Unbox and Assembly FITNESS REALITY 810XLT Super Max Power Rack Cage

Do not forget to click "like" & "subscribe", share to your contacts and stay connected via our different networks.
www.TeamKebec.com
/ teamkebec
/ teamkebec

[@bearforce187]

Thanks for sharing, will use this when I get my power rack someday.

[@keyes1024]

Great video, showed how easy it can be to set up.

[@mr.whatsonyourfeet2292]

Man U really came through. After/while watching your video. Putting my power rack together was a piece of cake. Thank you!!!

[@mjharon]

One of the best assembly videos I've seen. Thanks!

[@greg6107]

Thank you kind sir ! Made it a breeze

[@utb15281]

Do I need any other tools besides the rubber mallet and an adjustable wrench? Thanks

[@monariani5689]

Thanks for putting this video up! Great job :) Can you please tell us what tool(s) and size did you use to tighten it all together at the end?

[@lolok3549]

Lol it comes with tools

[@Shadybiz1]

@@lolok3549 Comes with tools, but to make the job far less of a PITA, an Amazon review suggested using a 17mm socket, as well as a 17mm wrench for opposing force. Late reply, but just FYI for anyone looking at this video in the future.

[@joshua4226]

@@Shadybiz1 thanks man! I’m that person in the future lol

[@Nohname]

Nice edit

[@mariostone5501]

What's the length of your Olympic barbell

[@kamalbalasubramanian621]

How long did it take from start to finish ?

[@leof.883]

Hey man My screws are loose even after tightening the lock nuts, is it supposed to be like this?? I’m thinking the screws are too long for the posts

[@schoolboy405]

Did you figure it out

[@leof.883]

@@schoolboy405 I did, I just had to grab both tools that you get and tighten the bolts

[@schoolboy405]

@@leof.883 simultaneously?

[@leof.883]

@@schoolboy405 you can hold the nut still on one side, and then tighten from the other side

[@asphaltking3452]

hey man, im having the same issue, and I can't get one side to stay still while tightening it , how did you get it done

[@Dylan_Shaw]

Not too sure if you'll see this, but the U-Bracket on the bottom, this can slide around a little correct? Thank you! Great video btw!

[@ZedBanana8]

yup, it can

[@AS-ug2vq]

What's the size of the bolts?

[@sarahton1n]

How long did this take to assemble?

With help it can be done in 1-2 hours I think.

[@collegeguy799]

If I wanted to buy this and then move some time later in the future can it be taken down?

Yes

[@NoahsArk4532]

Does anyone else have the issue of their “Foot End Cap” not fitting into the hole? Mine look bent and I can’t get them in, do they really matter that much or can I just leave them out?

[@IYURKAJ]

I stuck the wrench between the foot end where it’s tight and then forced it on seemed to work fine, might make a difference as metal is slippery on ground

[@FreeStockPromotions]

The price for this model got jacked up.

[@danp8309]

@giveittostella Yea, it did. It took a while, but I found the rack and bench combo for $200. Thought that was a great deal so I picked it up while I could.

[@keyes1024]

I recently found it being sold by amazon for $230, and I jumped on it. "good price" for the pandemic. added the lat attachment for $250.

[@joeschmoe32electricboogalo99]

Just bought it for less than 300$ but the pulley assembly is another 250$