I currently have 6 Taurus pistols and would love to add the PT1911 to my collection at some point. Thanks for the video and have a great weekend.
@Asukastrike572 жыл бұрын
How would you rate the reliability of this company? its fairly new to where I am from
@djeslic5377 Жыл бұрын
I got the Black with Pearl grips from the wife as a birthday gift... I absolutely love it.
@mrdato11610 ай бұрын
That's a great wife 💪
@JRDBOSS-wx7nj4 ай бұрын
W wife
@hollywoodeastchannel5 ай бұрын
I have a Taurus PT 92 I had purchased 35 years ago good gun. When I had purchased it, it was totally covered in thick packing grease, more like axle grease. It took me a while to get all that gack off of it and apply a proper gun oil to everything. Any way this looks like my next pistol purchase. I always wanted a .45ACP and this one is a very attractive firearm in the 1911 design plus it is very affordable unlike some of those others that can cost thousands.
@mikewalters49942 жыл бұрын
Nice, I bought one last week, picking it up Monday. Cannot Wait !!
@garyallen98402 жыл бұрын
how was it? also planning on picking one up in the same stainless since I seen the a review on the solid black one the finish easily rubs off.
@AriePharmD10 ай бұрын
If you look closely @04:29 Taurus takes the extra effort to hand match and stamp the serial number on the slide, barrel and frame. You can clearly see ACH194374 on each component. I’m curious on the FtF or FtE ratio after a break in period of say 200 rounds.
@mrdato11610 ай бұрын
It's more reliable than Kimber , and Kimber in same configuration is 1600 gun. Only 1911 I would consider over Taurus is Wilson combat stainless. But I am not dropping 5k on 1911
@MonoKrohm_20202 жыл бұрын
Now that’s a fine looking weapon.
@sonnyarmas71332 жыл бұрын
I like the matte finish stainless steel compared to the shiney ones
@jemsonthoudam38752 жыл бұрын
nice resolution and good review as compare to others great work keep doing 👍🏼👍🏼👍🏼
@GunBoxTherapy2 жыл бұрын
Thanks man, I really appreciate it when people notice that! I really pride myself on recording and doing slight editing in 4K, 60 frames/second and HDR. Takes up a lot of space and rendering takes forever but I do it for people like you that notice it.
@DonPato19112 жыл бұрын
@@GunBoxTherapy I join in the congratulations and thanks, will we have a video seeing shots from this 1911?
@jemsonthoudam38752 жыл бұрын
you r welcom and love to see other videos forward specially in handgun which is unique......too
@MrBlackey6662 жыл бұрын
@@GunBoxTherapy do you have a video of you shooting this? I’m looking at the exact same one
@celiogomes6785 Жыл бұрын
Era pra vir pro Brasil
@davidgee1728 Жыл бұрын
I just bought a used 45 from a pawn shop, Looks like it should have been passed the breaking period based off its looks and i still have the ejector problem when i rack the slide slowly.. when i take the slide off and shake it i can hear the ejector moving. It works good while shooting tho
@bitterlifes2 жыл бұрын
Excellent looking pistol 👍
@thelegionoftools2 жыл бұрын
It sure is! Thanks very much for pointing that out. 😎🤠👍 Beretta9MMUSA Sr.
@freshchez72502 жыл бұрын
Just picked mine up yesterday. Great video. 👍
@bingbongcrisologo36142 жыл бұрын
That is one beautiful gun! ❤❤❤
@thelegionoftools2 жыл бұрын
The 1911 @ 2:15 is pretty Nice! Thanks for sharing it. I am thinking about getting one. Stay Safe! Beretta9MMUSA Sr.
@dxvidmejix29822 жыл бұрын
ive been waiting for this
@jasonwolfe9892 Жыл бұрын
I like the looks of this gun minus the word Taurus on the slide. I like the looks of the Magnum Research better. May go that route.
