Unboxing | Creality Ender 3 Unbox Set Up and Build (2020)

As so many new customers buy the ender series printer so we remake this new video, and hope will help you all and start to print right away:)
New Year Sale! Add to Cart & Get Automatic coupon Now！$250-10 $450-15 $600-20 on Creality Official Store: www.creality3dofficial.com/
Creality Official Site: www.creality.com
Creality Official Store: store.creality.com
#Ender3 #Creality #Assemble

[@davidfont2596]

Photographically, this is the best video that I've found on KZbin to assemble the Ender 3. The vocal descriptions are lacking, though. If I were you, I'd keep the video and purchase another KZbinr's voice over.

[@wyxarcz4863]

I saw this tutorial, and I noticed one thing that was missing. There aren't any details related to the selection of the correct input grid voltage before the printer is plugged into the wall. On the side of the power supply, there is a small switch with a warning sign. This switch MUST BE SET to the correct position according to the user's local grid voltage. Most of the world's countries are using a nominal voltage of 230/240 V (I think it is the default position of the switch, but it's better to check it), some countries, like Japan, North American states, Middle American states, and the northern states of South America, are using a lower voltage of 100/130 V. I don't know what information is contained inside the assembly manual packed with the printer today, but a few years earlier there was wrong information. The switch has to be switched to the 120 V position always. I am an electrician, so I knew I shouldn't do it because I am living in Europe. But I have a friend who doesn't have too much knowledge about electricity. He toggled the switch as the assembly manual guided, and after turning the printer on, the power supply simply blew up.

[@dr.randomz6782]

Yeah the only thing I noticed about the voltage required was in the assembly book and the sticker on the back of the power supply. I wasn’t sure when is was set to the lower voltage or higher , but then I read in the book that the factory default is on 230.

[@tech_critter]

I'm in Canada, and we use the lower voltage.

[@fizdog]

Putting this together was very confusing, but thanks to your video, it made the process much easier! Thanks 😊

[@erwinperson1745]

Everything is good about this video. The only part I struggled with was the ones with pictures. Not in real life. But the printer is great! Recommended!

[@alexcrowder1673]

The voice killed it for me. I cant watch or listen to these stupid robot voices all over youtube anymore. Seriously, it drives me mad. Are people REALLY so lazy that they can't talk for themselves in 2022?

[@danidran]

@@alexcrowder1673 They do it like this because they're Chinese.

[@RickJansonCoaching]

Thank you for this. Could not have built this with the printed instructions.

[@ghostking7853]

The picture instructions confused me. This helped a lot. There were still sections that were confusing, but overall a lot better than the instructions sent with the printer.

[@CSCrimson]

Dude slow down and go one at a time on the wire connection parts. Don't rattle them off all at once with all pictures present. That was the only frustrating part

[@tech_critter]

I concur.

[@huh7270]

I just assembled mine and it’s was very fun and very easy! Definitely glad I got this printer!

[@rafebailey782]

@@mike07gamingdk43 yes

[@willettfx]

This Ender 3 is a wonderful tool l recommend this printer everyone ... Thank you Creality!

[@Creality3D]

Thank you very much to for loving this printer, thank you for your recommendation. : )

[@Caleb_Guffey]

It is a great printer.

[@randyhollis1217]

Your video was super helpful I just got done setting up my first one and it's running smoothly

[@pioneercolonel]

The video was perfect. The voice could be funny sometimes but you guys didn't miss a thing. Well done.

[@gaminpreacher2909]

Thank you! The only guy actually showing what he is doing.

[@justacasualgamer2]

This video helped me alot. I got this yesterday as a gift and had a hard time putting it together. Im stuck on the setting up part. This video helped alot though. Thank you.

[@jimp1252]

BY FAR the best Ender assembly video. I viewed most of the others.

[@3Drcnc]

Notes: That voice was weird but fun. Every part is in plural. You aparently need to prepare bolts. The spool holder is a barrel. The extruder is called the extrusion meca nis... .em. The allen key sounds wierd as well but other than that it passes the qc check. (Maybe)

[@Creality3D]

Thank you for your correction, you listened very carefully. (๑╹◡╹) ﾉ "" "

[@stevenA44]

The voice (computer generated) is stupid. It should be outlawed!!

[@SalElder]

This is useful for disassembly and repacking as well.

[@Caleb_Guffey]

The assembly of my ended 3 was easy fun and not very hard it’s easy enough to put together with out frustration but hard enough so you could fix a problem easily. I love and recommend this printer to any one who is a beginning or experienced 3D printer.

[@Creality3D]

Glad you like this 3D printer, and thank you very much for your willingness to share more friends.

