UNBREAKABLE KATANA!?! Did we discover ENMA from One Piece?!?

This sword is CRAZY! Be sure to check out CloudHammer SteeWorks: cloudhammerforge.com/
The sword in this video is called the Black Lotus s5 standard profile: cloudhammerforge.com/products...
If you like the content and want to support the channel, you're welcome to support us through playeUr, Subscribe Star, become a channel member here on KZbin or through Pateon:
PlayeUr: utreon.com/c/shadiversity
Subscribe star: www.subscribestar.com/shadive...
Become a member: / @shadiversity
Patreon: / shadbrooks
NEW Shadow of the Conqueror T-Shirt:
shadiversity.creator-spring.c...
Come check out my other channels!
THE SHADLANDS: / @theshadlands1142
KNIGHTS WATCH: / knightswatch
Subscribe to my website so you don't miss an upload: www.shadmbrooks.com/
Follow me on Facebook: / shadiversity
Follow me on twitter: / shadmbrooks
My novel, Shadow of the Conqueror Audio Book affiliate links:
US: www.audible.com/shadbrooks
UK: www.audible.co.uk/shadbrooks
CA: www.audible.ca/shadbrooks
AU: www.audible.com.au/shadbrooks
Ebook, Paperback and Hardcover available from most major book retailers, here are a few of the main ones:
Amazon affiliate link (be sure to navigate to your country's amazon site):
amzn.to/2XErUaR
Barnes and Noble:
www.barnesandnoble.com/w/shad...
Kobo:
www.kobo.com/au/en/ebook/shad...
Awesome Shirts and chainmail print clothing: teespring.com/en-GB/stores/sh...
Visit Calimacil for the best replica foam swords and LARP weapons: calimacil.com?aff=38
Buy my sword IMPERIOUS from Calimacil: calimacil.com/products/imperi...
Community run discord server: / discord
#onepiece #anime #katana #supersword #swords

[@Matthew_Jensen]

Thank you for the shout out and I am glad the sword held up well. It is nice to see you put it through the paces and have it deliver similar results to what I tested. I may suggest having something to cover your neck and face. Does not look great on camera but hitting swords on hard things has had them flying back at my face. Good job!

[@shadiversity]

Hey mate, our pleasure and thanks heaps for the recommendation, and also the concern for our safety ^_^

[@Secret_Moon]

Just about to comment about the face and neck cover. Literally gripped my seat in fear the chipped metal might shoot back into their necks.

[@theZDOME]

Yea that video where the shard flew back at you was real scary, cool but scary

[@Grandwigg]

Scott from Kentucky Ballistics would agree. I'd hate for Shad or the team to have to stick a thumb in the neck on the way to the hospital.

[@gwydionrusso3206]

​@@shadiversityyou guys should review some of the blades from the company "zombie tools" despite their silly name apparently they're pretty good and also use a ridiculously hard Steel

[@MegaBloodeye]

S5 steel is the same type of steel used in jackhammer bits. It's basically super tool steel because its main application is to literally go through stone.

[@jacktheomnithere2127]

impressive, to say the least.

[@madpsycho6]

Was going to say that S7 steel sword would also be extremely durable.

[@absolutedegenerate2992]

BRO no wonder

[@user-dx1ce4uf5h]

Hell The stone test makes sense now

[@mikeboyce21]

S5 is very tough and the tougher the steel usually means its going to be easy to sharpen. I have stuff in s7. Which is close to s5 and its tough as nails. As is 4140, but dont confuse toughness in steel as strength. Toughness is the ability to take deformation with breaking, strength is the how hard can use it before it deforms.

[@walkir2662]

This is probably the way some legends of magic swords were created - someone had luck in steel composition and created a nigh indestructible blade. Of course anyone facing it would think it's magic. (Some others may just have been "I wish this existed" leading to legends)

[@StickyTank]

That is, in fact, exactly how those legends formed.

