UNDER $200 for STAINLESS STEEL FRETS and ROASTED MAPLE NECK!

[@binshuo]

As a native Chinese speaker, I can definitely see how these description are translated literally from Chinese. Kinda hilarious

[@arlizan6473]

How's the demo translations going for the Yako/Zhangzhou Fender Squier series or the Qingdao Epiphone line, is that "All American" company narrative still enchanting the... King's English audience?

[@qz2026]

I went out and purchased one from Amazon. They were out of inventory so the order went directly to China. It took almost a month to receive. And I am totally impressed... A very minor intonation adjustment was required for the top E string. And, after playing it, my fingers turned black. I tore the whole thing down to inspect it and to change the strings. No further adjustments were required. The inside is very clean and organized. Pots have no issues or noise that you mentioned. I could not get a good signal from the bridge. I then realized that they had plastic over the neck and bridge pickups but not the center pickup. Once removed, everything was good. I'll tell you, this guitar plays and sounds better than any of the Squires or Harley Benton's that I own. I'm really impressed.

[@che2335]

$200 to crush your enemies and see them drivin before you is a bargain in any land.

[@jasonmiller3167]

Conan, what is best in life?

[@jamesthe-doctor8981]

"...and to hear the lamentation of their women."

[@courtney5796]

I noticed the t-shirt 2 seconds before that line. lmao

[@garyosborne8642]

@@jamesthe-doctor8981 Yes. That is good.

[@Walks-With-Pride]

I think so too

[@geoffreynedelcu9400]

Eart also sells a headless guitar with a bridge that can switch between fixed and tremolo with a switch, I'd love to see a review of that guitar

[@generalawareness101]

I saw that. One thing I wish they would make would be a thin neck guitar with a compound radius from 9.5 (or for me a 12) inch radius to a 14 or 16in one. Make it 24 frets as well sub 300-350 USD, and sold.

[@superblondeDotOrg]

WOW really? That sounds amazingly cool, headless with tremelo ...

[@bobtimus]

Me too! Someone has one for sale near me and I'd love to know if it's any good.

[@generalawareness101]

@@mk7073 I do not like their headless and the Explorer is already more expensive than the RG421 from Ibanez with the Wizard III. $329 vs $299.

[@AMPx99]

I bought this guitar awhile ago and am super impressed. Other features to keep in mind that didn’t really get highlighted in the video is that the guitars have a matte finish, enormous cutaway behind the lower horn, and a bridge that feels nice and weighty. These are a steal and I wouldn’t be surprised if we have another monoprice amp situation on our hands

[@generalawareness101]

Yep. I am unfamiliar with that amp situation but I get these are all being dropped at sub prices to gain market share then a hefty jump in pricing.

[@jamesthe-doctor8981]

@@generalawareness101 possibly, unless they take the same direction as Firefly. Still $165-199 (as of the most recent lot) and no signs of a big price jump. Yet.

[@generalawareness101]

@@jamesthe-doctor8981 I already read from them directly that there has been a price jump of 50 USD since Oct. I also saw a review video that said each time a reviewer gives them praise they seem to jump up in prices for good and in China they are considered first class guitars of about 700 USD equivalent, but the same guitar on Amazon is only 200 USD. As I thought, and this one reviewer said too, they are dumping to gain market share. SO, get these while the pricing is so good.

[@jamesthe-doctor8981]

@@generalawareness101 that’s great info, thanks. Great name, too.

[@blazinkid5178]

Is the neck actually a roasted maple? Max didn't show us the back of the neck, unless I missed it, and that headstock is pale

[@Clintthecoolguy]

Just hearing you translate the description on this is hilarious to me. Worth watching just for that, haha :)

[@ericbrewerguitar1499]

It’s a mixed radian man! What more do ya want? Ha

[@BOBANDVEG]

@@ericbrewerguitar1499 I was impressed by the flux capacitor

[@thai7em]

I think the last spec where it says "rear wheel rotation regulating circle, built reinforcement", they're talking about the truss rod adjustment wheel being at the base of the neck rather than at the head. What a solid instrument for sub $200!

[@generalawareness101]

Precisely what I thought when he said it. One thing I do not like with the guitars they make is that horrible truss rod adjustment in the body. I never liked that in guitars as I prefer them in the head stock.

[@thai7em]

@@generalawareness101 I've never had a guitar with the truss rod at the base of the neck, so if you could let me know what your experience with them is, I would appreciate it! Thanks in advance :)

[@generalawareness101]

@@thai7em I find them very clumsy and normally a require bigger tool then the standard neck one, and that makes it hard to adjust with the strings on.

