough of.

[@Ultimatereloader]

Thank you!!!

[@davidserpa7828]

Thanks for all you do for our community. Sharing knowledge is a good thing!!

[@montanaspring7176]

WOW! im 21mins into this. Amazing collaboration. Great idea Gavin making a video with Mr. Zeglin.

[@A.R.American1]

I have personally rented dreamers a few times over the years from fred / 4d reamer rentals. Always been great to deal with a top notch company to deal with always a pleasure.

[@oldschooljack3479]

Thank you for this. I appreciated learning a little more... And it was a trip back to my machining days.

[@heartobefelt]

You mentioned "those who do flushing during reaming" you should all be either flushing with coolant from the front of the barrel or at minimum use compressed air at around 25 - 40 PSI . any milling job can be ruined with swarf scoring your surface.

[@PencilProper]

Yeah I also thought this and was confused. Chambering is critical.

[@MichaelRandall-f1o]

As a machinist and a back yard gunsmith we use to put rubber bands tight around the boring bar or reamer to help with chatter. Heavy weight oil for reaming also. On the mill and lathe to ream on size or under size holes Heavy oil slowest speed, in and out with hand speed on the feed rate. Get it in, get it out no dwell. The amount that is being taken out varies the finish also. Normal reaming stock amount .007 - .015. For chamber reamers going from standard to AI chambers heavy oil worked good for me. I was a machinist 29 years. Gunsmithing 23 years. Using a finish reamer gave me the best results. Hope this gave insight on reaming.

[@misterlewgee8874]

That hour went by quickly. Pleasant informative viewing. Good to know as general knowledge..the terms and concepts.. Having a barrel made soon and hopefully a matching body die. I'm wondering about providing cases and pills to help set the headspace and throat depth...as I like option to seat near the lans, and hope to avoid working my brass...or overworking..etc.. Maybe I might hope for a tighter neck, shorter throat and similar Headspace to shoulder. Without driving gunsmith bezerk...ha

[@jamesmooney5348]

Great video Gavin! Thanks to both of you.

[@jonathanpeyton6546]

Awesome video, thanks for sharing that wealth of knowledge. I've learned a lot from you since purchasing my first bolt action back in 2020 and continue to do so. I appreciate the effort you put into getting knowledge out to people.

[@colinarmstrong1892]

I am looking at getting reamers from ARC and this video was very informative thank you

[@the1andonlySherlock]

Gavin, I recently ordered a .220 Russian chamber reamer and will be having an AR (specifically a PSA KS-47) built in that caliber. I think it's an interesting caliber and would love to see a video on it since there's not much available on it.

[@eloiseharbeson2483]

Is that the 5.6x39mm that is based on the 7.62x39 case and is the cartridge that 6.5 Grendel is developed from?

[@the1andonlySherlock]

@@eloiseharbeson2483 Yes, it is 7.62x39 necked down to .22 cal. Its a popular starting case for a variety of other cartridges, such as 6.5 Grendel, 6mm ARC, 6 PPC, 22 PPC, and 20 PPC. The notable thing in contrast to those cartridges though is that it retains the same case taper as 7.62x39, whereas all those other ones are much straighter.

[@sydurgraham7760]

@@the1andonlySherlock I'm assuming you're going to have to make your own ammo for that? How do you plan on necking down the 7.62s? Just interested to learn as a reloader

[@the1andonlySherlock]

@@sydurgraham7760 since it's a popular starting point for a lot of other cartridges, Lapua makes bras for it. In fact, Lapua doesn't make brass for the PPC cartridges because people prefer to form their own from .220 Russian.

[@randomidiot8142]

​@@the1andonlySherlock Lapua used to make brass for it, but they have dropped it from their most recent catalog along with a few others.

[@MrRayray81]

Great video. 4 D reamers is a great company to do business with. I wish the different coatings available to reamers would of been discussed

[@rosswitte]

Thank you so much for doing these videos.

[@KingLoopie1]

Good info here! I didn't know about the patch or wax paper tricks... Thanks! 👍

[@unclebob540i3]

What a fantastic deep dive geek out session!

[@WarrenBeard-Gunsmith]

EXTREMELY helpful information!!! Thank you!!!