[@outandabout259]

yeah, I think it's possible. Not to the extent of modern tool steels but very likely far beyond what was the norm. The better the strength of a steel gets, the more precise the required composition is. The S5 steel, for example, consists of 9 different elements at precise proportions.

[@gaming1zanagi-1999.]

​@@outandabout259so what about S6? Assuming it is possible to create S6 swords or katana

[@SpeakyDeak]

the Egyptians and others made a blade out of a meteor, i guess hot and at really low G makes for a steal that cannot be replicated on earth at 1G and lower temps. maybe.

[@TechnoMinarchistBall]

I mean, this is pretty much how we came up with all of our steels. It's just that for most of human history we had very little way of recording it, and there was a general attitude where smiths and guilds kept their formulae secret from competition.

[@frogz]

"Everyone always quotes my brother" -Moon Tzu

[@alundavies8402]

Ha ha

[@travishancock9120]

I just love that a sword manufacturer was like, "You know what we need? A katana made out of chisel grade steel. We need it to actually cut through stone like in the movies!" And Tyrinth was like, "Heck yeah! I'm going to try it on stone." This is definitely the fulfillment of some crazy swordsmith's dream.

[@eliteteutonicknight1]

Imagine a sword being so tough that it unlocked a new level of testing 👌

[@aceswild5071]

S5 Shock-Resisting Tool Steel, is a medium carbon content tool steel. What makes this oil-hardening tool steel unique is it's silicon-manganese content. This blend creates a tool steel that exhibits the highest impact toughness of any "S" grade tool steel. S5 is an excellent choice where the properties of silicon-manganese steels are desired in combination with well-known advantages of oil-hardening steels. A reduced tendency to distort or crack in heat treatment is accordingly combined with high toughness in S5. In fact, S5 can be hardened to approx. 62 Rockwell C. This makes S5 and better choice for applications where a higher strength than S7 shock absorbing steel can provide.

[@CreepyMF]

Those where some damn interesting facts, thanks for sharing those.

[@thomasphillips885]

*its

[@ilovejettrooper5922]

Is there a better steel than that??

[@gre8]

​@@ilovejettrooper5922 there's this new steel in the market called magnacut that has the knife-making world in awe. I don't know how well it would work in a sword though, as knives and swords have different design requirements.

[@user-vt2cr8qd1b]

@@CreepyMF just google S5 shock steel and it's the first search result

[@demandred1957]

Oh ugh.... S5... As a machinist, I make die molds out of this stuff,,, It's really tough to machine. Hard, tough, wear resistant, and eats endmills and drill bits if you get too aggressive with it.

[@MaaZeus]

Dude! Now give it to Tyranth and see how well he can repair it, how much of the what little nicks and scratches there is can be polished away! You already started it with the quick sharpening job, now go all the way. What a magnificent sword even if it lacks the hamon and such katana features, it doesn't matter if the blade is just that gosh darn good!

[@MaaZeus]

And Shad, they do have S5 longsword. It is a bit crude looking as far as fittings go but it is the blade you are probably most interested about.

[@jerryandersson4873]

Yeah, real interested in that here too. Some nicks may remain, but how good can he do it?

[@slimee8841]

This sword is strong but the stone test still hurt to watch.

[@barrybarlowe5640]

1000% agree with you. I was cringing on the stone test.

[@rubberbandba11craft]

the shock had to travel somewhere

[@user-vt2cr8qd1b]

also probs uncomfortable physically for Tyranth due to hand shock

[@JCOwens-zq6fd]

S5 is good stuff. At .50 its actually similar in carbon content to 1055 but it also has .65 Manganese .60/1.00 Phosphorus .030. Sulfur .030. Silicon .175/2.25 Chromium .035 Vanadium .035 which along with its rather high temperature tempering process is what imparts its particular toughness.

[@windhelmguard5295]

really weird seeing sulfour listed here, as all common knowledge says that sulfour in steel is an impurity which is not desired.