@THEBANDIT79792 жыл бұрын
Is it a good gun ? Does the trigger jam or any defects that you have encountered. Looking to pick one up
@danhollatz59442 жыл бұрын
Picked up a Taurus 1911 Commander, installed Willson combat ambidextrous safety and springs its awesome! 1000 rds no problems!
@josheuaking74162 жыл бұрын
Yes, it's a fantastic 1911
@TacticalTerry2 жыл бұрын
The PT1911 is pretty fantastic in general. Some have 10# to 12# triggers from the factory, but most of them are around 4# to 6#. Fit and finish is on par for the price they used to be (around $400). I'd look for a gently used one and buy it. Some are up to $125 off new price.
@andrewnguyen77372 жыл бұрын
What is the price on this one in Feb 2022??
@johnpayne1638 Жыл бұрын
How has that ss 1911 been performing?
@mick5740 Жыл бұрын
Why would they not put a finish in the slide
@garrettlundy3959 Жыл бұрын
Buy some 800/1000 grit sandpaper for $10 and get to work!
@dennissardan5384 Жыл бұрын
How much is that?
@fishfuxors Жыл бұрын
Frame, slide and barrel are all hammer forged.
@rafaelmadrigal92792 жыл бұрын
SWEET
@rodbayani221 Жыл бұрын
How much is that in the Philippines
@joebertdelrosario86802 жыл бұрын
How much
@orangedodge8333 Жыл бұрын
I want the 9mm ss
@georgemendoza25522 жыл бұрын
Que bonita pistola Taurus 1911 me serviría mucho en mexico
@antoniocarlosbaldo94222 жыл бұрын
Linda! Top!
@rickhoneycutt60102 жыл бұрын
I’m wanting to buy my very first 1911 but I am on a budget so I’m looking at this Taurus or the new SDS Imports 5 inch railed model in stainless steel . does anyone have a comparison of these two or own these two and have a preference both look good both are good price I do on some other Taurus firearms wheel gun. Thank you for your time
@michaelmurphy96992 жыл бұрын
Me too I am not trying to buy a gun that coat more than a house note i just want one for the collection.
@propgungoesboom26474 ай бұрын
Not a 1911 guy or a Taurus guy but that's a handsome pistol
@Manohman-t2r11 ай бұрын
Not an adjustable trigger iv owned one❤
@iga372 жыл бұрын
👍 👍 👍
@JonatanPontes252 жыл бұрын
🇧🇷
@jake32282 жыл бұрын
Is this mil spec?
@TacticalTerry2 жыл бұрын
For the most part mill spec parts will work with a little fitting. Every once in a while you'll see a PT1911 that doesn't play nice without Taurus parts. I believe the beavertail grip safety (custom width) and slide cutouts for the sights are proprietary.
@ericvonp5 ай бұрын
Held a 1911 for about 30 seconds, that was it …not for me.
@yeulakho6574 Жыл бұрын
Nice mec-gar mags
@SNIPER_NO_SNIPING Жыл бұрын
Said no one ever. Love their stuff but their mags suck.
@simoneoliveira-s4w Жыл бұрын
Linda
@imnotawasteoftime2 жыл бұрын
Pictures make it seem like it's more of a polished stainless finish :/
@pickin4you2 жыл бұрын
The barrel is NOT coated. It is just a bead blast finish, just like the slide and frame. Also, this Mags are NOT stainless. They are blues steel. Turn on your brain dude. Why would they build a stainless gun, label the Mags stainless and color them Black???? They wouldn’t. They are just chrome moly steel that is blued.
@genuineknowledge93362 жыл бұрын
I am personally not a fond of the Taurus’ specific typical design they add to their guns. This one has that same feel like color & margines we get to see on almost all Taurus products like Tracker Series Revolvers. I don’t understand why would they add this lame color to their handguns, the one this guns got on it.
@juliangillespie74542 жыл бұрын
Just what I need everyday! Don't miss out - Promo-SM!