[@83roadstar]

@@generalawareness101 To make truss rod set-up and adjustment more convenient, Warmoth "Pro" Construction necks feature the Gotoh side adjustment mechanism. Inserted between the usual truss rod adjustment nut at the heel and the truss rod, this ingenious …

[@83roadstar]

@@generalawareness101 All is needed is a 4 or 5 mm allen to turn the wheel , Stew Mac sells a conversion kit for under $10.

[@carlbaumeister3439]

I’ve regained my faith in humanity. So many guitar companies are neglecting rear wheel rotation these days . . .

[@Calebooz]

I wonder if that's a reference to the truss rod adjustment. It's a terrific feature, and it makes this guitar even cooler. Suhr and Kiesel, also do. it's a big improvement over Allen keys.

[@Jester-Riddle]

That might well be a screw adjustment for neck angle, or body end access to the truss rod ... I think the rest of that sentence referred to bolt-on Neck ...

[@backwater_j]

@@Calebooz It definitely is. It's clearly got the neck base wheel adjustment, kind of a cool feature from a tech standpoint even if it's a bit clunky-looking.

[@Metro_Gnome]

I have this identical guitar. It's a two way truss rod. I'll admit, it works, but it almost feels like the roasted maple doesn't want to move like a normal thin RG neck would. You have to make small adjustments and wait 48hrs to see a slight change😂

[@Stratisfied22]

I just got this guitar a couple of days ago. I can’t believe this is what you get for the money. This is no doubt the absolute best deal in guitar that you can find today. Nothing else even comes close. The best fretwork I’ve ever seen on any guitar I’ve picked up which is insane. The action is so low with no buzz and the roasted neck feels amazing. Fender should be ashamed. This guitar blows it away. The value is unprecedented. I do wish I could be saying this about an American company however but I’m giving credit where it’s due and Eart guitars is doing it right. This is the first guitar I’ve bought brand new that didn’t have something wrong with it. My Charvel dk24 with roasted maple neck has inferior fretwork to this Eart which I’m pissed about and that’s a $1000 guitar. I even bitched to Charvel about it. Get some of these guitars before the prices go up is my suggestion.

[@GuitarMAXMusic]

Wow! Thanks for the report!

[@Gene_Cali]

Your guitar has a Carbon Fiber truss rod too..many options got lost in the translation. This really is a premium guitar.

[@Stratisfied22]

@@Gene_Cali I didn't know that thanks for the info. Didn't think it could get better than it was. Lol

[@Peasmouldia]

After 50+ years of calling them tuners, from now on I'm calling them "reel turbines"... Thanks Max.

[@SrDeMaFp]

😂😂😂 Shit! Me too!

[@catsmeow971]

HAHAHAHAHA

[@Rikamortis6stringer]

ha ha ha

[@50gary]

They used to be called "Machine Heads". I agree reel turbines is way cool veering perilously close to wind turbines though.

[@moneyonline.a]

I can see where reel comes from,like a fishing reel winds the line on,like tuners

[@greglong6316]

Dude! Awesome timing. As I write this, I'm waiting for the HSS $350 version of this guitar. Not much one the web about this guitar so it's good to see one of my favorite KZbinr do a review. Keep up the good work!

[@DeakonLekross]

Eart really does make some of the best necks I've played on, to the frets to the radius to the profile is all great! I'd love to try this strat style as well What a great sound on the demos as well! 🤘

[@GuitarMAXMusic]

Thanks dude! And thanks for opening my eyes to these guitars! \m/

[@EbonyPope]

@@GuitarMAXMusic Goes to show that not all Chinese guitars are crap. Your made a video about another Fender. I think the title was something about if Fender should be worried. It's from 3 years ago. Do you know the manufacturer? Could you give me a link? Thanks in advance!

[@martinsander7112]

135,000 subscribers. I remember when you were pushing to get over the 75,000 I think it was. Hard work, great videos, and those flowing locks have brought you a long way. Those frets are just downright impressive. The pickups sound very smooth clean.

[@ryanentereso1810]

rear wheel rotation is for adjusting truss rod, at the other end of the neck(near Pickguard)

[@GuitarsZnuff]

Dude, your picking hand is incredible.

[@ncc74656m]

I'd definitely love to see the Tele reviewed.

[@kirkbolas4985]

Thank you for reviewing this guitar Max. I had to sell my 1999 American Deluxe Strat to help pay rent d/t ongoing COVID unemployment and when I can replace it, I think this EART Strat clone will be the one.