[@TheSteam02]

@@windhelmguard5295 A tiny amount of sulfur is actually pretty good for a blade. But without proper technique or modern industrial processes, sulfur content in the steel can quickly become a problem.

[@robpullar4257]

The "secret" ingredient is 0.15-0-35% molybdenum as well.

[@YouTubeCensorshipStinks]

I work in the auto repair industry. There's a reinforcement bar in most car doors to help prevent the other cars going through and killing the occupants. There's also metal parts for the window regulator. So you probably hit that bar. The fact it survived it is pretty amazing. I'd love to see a mace or warhammer made out of this.

[@bodesanad4328]

Free palestine✊️

[@MaaZeus]

I think this material would be a waste in a mace of other blunt force weapons. With those weapons the deformation and chipping of the business end does very little for the effectiveness of the weapon. Thats why even after steel was invented you could still occasionally see bronze maces and such. However, a crows beak or such war scythe type weapons that need a sturdy, pointy piercing head, this steel might be excellent.

[@MIKE_THE_BRUMMIE]

Free Palestine from Hamas and Islamic terrorism

[@slowthriller]

​@@bodesanad4328Don't mess with Israel.

[@marcogenovesi8570]

Metallurgy has improved quite a bit in the last 400 years, I enjoyed the "time capsule" of how middle ages people would react to it. from "10x better than normal sword steel pffft!" to "wow it can chip rocks" and "it's a genuine anime sword in real life"

[@TalesofDawnandDusk]

You know, I keep thinking "they've done so many videos about katanas. They have to be out of ideas for them by now. There's not much more you can do with them" But sure enough, a week or two later you guys always manage to find a way. You have this weeb's utmost respect.

[@OzzySilent420]

That is some insane steel there, now if you'll excuse me, I need to look for my jaw, I seemed to have dropped it.

[@RainMakeR_Workshop]

Can't wait till the higher end sword manufacturers start using this. Imagine an Albion sword made from this Shock Steel... Also, I think this would make a FANTASTIC steel for a Federschwert.

[@gloving4hire]

Albion is kinda silly, ZT is the real sacred forge

[@RainMakeR_Workshop]

@@gloving4hire Not sure how they are silly. But I mentioned Albion as they are probably the most well known. There are many quality manufacturers I would love to see adopt this shock steel. As for Zombie Tools... Now that's some silly stuff. Cool, but genuinely silly. Plus as a UK resident, I can't get anything branded as "zombie" due to our nonsensical laws. Also I like traditional medieval and renaissance swords, not modern tactical pseudo post apocalypse swords.

[@gloving4hire]

@@RainMakeR_Workshop I was going to say something back but once I realized you’re a limey it all made sense. But I love you anyways ya tea drinker

[@gloving4hire]

@@RainMakeR_Workshop ZT dont break, nothing silly about that. They need guards but if you practice with them, they move great. I have a normal long sword I still practice with and agree design and such is more important than anything but…the Xiphos is a God tier mythical beast.

[@Ranstone]

@@gloving4hire My 2,500$ Albion would change your mind.

[@thedmdidit9842]

I wanna see an axe made out of this material.

[@yamatokurusaki5790]

Rock and Stone

[@graljoffrewithoutanarmy860]

And a warhammer! Hell imagine a halberd made of this!!

[@kassiog.6595]

Would probably go through those rocks just as well as splitting wood

[@myusername3689]

I wanna see a baseball bat made from this material. Metal Bat.

[@cravenmadness967]

@@myusername3689 you just improved the STICK

[@jimmydean7219]

Ah yes, my favorite channel of materials science enthusiasts discovers S5 steel. A fun day indeed. Wait til you find about S7: the steel so spicy it work-hardens. The more you whack it, the harder it gets. Genuinely a bit dangerous with how hard it gets, during tool creation. Spalding off chunks of softer steel becomes a real risk to be aware of. Also, like many others have said here, loving the weeb representation!