[@kevinroberson1985]

Pacific tool and die company and they have great chamber reamers since back before WW2 and lots of other precision tools . I have ordered a lot of chamber reamers for them in different calibers and all were perfect to me. And they said if I had any kind of problem they would get professional help for me and if I needed gauges for my lathes or milling machine that would set me up with a technician that knows a lot about it and for the type of machine I'm useing . I have even got full barrel reamer that cut so precise and smooth I was totally scary with the results it was almost like the barrel was polished and was ready for rifleing and they sent me a lot of information on useing the tool for the best turn out. I used there reamer for full barrel ream and I have button rifle a muzzle loader rifle barrel with a one in 36 twist rate and I'm hitting targets with a .410 dia one inch across flat's 42 inch long barrel. Useing paper patch boolits and hitting a 12 inche steel at 400 yards using 100 GR. Weight by digital scale and not by volume. Because volume is not accurate. I took my no.11 percussion nipple out and change it with a 209 conversion nipple I purchased from Cabela's for 30 something dollars and it has a built in fireing pin and a rubber o ring seal and I have never had it to fail no matter how much rain came down. I had to trim bottom skirt off of the hammer but did it so you would never know it was even on there. Flip up Sharpe's back sight with peep and a Lyman aperture front sight with level bubble and adjustable left and right front sight for fine tuning and up or down front sight screw up or down. I think I have a one of a kind double set triggers Pennsylvania Lancaster long rifle and I use a fiber glass electric fence rod that's black and has brass tips for cleaning and pushing bullets down the barrel firmly. I found a cheap none breakable ram rod that fits perfectly in my barrel and piping .

[@darrellblanchard2362]

I would definitely recommend 4D . I have rented reamers and the rifles I chambered with his reamers shot 1/2 minute or less😊❤

[@randomidiot8142]

On the large case high cutting resistance thing, I have seen a couple people mention that high taper long cartridges like 300 hh are the worst when it comes to testing their gunsmithing skills. The entire reamer is taking a decent chipload versus a minimal tapered reamer cutting mostly shoulder and minimally on the body. Steady chambering and heavily tapered reamers seem to be a recipe for chatter and difficulty.

[@huntmulies39]

Great video thank you. Question: why when I look to order a throat reamer it doesn’t list a lead angle?

[@randomidiot8142]

Next step, best practices on cartridge design? Body taper per inch, clearances, etc.

[@sabercruiser.7053]

This is gold thank you 👍👍👏👏

[@relleknoj]

Thank you.

[@robertprice4286]

This was extremely helpful, thanks!😊

[@josefigueroa4583]

Awesome video, keep those coming!!!!!

[@anthonydavinci7985]

Great Show... What is difference in Roy Weatherby chambers , compared to Sami.. Are Ackley improved chamberings really worth the effort..What are your thoughts about 8mm x57 mauser to 8mm 06 ? Thanks Great Show .

[@mannequinfukr]

If I read it correctly. Weatherby chambers have a lot of free bore

[@georgelza]

awesome awesome... been looking for exactly this, thanks guys.

[@ironDsteele]

I want to see the chamber reamer for the 140mm M777 towed howitzer.

[@yellowjacket548]

Great content as always.

[@juliogonzales9217]

Great stuff. Thank you

[@TXPhred1]

Would like to see what a “finished” chamber should look like.

[@trevorkolmatycki4042]

I’m shocked at the lifespan of the reamers… I was guessing what maybe you could get 10 chamberings?… when you said you can cut 60-100 times I was flabbergasted… makes sense that they are a rental item. Cheers!

[@hulksmash6476]

For reamer runout would it not be best to clock (dti) the reamer shank or pilot (I think preferably the solid) before going in for cut?

[@jasonrad9332]

Really awesome information!

[@r68dvr]

wow, great content

[@robinj.9329]

At gun shows and in the collections of friends, I've see some beautiful bolt-actions chambered for the .300 Savage. Alas, the only way to get a "New" rifle like this is to have it made special. And not a whole lot of Smiths seem to be very familiar with this cartridge or the guns that use it. So, I'd like to buy a reamer for the .300 Savage just to be able to loan it out to a gunsmith when I've decided on exactly how I want my rifle made.

[@eloiseharbeson2483]

I wonder how many .303 British chambers have been reamed out to 7.62x54r? I know of several. Ruins the brass, but otherwise seems pretty satisfactory.

[@waynehendrix4806]

Thanks for the great talk. Any carbide reamer for SST barrels considered? I know that carbide over prehard was always very hot, but fast work. Blue chips. Hope I'm not mixing metaphors.

[@ronowen6533]

Excellent

[@chrisjarvis4449]

so what can you tell us about red Elliott reamer maker that was in Ramona , ca. ?

[@Coreazcool]

I need to take just a hair out of the chamber since my .308 'go-gauge' doesn't fit. I have a precision background with hand reaming.... can I use one of these tools to take a few thousands by hand?

[@Jonnydeerhunter]

I need a custom reamer for a straight walled wildcat I'm working on. Does anyone have a suggestion on where I can get a reamer made?

[@stevekruske5441]

Manson reamers

[@Jonnydeerhunter]

@@stevekruske5441 Thank you

[@henryvandervort9891]

Have a savage hb 223 bolt action. Can it be reamed to a chamber to handle a 556 cartridge ?

[@beenstork]

I keep seeing the Van Halen gun in the background of your videos. Are you going to do anymore videos with it? Is there some kind of competition you want to shoot with it, like F class or something?

