UnBoxing and assembling a special item for the channel.

[@Thunderst0rn]

Love the way Adam and you distributed the explanations, nice and detailed assembly for the tech lovers here and application without too much detail about construction for people who like the firewood stuff. And for the people who like both, including myself, just watch both :) Keep up the great work! Improving it with an extra latch or a pin just to lock it in place will definitely improve safety. Another idea would be to add some dampening or to replace one or both (depending on the amount of force required) of the gas cylinders with a linear actuator. In the latter case, you might want to use a force arm

[@jimwiskus8862]

My hats off to Metsa for getting these trailers to you & Adam. I obviously haven’t seen Adams, but if it’s anything like yours, home-run! That was an excellent video, teaching how to keep from making mistakes, ask me how I know. I am right with you on making a bracket of some sort to keep from accidentally tripping the dump lever. See you in the next installment.

[@foreverbrownsfan]

We could all see that secondary latch coming from a mile away.😮 Great idea Doug.💡

[@maruiacancer]

Thank yoou so much for your viideos! I had a misfortune, I was diagnosed with ovarian cancer. I also created a channel and am trying to move in that direction, but so far not very successful((lu

[@JeffGeorgalas]

Now THIS video, with your idea of making a secondary safety latch for the trailer so that it won't accidentally open is one of your really good ideas!

[@OneEyeCustoms]

Thank you, stay tuned for the next video

[@outdoorswithlarryrobin]

Nice trailer Doug, Take Care 🪵🚜👍🏼🇺🇸

[@echovictorsix]

Thanks for the video Doug. A very interesting trailer that would work well here on the homestead. What concerns me, and I'm hoping you can show in future video, is how difficult it is to manually lift the dump bed with a heavy load (rated 3300lb max). With the pivot point that far rearward, even with the powerful struts, I have to imagine you're having to apply a good bit of grunt force to lift. They do offer a hydraulic assist version, but it's significantly more expensive. So if you could show, with say a full heaping load of soil, how much effort is required to lift, I'd be grateful. Ready to pull the trigger with positive results. Thanks again! Paul in Central Texas

[@oakrunacres2564]

Safety first! Always thinking Doug. Nice work. Dave

[@carlfondelheitiii2742]

Doug, very nice new tool. Great video on the assembly. I do Bet you will find some of the ((One Eye Custom add on's ))very soon. We will be looking forward to see the Custom videos as well. Carl FONDEROSA FARMS MD

[@caveweta]

Like the safety aspect of this video. I think I’d put a clamp or mole grips on that toggle release full time. In its designed state that’s an accident waiting to happen.

[@robertsnyder5193]

A simple safety chain for the latch might be the solution. Blessings brother

[@Tdale85]

Great, detailed video Doug. The strut demonstration really shows the power of those things, quite the danger situation when I installing that part and flipping over the trailer. The safety pin/latch addition will be a good customization. If I may suggest, as I’m sure others have, a wireless clip on microphone will help these videos a lot. The volume difference gets a bit frustrating when you are up close and far away in the video.

[@b1air77]

Can’t wait to see what customizations these bad boys get over the coming months!!

[@JCWren]

7:55 Kind of surprised they used fully threaded bolts instead of shouldered bolts. Also interesting that the valve stems on your wheels don't have shrouds, while Adam's does.

[@donalddavis3308]

Very detailed assembly instructions and tips. Great looking piece of equipment, looking forward to seeing it in use. The tip about hair spray took me back many years to the motocross days of my life. We used hair spray to secure our hand grips. Great filming.

[@user-scooter1965]

Very nice assembly video. Also great idea with secondary latch. It looks like a very well thought out design.

[@ronniehoward6601]

Looks like that trailer will be really handy. I can't wait to see how you make it better.

[@markknister6272]

Absolutely knew you would make a change (or two). Good safety tips.

[@williamfenner9915]

I agree with you on the safety latch that you have a remove between dumping.

[@HometownAcres]

Lol the zoom in on knocking over the broom.

[@OneEyeCustoms]

YOU WATCH!!!! 😁

[@AdamsMom921]

@@OneEyeCustoms I did too!!! LOL!