[@rubberbandba11craft]

so my hypotheses tyhat its non newtonian steel is correct? would a constant weaker force do more damage than a hard fast force?

[@takisk.7698]

s5 and s7 isn't even the peak of what a modern steel alloys can achieve btw.. those are just easy to obtain high carbon steels, readily available n the market.

[@InternetCommenter]

@rubberbandba11craft So far we've discovered zero non-Newtonian solids. so that's very unlikely. Materials like bronze also work harden. Work hardening makes the material harder but also more brittle. Once hardened it doesn't go back to it's unhardened state without relaxing it through applying for example heat.

[@Markbell73]

​@@takisk.7698oh, I would imagine so. I've been following the evolution of knive steels for 25 years. And the acceleration of development in the last 10 years has been neck breaking(Think Metal Gear Solid). It seems that only in the last 3 or 4 years have sword smiths begun to experiment with using more modern advanced steels. I can't wait to see what's around the corner. Fantasy is becoming like science fiction. What seems like magic, only remains such, until a real world Wizard(we call them metalurgists) figure out how it would be made. Soon we'll be able to control the atomic structure of steel, right down to the precise alignment of each carbon atom from every single nanometer of the steel. In Star War's it's called durasteel. Tie fighter's are made of this. It is a super steel. Those blaster cannons on X-Wings are not anti fighter blasters, those are anti capitol ship cannons. They are made to blast through the heavy durasteel armor of capital ships, like Corvettes and small cruisers, anything under a Corellian heavy Cruiser, like a Star Destroyer. This is why the blow up Tie's so easily. It's also why X-Wings need shields. Cause Tie cannons are exactly as powerful. And Tie cannons cycle like belt fed machine guns. And they chew through X-Wing shields like they aren't there. Anyway, Durasteel is steel made at the molecular level. And that's what we will have, and mere minutes, from tomorrow. Why? Because they are already developing a high powered partical beam laser to be fitted onto a fighter, like an F-22 Raptor. So what is a next gen Raptor like fighter going to be made of? Durasteel. Or duratanium! Who knows what they'll call it. It will be a metal that take extreme temperatures, extreme g loading, and possibly even near contact high explosives, without bending or breaking. Metals that push the boundaries of what we thought was impossible, into what is possible and beyond. Show Enzo Ferrari from 1958 an Acura NSX from 1990 and he think he's looking at a Space Age race car from the planet Krebular.

[@ghoulbuster1]

@@takisk.7698 Interesting, so there are sword smiths in real life that create legendary weapons.

[@ninjawannabe87]

not just a longsword with this steel; a leaf-shaped blade longsword or some cool looking fantasy designs that are sufficiently functional, would also be awesome

[@AlyssMa7rin]

Orcrist with this steel

[@uberpinkwarrior]

...I'd want to see a thrusting sword, like a tuck or rapier, made of that material. A sword where the stronger material would actually benefit the primary combat style (thrusting). The harder material would probably make the thrusting way more effective verse armour.

[@ViolentMessiah666]

Wow, the bluestone test had me wincing for the first couple of hits. Really thought it was gonna kill the blade

[@emilbroseliger8506]

Love your videos. As a sword enthusiast, i am super happy for your achievements, and I hope, that you will achieve even more in the future😀🗡️

[@jacktheomnithere2127]

what's that sword emoji?

[@jediritterger]

Now imagine making an Armorslayer out of this. At this point it would not even be a armorslayer but a sword breaker 😁

[@OmegaSaiyanPrince]

Oh my god please tell me you'd commission someone to make a longsword out of this steel. Itd be fantastic to see that come to life!!!