[@ajfloats387]

This gives me flashbacks

[@Creality3D]

: )

[@Goofys-puppets]

Thank you so much I’m so exited to print stuff :D

[@NATHXN16]

Thank you Steven Hawkins, you just saved my lad’s Christmas from becoming and aeroplane 😂

[@JalteJKR]

Does the newer versions of the standard ender-3 come with the "motion" menu enabled? Good video btw :-)

[@PIGGYZ]

They ain't even gonna give you an answer lmao. Just a heart 🤣

[@JalteJKR]

@@PIGGYZ 😂😂

[@gravit853]

Why was the extruder bracket made smaller? Now the filament touches the Z screw.

[@joanestradaramos1541]

THANK YOU!!! Now i can upgrade my IOT laboratory

[@foyevision]

Thanks, this video was helpful!

[@PSUNATION]

The voice on this video. C’mon’m

[@awdhootkanawade]

Why creality don't provide sample filament that can completely print their own test dog file 😥

[@Caleb_Guffey]

I had more than enough to print the dog.

[@ghostgunner27]

They do with ender 3 and it’s absolutely trash

[@lolihd9946]

@@ghostgunner27 can you make the print of the dog with the filament that comes standard with the ender 3? Do you have enough filament ?

[@codycallaway9057]

Wdym mine came with filament

[@levitidwell5318]

I had a Chinese cat 🎎

[@whoiallhatewhoiallhate1268]

Thanks!

[@XD8783]

Muito obrigado!!!

[@YoutubeChannel-sb1su]

just got this printer and i'm assembling it slowly

[@user-ds2uj1kq9u]

Very useful tutorial. Thank you.

[@R2D6_10]

I have a little yellow clip that is on the X line (bottom 2 panels at 6:54) I can't figure out where that goes.

[@un_mexican0783]

The intro for the video hit hard

[@heeheehaw393]

the nozzle on mine only has the very tip coming out of the thing, is there a way to fix this?

[@sidrasalman4683]

Cant seem to align the x axis with the z axis. The assembly guide for this printer is horrible

[@cobusgrobler662]

What would be epic is a clone MMU2S or any other device than can do up to 4 or 5 colours, on an Ender 3 or any other Creality machine

[@Creality3D]

Very bold idea. d=====(￣▽￣*)b

[@Laladreamgames]

@@Creality3D d

[@Laladreamgames]

fad

[@Laladreamgames]

ad

[@sivakumar4760]

Is the TF card included with the 3D Printer??

[@heathersanders5592]

I don't understand how to do the step at 4:54. Looking at this it looks like the belt is supposed to be on the silver piece but when I try to fit it there it the belt is no longer on track..

[@lifehackswithdrea2956]

I am struggling with getting the motor on. It's so frustrating.

[@ruztedshut]

And my printer doesn't have "prepare" as an option...what do I do?

[@yellowjello7686]

What program do I use with this? I’m completely new to 3D printing and I wanted to get this printer to start off? Any tips and tricks?

[@Creality3D]

with the 3D printer, you can print models , design ideas, prototypes etc. it's amazing

[@arsailor2341]

It's crazy how realistic robots are becoming

[@andrewmendoza904]

How do I align mine? My X says -3 and my Y says -10 but Z is at 0

[@ramazi23]

I'm unable to properly thread the PLA after setting up, anyone know how to fix

[@PowerOfYouth652]

THANK YOUU

[@ScopeForDope]

Mine came with black M4x20 screws and they aren’t long enough, is there anywhere to get the correct ones?

[@Creality3D]

vip.creality.com/en/category/82

[@HadropAndWhiteRavitShow]

i dont have a TF card do i need it?

[@LanceTheAmerican]

Probably yeah, I’m pretty sure that’s a major component of the computer

[@tanvirvirdi9956]

Ok got it done....

[@loneshadow0844]

The only thing I don't know how to do is looping the teeth looking plastic over the nozzle. It's to short

[@Y12]

4:20 minutes finally done

[@senurasenaratne5782]

3.22 mine had the nuts in the place where the head should be so the extrusion won’t fit over the bolt

[@ethanwhitwell6980]

I have the same problem any ideas on how to fix it?

[@senurasenaratne5782]

@@ethanwhitwell6980 I thought it was a design issue turns out I was wrong lol, look at the instructions again and see if you have the correct part or orientation and everything. I can’t remember what I did back then but I remember feeling stupid for thinking it was a manufacturer’s defect after looking at it again.

[@ethanwhitwell6980]

@@senurasenaratne5782 yup I had the wrong part 🤦🏼 thanks for the help.

[@lifehackswithdrea2956]

The TH easy access rotor or motor not sure of actual name is super difficult to get screwed on. Ugh I hate when things are going smooth then something that is supposed to he simple isnt!

[@lifehackswithdrea2956]

It was me with the wrong screws. Smh😂

[@7withyou652]

I have a problem.. When autohoming it moves upwards and when i again autohome it again moves upwards..can anyone help?

[@velesBH]

Thank you for your video I have subscribed and like

[@Creality3D]

thank you

[@velesBH]

You welcome

[@andrewmendoza904]

For some reason once I was done setting up mine Ender 3D printer my axis said X -3, Y -10 and Z 0. How do I fix this?