[@50-110nut]

I have a single shot 45-70 what reamer would I need to re-chamber it to 45-90 I am good. I do it by hand I don’t have a late

[@محمودحسن-ه5ه7ل]

وين بدنا نلاقي متل هدول

[@titusdrake-bw9ws]

can you do a video on the Lee Six Pack Pro?

[@kitbruttig1995]

Can you ream a 223 chamber and make a 223 Wylde Chamber in a bolt action sporting rifle in order to accept both 223 and 5.56 ammo and maintain at least MOA ACCURACY?

[@50-110nut]

Can I re-chamber by hand I do not have a lay

[@SigmaBallistics]

19:01 *laughs in 6.5 creedmoor*

[@imhigh0013]

I'm just checking in for all the chamber reamer jokes....

[@allankrogh6707]

hi super good video. would it be possible to convert a 357 magnum so that you shot with a norma 22 bullet. could be fun to shoot with in my bergara b-14 as a little training ammunition.

[@CrashRacknShoot]

If ya got enough money, I'm sure it's possible lol

[@dslade353]

I recently bought a Tokar brand reamer in 9.3x62. They are apparently made in Ukraine. Quality was not what I'm used to. Have you seen these reamers?

[@conradhermann1918]

Is there a reamer to make a 22-250 into a Ackley imp.?

[@jimklemens5018]

Most reamer manufacturers have 22-250 Ackley Improved reamers in stock.

[@biakmawiab.pachuau5924]

Interesting, chambering barrel

[@Bhartrampf]

Where is a good place to send reamers out to.get them resharpened or reshaped.

[@Saintsfan1977]

Jsg I think does them

[@Bhartrampf]

@@Saintsfan1977 thanks, I'll.check with them.

[@Saintsfan1977]

@@Bhartrampf JGS and Manson from what I see both do it.

[@jimklemens5018]

I would buy a new one.

[@lukewadsworth4533]

Arc ballistic in United Kingdom are good reamer makers

[@hamzalag2006]

What's mean the Sammy diagram ? Please

[@brandonlittle6444]

Geometery = I dont know what I am taking about

[@totaldla]

Should've broke this into a series of 5 minute videos. 1 hour is just too long for a guy who wants to lengthen the throat on his 45acp so he can shoot WFN.

[@andrechiodi2768]

Tem essas ferramentas pra 12 ga calibres gauge?

[@kuronyan3006Ackley]

🤩👍‼️

[@kansasboi8742]

why is it i can buy a strate wall reamer and and a drill bit for under 6$ ech that are just as price a camber reamer but a camber reamer can go any were from 60$ to 280$ i and also get made to spec rifling button from china that work grate with lub like all buttons do

[@SkyShupe]

A lot of things wrong about the machining in this video. Straight flute does not extract chips faster

[@Mooseracks]

I know a guy who tried this and blew up his rifle

[@hwsinhocsignovinces75]

Looonngggg loonnggg video...

[@kcstott]

Oh my God FGuffy is screaming at the screen if he's was watching.. Oh wait no, it would be a mile long post about how wrong you are and ammo doesn't have headspace.

[@fvccfirearmstechnologiespr821]

Tolleraces. See SAAMI drawings.

[@CrashRacknShoot]

Who tf is fguffy?

[@kcstott]

@@CrashRacknShoot You're a lucky person to have never run into him on the various reloading boards. He's an internet troll that claims to know more than anyone about reloading yet fails to teach anyone anything. He's been kicked off more boards then i care to count.

[@CrashRacknShoot]

@@kcstott lol to be fair I've only recently got into reloading in the past couple months. I'm sure I'll have the pleasure in time.

[@gristlepounder]

😆

[@bretnmannn]

Barrel quality is #1 fact ie bartlien, kreiger etc. If chambering was you could take all of the 3,-2,-5 moa junk factory and milsurp rifle and rechamber them into a sub moa??? You can't, precision rechambering is nothing when used on junk non stressed relived non uniform bore barrel!

[@jrhunt414]

Why not just EDM the chamber.

[@beenstork]

I don’t think that’s possible. Doesn’t EDM require the wire to go all the way through the material it’s cutting? I don’t really know much about EDM but from what I do know, this seems impossible

[@jrhunt414]

@@beenstork Not wire EDM. You would machine an electrode and push it into the barrel to make a chamber.

[@ronniemonday]

Cost and practicality.

[@jimklemens5018]

It isn't possible.

[@jrhunt414]

@@jimklemens5018 definitely possible, I have some EDM chambers. Why do you believe it’s not possible? Definitely not possible if you don’t have an EDM in your shop.

[@hunter5858]

Hey Fred the reamer man how's Kalispell been treating you

[@hunter5858]

Shot with fred in Kalispell Mt