[@haninnamir6116]

There is one on their website I just checked

[@kevinmorrice]

i would love an S5 shock steel rapier, if cludhammer ever makes one, i might just have to go into to debt to get one

[@lordyathnon]

I'd love to hear a breakdown of when you'd prefer a sword for hardness rather than sharpness, and what the logical best use of this "magical steel" would be in a medievil/fantasy setting

[@odotawaissaku3755]

BE CAREFUL with those steel rings!!!! It looks like they were flying up a good bit when Tyranth hit them. Make sure they're held down securely, cuz those steel rings absolutely could take a chunk out of your face or arm!

[@Brain_Sync]

Safety first. Good call.

[@AlyssMa7rin]

As the experts said, Safety Third

[@veritasmod7013]

CloudHammer should definitely be sponsoring this channel now.

[@jasonguest5820]

The "S" in the name "S5" means "shock". S7 tool steel can get even harder than S5 and it's easier to heat treat too. Shock tool steels are still popular for weapon disks in Battlebots.

[@EldritchDragoon]

They do in fact have a longsword under the S5 section for $750. Maybe they send you that to review sometime if you're lucky.

[@spcraftsman2656]

I am appreciating the weeb representation in the show!

[@m0-m0597]

Waku waku Oh dang, wrong Amine

[@isaiahdaniels5643]

​@@m0-m0597 Ah it's about 4:30 AM. Wrong sleep schedule.

[@legendofzeldafan-nk9bv]

Now that's what I call a good sword!!!!!! Holy cow!!!!! I cannot believe how well this sword held up!!!!

[@johnhaaff5930]

The uncontrollable giggles got me! 😂 That is the most impressive demo I have ever seen.

[@jacktheomnithere2127]

you know what i'd like to see? a shortsword - with the blade of a Roman spatha - and shield made of s5 shocksteel. that combo would be a beast! monsters would stand little chance.

[@Joe___R]

Modern metallurgy has come a long way since we were using swords in combat. Modern super steels can definitely be used to make a sword far better than anyone that ever existed in the past. You can see these steels being used mainly in the high-end knife world, especially custom-made kitchen knives and pocket knives.

[@kylejolly7751]

Would love to see a polearm using this steel. Imagine how awesome a halberd or mace would be with this. The shaft would likely break long before the head does.

[@Knight_Astolfo]

I have a knife made of S5 No joke, the guy took 3 years to make it Not sure if incompetence or demand, but it's a big honker I use as a replacement for a bush knife and forest axe. I've taken down trees 8 inches in diameter with the thing and it still looks new, especially when I polish off the sap.

[@travismason7368]

I remember a old show showing off what they called Angel Steel. That was using some new high tech and old tech to create some of the best steels. They are probably out of the budget of the show right now but in the future.

[@gundanium3126]

Note: i am not a full-blown metallurgist, but i know enough to get by as a bladesmith. I got curious about this steel as I have worked with a higher grade of it, S7 (i made my first punch from this), and I know ABS Master Smith Howard Clark used S7 in his Bainite katana series not surprised. The steel is made for making chisel. S5 steel is a high-hardenability very high alloy tool steel...its hardenability is high enough that if you dont temper it depends on how hot you quench it as it has one of the highest ranges of hardening temperatures I have seen (I am using Fahrenheit as it more accurate then Celcies) 1600-1695F. that also has the issue of if you dont temper it in 30 min if you went in at 1600F or 15minuites at 1695F...it will Crack. So it is a very very tough steel also it it does require hotter temperatures to forge. it likely will NOT take a classic Clay Quench differential hardening but you can probably blue back the spine. also without going into the techciall stuff that i bearly understand, as like i said i know enough to get by and i am using a turm not thrown around a lot is a higher end of carbon content middle-carbon at .50-.60C steel which is what Swords are supposed to be made of. looking at the high T-10, which is the same as W1...has very high carbon steel and actually has to be tempered right after quenching and should not even be put in a cold furnace...not what you should be making swords from, but it works great for knives....and drill bits. Not necessarily swords

[@vegladex]

It doesn't look so much like the blade chips even slightly as it KNAPS!!! I looks like FLAKES are coming off that, like flint!