[@larstheberserker3398]

I don’t have an Ender but I’m looking to get one (that’s why I’m watching this video) but I do have experience with TAZ. I think the problem you’re having is that you have to calibrate your printer. Maybe go to the move axis option on your printers screen and see if you can reset your axises from there.

[@MARKMAS55]

what are dimensions of BOX package??

[@Creality3D]

Friend, the machine size 440*410*465mm, and the box is just a little bit than the machine size

[@3DMonkey975]

I would like to do an unboxing and construction video

[@Creality3D]

Just do it ! ＼(＞０＜)／

[@fabiopinto6642]

otimo video

[@LanceTheAmerican]

Did anyone have trouble with the bottom screw on the right tower?

[@pims_enraged_state]

Yeah

[@LanceTheAmerican]

@@pims_enraged_state Good times. Now I have to worry about upgrading the suspension system for the hotbed because a spring is missing haha

[@mariaisabelcardoso1792]

alguien que me pueda enviar el cubo que viene para calibrar, ya q sin querer lo borre, gracias

[@Creality3D]

sorry, not quite understand you, any way, if you have problem ,plese try to email : [e-mail] to get technical support

[@agenteel6165]

does it include filament?

[@Creality3D]

Sorry friend, it doesn't include filament

[@agenteel6165]

@@Creality3D ah damn, well thank you for replying!

[@ElMatero6]

Yooo they even got Stephen Hawking to voice it!

[@Creality3D]

Friend, are you being sarcastic? Sorry, we will improve the quality of our dubbing in the future

[@ElMatero6]

@@Creality3D Lmao Im kidding, the voice over was perfect! Your text to speech reminded me of hawking! Its all good!

[@dialer2]

The instructions aren’t good at all in the manual. Thank God NOAA let them use the weather radio voice for this video! 😂

[@Snacman8]

Is anyone else here to figure out how to put it back in the box for transport? lol

[@offtopicmusic9639]

What the fuck do to with the belt that is in two?

[@LanceTheAmerican]

If your belt is cut in 2 I think it’s broken

[@srhabb]

it didn't turn on

[@n0vember91]

There is a voltage switch on the back of the power supply push it down to 115v

[@alexcrowder1673]

Wheres the bass drop? Not cool lol.

[@gwagwa76]

I’m gonna get one :) Update: nevermind prusa gang

[@xd_raze_7122]

Don’t I wanna die building this I’m not even joking I’ve literally cut my hands with this shit

[@gwagwa76]

@@xd_raze_7122 rip lmfao

[@acvtfassociation8386]

Im i need help my fuckin screw rod thingy isn’t screwing in

[@piggywiggychaunchy3948]

You ever figure it out?

[@acvtfassociation8386]

@piggywiggychaunchy3948 yeah apparently it screws to the left I've been following the rules of righty tighty lefty loosey

[@ianfairbanks1318]

In the beginning of the video, it shows a guy opening the box using a putty knife. You actually get this tool with the Ender 3. The problem? The damn tool is located inside the box.... wtf man!

[@Creality3D]

Sorry for that, bro.

[@silentgorilla3473]

My motor blew up half way through the tutorial

[@Creality3D]

If in need of technical support, please email to [e-mail], which is our tech support as well as after-sale service.Due to tons of emails go into this folder, it maybe response you not instantly, I'd appricite you if you can wait for it . or join in the Facebook Group (facebook.com/groups/3110994512278883/) to discuss with thousands of experienced 3D printer users.

[@golddarren140]

What is that guy on about they are wires not line

[@Creality3D]

Thanks ))

[@asandax6]

What are you on about Wires can be called lines or leads.

[@lulamix445]

what happened with the voice ??

[@Creality3D]

Nothing happened (｡◕ˇ∀ˇ◕)

[@ElMatero6]

They hired stephen hawking to do it

[@rainierviz]

nut.

[@chillgaming707]

nut.

[@RussDahlberg]

How much would it hav cost to just pay a human to read this script?? I bet you could've found someone on Fiverr.

[@ElMatero6]

They did, it was stephen hawking

[@totallysmooth1203]

can we do without the stupid drums?

[@DetroitNerd]

The Steven Hawkins voice makes this unwatchable

[@daddydeepdink907]

What Software are we supposed to use! All of this and the instructions it comes with says software varies... AT LEAST GIMME SOME OPTIONS STUPID MANUFACTURER Can people recommend the best software to use (With Links Please)

[@Aeaaoooaaa]

In the instruction manual that came with the printer they tell you what software to use, they recommend Cura and Simplify3D (KZbin won’t let me post a link)

[@gigabek]

Thank you for this comprehensive and short installation guide. I watched russian guys do installation and it was meaningless. Either one does a 10 minute guide (literally snapping with his fingers, fucking wizard) or another does an hour long guide with removed key moments.