[@OneEyeCustoms]

@@AdamsMom921 haha, thank you!

[@greatnorthern706]

Really enjoyed this video. You are chock full of interesting tips and tricks Doug.

[@OneEyeCustoms]

Thank you!

[@Ultratec]

Greetings from Finland. Great video. Very good tips for safe use of the trailer.

[@OneEyeCustoms]

Thank you and thanks for a great trailer!!

[@SpicerDesignsLLC]

That thing is pretty nice. Im curious to see how you customize it.

[@OneEyeCustoms]

Already in the works!!

[@gebada7655]

Doug great looking trailer. I just watched Adam’s video and it is really nice to see the differences. I really enjoy the little tips you have during assembly. Never knew about the hairspray trick. Cheers

[@russellanderson3901]

The hairspray trick is similar to how golf club grips are put in but they use double sided tape.

[@mikefromwv1010]

Thanks for sharing very good details

[@uoobwatcher]

That company should pay you as a safety consultant. It’s something that could save the company money.

[@DDL2728]

That's a very nice trailer, Doug! I'm sure you'll have lots of uses for it. God bless you and your family! 👍🙏❤️

[@m9ovich785]

That explains why Adams weas Delivered to Your Place, I saw His Video 1st LOL. Thanks Doug. Mike M.

[@wesleyhuckabay5968]

Very good video on the installation. You make it look so easy. Keep those videos coming Doug.

[@PapaRug.58]

Those are a slick trailer for quad/sxs or utility tractor

[@davehenderson47240]

Quick safety might be a little chain loop and a carabineer to somewhere on the bed.

[@woodintheblood4104]

I would say don't worry about a second latch. Instead get used to keeping the bed in the up position. No worry about accidental release and any rain or other liquid will auto drain out the back. Just my thoughts. Nice trailer!!

[@karlk5691]

If you store the trailer outside you could just leave it upright so the latch won't get hit. Lover you videos

[@OneEyeCustoms]

Great idea!!!! Thanks

[@carlgrayman7663]

Nice tip on the hair spray.

[@danielbowser130]

Another great video.

[@MetsaMachines]

Love the video and the ideas, will pass these along to Ultratec. Looking forward to seeing what else you do with it!

[@OneEyeCustoms]

Already on my mind.

[@wazzeradk9398]

Looks like something Doug would have designed! Very nice!

[@petenelson8136]

Very detailed video ... as usual. I can't wait to see the modifications you make on this to make it better. A great reason Metsa sent them to you as you seem to improve everything you use.

[@jasongall6132]

Great video Doug thank you.

[@Quadrille763]

Working smart

[@dirkkelly9596]

Nice unit 👍👍

[@rirebel6029]

I was all excited to see it working !!! 😅

[@OneEyeCustoms]

It will be in the next video! Stay tuned

[@rirebel6029]

@@OneEyeCustoms great videos and you got some awesome toys man!

[@OneEyeCustoms]

@@rirebel6029 thank you

[@awstott]

That looks like a pretty awesome trailer. Doesn't look like we have a dealer up here in Canada though. I just got a four wheeler and was thinking a trailer like this would be super handy for those yard chores

[@OneEyeCustoms]

Get a hold of Bob at Metsa Machines and see what he can do. Also stay tuned for my next video, it may convince you to get one. MetsaMachines.com

[@brucebello2049]

Well documented advice Dough, excellent job!

[@davidhill4711]

Great assembly video. Especially the danger of the latches.

[@henrymorgan3982]

Cool!

[@buildlife]

Those are nice trailers. I have an older wagon thats really similar but it doesn't have struts to help dump. I wonder how much easier that is to dump with a load in it!

[@OneEyeCustoms]

Very easy! I have another video coming soon on it.

[@outdoorswithandy732]

That looks like an awesome trailer, maybe one day I'll do a comparison to my Bannon trailer

[@jamesford9917]

Yes that’s the earth mover one that’s the one I’ll be ordering

[@OneEyeCustoms]

Stay tuned for the next video.