[@gratefulronin]

You guys got the last s5. I almost got it a few weeks ago, but I opted to picked up one of their budget sx105v instead. Weighing on reviewing it myself. Thanks for doing the car door test. With another reviewer and similar results. I might have to get the s5 when they get back in stock now.

[@gratefulronin]

Does that s5 blade geometry have a convex, or a flat grind?

[@Jaedeok82]

Sx105v is a great steel for a workhorse cutter. I have a through hardened unokubi and the edge retention is significantly better than my 9260 blade while having a good durability to it.

[@richard_n]

Loved this episode. One of the best you guys have done IMHO.

[@gfmol845]

It was amazing to see everyone´s enthusiasm over this. Also needs to be said, congrats on the camera work, the takes keep on getting better with every video. Cheers!

[@icebear5554]

Love mine! Got the all Black Lotus from RVA Katana .. amazing steel, amazing leather wrap.. wish the blade had a hamon for aesthetics and a bo-hi to lighten it up a bit but I honestly can’t complain.

[@TauFrost]

It would be interesting to see how this compares to Zombietools's Apokatana, as Zombietools also have the reputation of being indestructible even under extreme circumstances.

[@mr.0474]

enma was the only sword to cut kaido. Shusui was the Near Indestructible Sword. But the sword in this video is like emna. In the anime the sword forces the user to exert more energy than needed.

[@Shadx27]

10:09 started thinking of a footman hitting a building in Warcraft...

[@ryanread8617]

Damn S5, that sword is unbreakable.

[@satouanimation]

Wasn't that actually a good katana? 👀👀 Now that's a useful blade! Gonna buy it

[@natetaylor9002]

I've wondered what steel/forging would give the best swords steel....and now I know! Thank you!

[@Kratos_God_of_50_BMG]

There's also an S7 blade that you can get as well, but I haven't seen one tested or reviewed yet. When the blade hit in the car door and flexed, it was the door window motor that it was hitting, and nothing shy of a bullet will make it through that. Great review Gents 👍🏽

[@xxDev5000xx]

Great video guys missed it the first time thx for reposting

[@mattjack3983]

S5 is some incredibly tough steel. Its some hardcore steel for sure. That was very surprising that you were able to sharpen it that easily. Normally tool steel is difficult to sharpen and takes some effort to put a proper edge on. I figured that it would be seriously difficult, and an absolute pain in the ass to make sharp. This was an all around incredibly impressive review. This is the kind of sword that you want to have with you for the freaking apocalypse!

[@hawkknight4223]

Awesome video! God bless you all. Always looking forward to the next one.

[@carl8752]

Should look into more "obscure" less readily available tool steels. Its no accident that industry still uses steels as opposed to other wonder metals. We perfected it to suit whatever need we may have.

[@MrDracolucassos]

I want blunt reenactment sword made from this steel- it would be basically indestructible for the purpose

[@elephantheart9988]

I'd like to see this compared against a sword made of AR500... which I believe to be the superior steel.

[@elephantheart9988]

With my Mosin Nagant 7.62 x54, steel core FMJ rounds, ducking behind my ex girlfriend's car, I shot a 1/2 inch plate of AR500 steel at 25 yards. Now, when we shoot other steel plates (regular mild or carbon steel) that gun will punch through almost an inch of steel without needing the steel core rounds. But against the AR500 plate the bullet simply exploded and scratched the paint. The plate did warp slightly, as it was mounted on two sides and shot in the middle, but there was no impact dent at all. AR500 is used as abrasion resistant lining for heavy industrial equipment, like bulldozer liner. I'd love to see it made into a legit katana. *however I'll say that AR500 is definitely much harder to put an edge on than S5

[@steelwasp9375]

It's a brittle armor steel. It's shrugs off weak stuff but if it's is too much it'll chip, crack or snap. It's one thing when it's a solid plate that can absorb much impact as one piece. But if it's something less, or it has to bend... Totally unusable for a sword, is my guess. I mean, I would like to see it too, if anything, to see how it compares. But I wouldn't wanna be the one to swing it.