[@BoltRM]

Honey, I don't have GAS, it's a savings account! 💪 I'm just thinking of us...

[@craigharrison5406]

I have 2 EART headless guitars that are Strandberg knockoffs and they are fantastic. They retail for $300 US and the quality at that price point is insane.

[@mrsandman3954]

Would like to see the pots, caps and wireing under the pickguard. Does sound great though!

[@kennethm.3296]

Korean alpha pots and a epiphone jack and ceramic pickups. It’s HSH routed. The route is pretty shallow and will barely take a fender 5 way switch. So I left the import switch in it and the space at the top nut is too narrow but all in all it's a steal!

[@bluwng]

@@kennethm.3296 those 5 way switches are 1950 s tech and the only reason Leo chose it was because it was readily available. How in the world guitarist think this is superior is beyond. The lack of science and technology guitarist show blows me away. They do love superstition, tone wood , fret board material….. a pickup is a magnet, it’s a magnet, go figure out why wood should make a difference.

[@kennethm.3296]

@@bluwng yes we do and for good reasons

[@martinkrauser4029]

@@kennethm.3296 well, you're half right, it is for reasons :D

[@fighterx4133]

Just got mine today. Not sure the neck is really roasted but it feels great and after some tweaks with the set up has decent string height and playability now. The fit and finish is really good and overall it is really worth the money. I'll be putting through its paces over the next few weeks.

[@richardsandson]

Sadly a common complaint of the stainless, pre-dressed frets, is that they are not levelled after installation. Buzz city. That's not dissimilar to a lot of cheaper guitars though, and they can still be levelled and crowned. The guitar landscape is changing over night these days...

[@malcolmhardwick4258]

Yes check all the guitars out !

[@RickFoxx777]

Thank you for doing such a great job on explaining the features on this guitar (most individuals leave out the neck shape, which is of MAJOR importance to me). The guitar looks and sounds great (kinda funky headstock...but most in this price range are) and the pups sound really good. The only disappointing thing I heard from you is that the neck on that guitar is thin and good for shredders (not a shredder myself). That's a real shame to, because it's hard to find a 7.5 to 9.5 compound radius neck anywhere in any size. My hands are average size but I still need a soft V or a mid sixties C for my comfort. So If I bought this guitar I would re-paint it, relic it and change the neck to a Fender 50s Classic Player soft V replacement neck (which even though they jacked the price up another $100.00 it's still my go to neck for builds) and still walk away with a great guitar under $600.00 (something I have done many times and for many years). Thanks again.

[@gushutchinson8758]

You're a very funny man! Total full on crazy manic soloing followed by a super slow calm description ...it's the unexpected contrast which is one of the secrets of good comedy

[@DarkMatterEclipse]

Was on the hunt for an SSS guitar (my guits are all humbuckers) and prefer fast necks. Stumbled on this in a poorly lit pawn shop, it had suffered cosmetic damage during shipping. Asked the storekeeper to google specs and for some reason wouldn't click Eart's site just amazon, only determined the body was mahogany. Could tell the thin neck was a little dark and the frets were smooth with rounded ends. Picked it up for $70. Was surprised when I got home realized it had a baked maple neck, seemingly stainless steel frets and a heat treated body. Eart's site says 24 frets but it's 22, says nickel/silver then says stainless steel frets. The neck can't be much more than 19mm thick at the 1st fret, rare on a strat type guit. There's no shielding in the cavities, doesn't hum-cancel, cheap electronics, nut, bridge and tuners but hey, easily remedied.

[@jimmystephens4011]

I would love to see more of the guitars. Enjoy your show!!

[@hugopalomares146]

The frets are rounded before they are put on the neck. They put the rounded frets on and then sand the wood down. This how it’s done at least by the guitar company that I work for that I am not sure if I can say that I work for.

[@SilverMusicAndGaming]

Can you please tell me what company

[@timboggsdotcom]

"...the line increases high frequency compensation..." sounds somewhat like it has a Treble Bleed. I just ordered one, I'm sure I'll take it apart and have a look.

[@deandee8082]

yup, treble bleed

[@Darkseidx]

I believe they also make a Sabre style/ SA series model I'd love to get my hands on. Averaging around 380.

[@50gary]

Owkay, (chinese guy spelling) forget the guitar, your voice (first time viewer here) is amazing. I like the EAR-T guitars thus far, I may buy one at some point? EART is an acronym that they explain in their web site but I pronounce it kinda like the logo on the headstock EAR-T the T is separated by being in red so.. makes sense to moi. Great playing too, BBQ neck appetizing, for those tasty licks.