[@newhampshire-bob1604]

Interesting looking trailer! Be interesting to see how it does with a heavy load!

[@Riverguide33]

A terrific “unboxing” and assembly, Doug. While it’s a great looking trailer, there are definitely a few areas that could use your practical touch….especially on the dangerous latch release. 👍

[@OneEyeCustoms]

Stay tuned for the next video on it.

[@richardbrowne1679]

Great video Doug- I have the same trailer. There great. I also have the Timber trailer setup.

[@tkskagen]

Not to mention Doug, but keeping the Manufacturers' "Zerk Fitting" caps will also keep debris from potentially clogging the spring-pressurised ball of the fitting as well as looking cleaner! For the rear strut Mounts, may I suggest a washer and maybe threading a ¼-20 bolt in there with a Nylock nut? (As I do not know the diameter of the hole, or a split pin?

[@OneEyeCustoms]

I switched it to cotter pins. They work perfect!

[@lewisjohnson2732]

New wood carrier

[@bobart1790]

Nice dump trailers.

[@mark02tj41]

This was a GREAT video! Even though I'll never have a trailer like this, I watched the whole thing. Loved the way you explained the how's and why's of putting that together. Curious what tire inflator that you used with the built in pressure gauge. Do you have a link for it? I'm sure that Adam knows he hit the "Neighbor Lottery" when he moved in by you!!

[@OneEyeCustoms]

Thank you! It is a power tank inflator chuck Www.powertank.com

[@DaveSchneible-sg3bs]

Maybe a safety chain would work for that dump lever.

[@OneEyeCustoms]

Stay tuned for the next video

[@andyshap]

Great video! Did Metza know they were getting a build video free of charge? One question: there must be a meaning to spitting on the tire when you put it on?

[@andyshap]

Do I see a "Doug'd" adapter on the end of your tire inflator? If so, I'm interested. I'm always looking for a better way to firmly attach my inflator to my tire. Video?

[@russellanderson3901]

Doug, I know it doesnt eliminate the risks completely but would it work to add a chock to where the bed / frame intersect and store the trailer in the up position so the shocks aren't loaded? Would also help if it is stored outdoors to avoid gathering rain.

[@OneEyeCustoms]

Great idea!! Definitely going to look into that! Thanks

[@robertdavis5163]

i just watched your video on the garage flooring, really good, i will say you love to tslk, maybe way to much, but i stayed to the end but it was difficult, great work, you are a really smart guy but chatter too much! lol!

[@OneEyeCustoms]

I got a lot on my mind, it’s my only exhaust method. Sorry and thanks I think…😐

[@toddpacheco4748]

Maybe Doug you could come up with a plan for using your trailer and adam’s trailer together ❤😮😊

[@OneEyeCustoms]

It is in the works!!

[@richardmain8059]

Well done Doug. Does the tail swing open to facilitate dumping of dirt/ rocks ect? How about putting a safety chain on the frame/bucket to catch any accidental releases.

[@OneEyeCustoms]

Yes the tailgate opens up. Already put safety chains on it and a safety latch!

[@toddincabo]

👍

[@78pinkus]

I would replace those are pins on the gas struts was cotter pins

[@OneEyeCustoms]

Already did, lol. I could see them definitively falling out. Great thought though! Thank you!

[@andyshap]

Ballast box

[@joemurray9131]

how many minutes before you modify that trailer? great job

[@OneEyeCustoms]

Already working on it.😂

[@joemurray9131]

@@OneEyeCustoms nice

[@marknunya3035]

Safety chain

[@doozerakapuckfutin]

It’s a big snickers bar … Wrong again bugger 😂

[@OneEyeCustoms]

Hahaha

[@bobfuchs3627]

Trailers

[@GeoffryWK]

Loctite Red comes in a Blue bottle, Blue comes in a Red bottle. WHY?

[@OneEyeCustoms]

No idea…..

[@joesixpack8305]

Cameras have round lenses but take square pictures. WHY?

[@artofogre3555]

Generator??? Well, nope.

[@tonygreen1067]

TL;DW