[@Ranstone]

AR500 has no place as a sword steel. You can break it with a curbstomp if it's thin enough. Hecc, it isn't even used in modern-generation body armor anymore. It's just inferior. Too heavy, too brittle.

[@elephantheart9988]

@@steelwasp9375 thanks for the feedback! you're probably right. It may not preform well as a thin blade. Still def wanna see it. And yea the person swinging should wear protective gear probs.

[@edwardscott3262]

​​@@mikeboyce21AR500 isn't that hard. It's Abrasion Resistant plate at about 500 brinell hardness. It's not even armor steel. Though ironically our common and cheap AR500 is way better than any WW2 armor you can name. Long before it was ever used for rifle targets or body armor it was used in industry for decades. For it's original purpose.

[@SuperSky9]

OK, FOR THE RECORD - The sword Zoro holds in his mouth belonged to his childhood friend - Shimotsuki Kuina, who was 1. not allowed to a swordsmen because she was a female (tradition) and 2. Died as a child. Zoro carries her white sword as a way to carry her memory and dream on his journey to be the best swordsmen. Zoro holds her sword in his mouth out of sheer respect and also only uses it as a primary as a last resort (One sword style). The sword he raised after "being slashed" at the Baratia was Shimotsuki Kuina's sword.

[@Heulerado]

I just imagine, after around 10-15 years of using that sword in his mouth... _The smell..._

[@Antelieris1]

It's called Wado Ichimonji.

[@random.3665]

@@Heulerado You know you can wash the wrap of a katana, right? Which is something that zoro, who respects his blades immensely, especially that one, would do.

[@klavspajuste2484]

Guy, you create great content! Love your work. Have you considered reviewing wood splitting sword?

[@alexandresartori2000]

Very nice review. But if you add a microscope 🔬 view of the edge, it would be awesome! A not expensive one with a cellphone can get awesome images. Or some cellphones have the "macro" function on the camera...

[@renegaderonin1247]

I would love to see you guys test the durability (or lack thereof) of a 1935 Type 95 Shin Gunto officers katana because I've been told they're pretty poorly made but im too afraid to test my personal one

[@samblackwolf7926]

That sword is insanely durable, holy christ taking chunks out of stone wasn't a thing i thought i ever see any sword do!

[@himanshuwilhelm5534]

17:50 A few months later, shad turns up with an s5 long-sword. In other news, an unidentified body turns up, decapitated.

[@Tinytraveler]

I legit just started the cartoon series a few days ago, I've got 402 episodes to go lol

[@torchlight1785]

You watched like 600 in like three days? How?!?!? Or did you use One Pace?

[@joeljohnson4512]

Me watching the car door ..... crying Simpson's style ...."Make him stop!! Stop, he's already dead!"

[@AlphonsoFrett-xz6pi]

I greatly and gratefully appreciate your excellent video 😅

[@yepperdeedooda]

I thought that said enema for a second there and boy would that not be good.

[@ObservingLibertarian]

Now we just need to convince Tyranth to put a fresh grind on the sword, just enough to get rid of the chips and dings, resharpen it, turn it into a Scimitana and Shad will the happiest nerd to have ever nerded.

[@Elhazzared84]

Welp, we've found adamantium. Call the dwarves!

[@Twiska]

I want a mace or war pick made out of this. Then we can see if you can destroy the stone.

[@elishaberry611]

That is some high-quality steel. Absolutely phenomenal.

[@random.3665]

Love the content, but as a one piece fan, i have to say: Enma isnt specifically known for its hardness, its known for its destructive properties, along with the difficulty of using it (since it drains the users energy in order to become more destructive). The sword Zoro used to have before Enma, Shusui, IS known for being incredibly hard, to the point that it wouldnt bend if a dinosaur stepped on it.

[@embee7434]

Liking once again just for that kickass intro. I'm sure the video will also be awesome. 😉

[@WorldofElsuon]

The steel is flaking but not chipping. Very interesting. Great video. Thanks.

[@noahsibahi-jackson8757]

Tyranth’s new hairstyle is looking clean 🔥

[@christophernazon7279]

You should do a video testing it after you sharpened it yourself to see how good of a edge you can put on it

[@user-lw4gp2xw6t]

That's amazing I have never seen a sword hold up like that thank you gents for reviewing this sword

[@markthintie5132]

I am impressed. Yes make a Long sword out of this material :)

[@cuttingedgecomix]

These are the kind of swords that could ACTUALLY cut bullets instead of the other way around.(take my money meme here)

[@user-pn9ho1my2u]

well this is nice to see i wish i had all my smithing stuff i made an ax and a few knives with S5 , i think ill get some new smithing tools and try to make some swords with s5 ...

[@bombchus]

I would like to see a swordbreaker made out of this steel. You could make it even thicker which should prevent the teeth from breaking so easily.

[@mattdefreitas525]

I really like the look and colour of the blade, looks really unique and nice

[@deejayxcrypt]

12:25 That why it’s called “shock steel”? It doesn’t break on impact so easily but one can grind it down (whetstone).

[@chrisruzsa2798]

This would be awesome in short blades like daggers or short swords possible falchions or machetes ext. shad they do have long swords too.

[@Aufsammelkabbler]

Wow, that is simply incredible! This one is realy tempting to buy... ; )

[@npuzio1]

they now have an S5 Longsword!! check it out, I just saw it while seeing this katana on their website!!

[@holy_knight]

That ain't a katana that's a fancy hammer

[@Untolddead]

I'm glad they tested sharpening because that's something I was wondering. Though I'm curious how well it keeps the edge.

[@Kokochocomouchoco]

Well, not that well considering how the sharpening went

[@lanigirognithemos]

I saw the title and was like I don't know if it's click bait or not but can't miss checking it out and I must say, I was watching it on picture in picture mode while drawing so it was on small screen but when you were hitting that stone I switched to regular view cause I wasn't sure what I was seeing. I must say it's steel hard to believe (see what I did there ;) that this is real! Great video guys keep up showing us fantasy merging with real life! 😃👍 btw I wish you took more time to see how long it takes to bring it to proper sharpness again and test it a bit more but overall unbelievable results!

[@pirminzemp2731]

Awesome Video Greetings from Switzerland 🇨🇭 Pirmin To Australia 🇦🇺

[@adamlanglois563]

Thats pretty wild! It looks like one of those S5 blades could last a lifetime even if you use it regularly

[@pkonneker]

That was seriously fun to watch.

[@y-sosirius5337]

You should check out Howard Clark and his L6 bainite blades. Nigh indestructible.

[@knownas2017]

That's genuinely amazing.

[@RaydeusMX]

That's awesome, now the question is whether there's any reason to buy a sword/katana made of any other material now.

[@MiTheMer]

Fascinating! Too bad their shop seems to exclusively deliver to the US and not Europe at all?

[@Jaedeok82]

Contact John. They absolutely ship to Europe.

[@christineshotton824]

Give it t to some of the employees I've supervised over the years. They'd somehow find a way to break it on a lump of soft cheese.😁

[@DanielMatthews-ql3wf]

I have a marine issue combat knife I have used for everything I even used it to cut the top off a 55 gallon drum.

[@eu.mesmo.godofredo414]

"Don't believe me? Check this out..." *Proceeds to cut a mountain in half*

[@BlackCap784]

@17:50 i just checked their website also looking for it, so i'm guessing you folks missed it at the time, but there is an S5 steel longsword there..... i know you want to get it. because i wanna see it slammed onto some stones.