[@Gene_Cali]

Since it's in China "ear-tea" is correct.

[@frankb518]

That fret board and Fret work is Amazing!!! I agree with you on the " PreFiled and rounded fret ends" ! Nice Close up on that Max!

[@DoubleDguitar]

I get it...it is EART Day. Nice.

[@probabvieh]

😮😂

[@Jester-Riddle]

Get 'B-Stock' for your Beart-day ...

[@probabvieh]

@@Jester-Riddle😟😂

[@robinleebraun7739]

Fred Gwynn in My Cousin Vinny, “What the hell is a YUTE!?”

[@gregperkins7723]

6 mos ago I had custom shop les paul, custom shop tele, gibson 335 figured, and a PRS Silver Sky core. Now I have 4 Earts and couldn't be happier.

[@soundman2907]

Love the channel, man. There's something funky going on with your audio in this video, your voice keeps panning hard right and then back to centre.

[@stephanematis]

Can you please confirm SS frets ? Max from Max Solo guitar normally uses a nickle fret and tries to score the guitar's fret, if it leaves a mark, not stainless. On the Canadian site for Amazon, it still shows "High-hardness nickel-silver anti-oxidation, rounded crown ball head, no hand injury" :) Oddly, they updated to Stainless on the US site. Hmm. I own a pair of other EARTs, and they are quite good at fret quality. I can recommend the headless without trem and the 335 style.

[@jeffadams525]

Hey max hope all is good with you man .I really enjoy your channel man don't get frustrated. Over stupid comments. Your one of my favorites dude keep shredding. And making killer videos your loyal watcher

[@jeremykopatz4760]

I was looking for a cheap stat and I was about to go Harley Benton but I am glad I saw this in time. Stainless frets... I will take that over HB's standard frets any day. I just bought the blue one and I will edit this if it arrives in condition different than what Max experienced. Coming on May 5th!

[@SsWargazmSs]

I think they're referring to a high pass filter on the volume nob as well as the spoke wheel truss rod adjustment.

[@BonJovi1987Fan]

The wammy bar is angled like a floyd rose tremolo arm and I love the angle of degree of the floyd rose tremolo arm.

[@jeshely]

In 2006 I put SS frets on my 1995 American Standard Strat and I really like them.

[@littlerhodyguitar2169]

The discription was hilarious. Cool video though, but the Conan shirt is epic!! Be well Sir 👍

[@timothyoo7]

Thanks Max! I think that this might be my next guitar? I really appreciate your videos, they are some of my favorites in the guitar/music review category. Your video of the Ibanez S470DXQM convinced me to buy one that I had found on Ebay. It has some great upgrades, including active EMG pickups and a boost switch. Keep up the great work my friend!

[@bacongl]

I got the 6 string headless W1 and im in love with it. EART is one of my new favorite companies for budget guitars.

[@flamingwarpigz5105]

I got one a few months ago and its pronounced Art*** best guitar i've ever played on in a while. including 1000 dollar guitars. it feels super fantasic and easy to play!!! Highly recommend it

[@thejusticeization]

All guitar manufacturers should be doing the frets like this. don't know why they haven't

[@gw2031]

They can't use the theory that they need them to wear out so we by more lol,, an extra few pounds for stainless steel frets that last 20 years!

[@Jester-Riddle]

@@gw2031 It's the same reason why Car Exhausts are not Stainless Steel as standard ... An entire Industry reliant on them needing regular replacement ...

[@JeremyBorkat]

The main reasons are that it's harder on tooling, more expensive to make, and takes a bit more time to finish properly.

[@thejusticeization]

@@JeremyBorkat the guitar is 200 dollars..no excuse for the bigger manufacturers

[@JeremyBorkat]

@@thejusticeization Totally agreed. I don’t know why everyone doesn't do it, but every guitar or neck I've purchased in the past 5 years has had stainless.

[@cjm3122]

I admit that I am a Gibson snob. I love the SG and dreamed all my life about a $3000 SG I once played in a store decades ago. Thanks to these videos, I finally bought the EART EG LP-511 for $400. Out of the box, that neck played just like a $3000 guitar. I feel like I found the Hope Diamond at a tag sale. Also, I think its pronounced EART, like Wyatt Earp

[@EbonyPope]

@CJM I can't find the LP-511 online. Could you provide a link? Thanks in advance.

[@Metro_Gnome]

I have the EXACT same guitar. It actually has amazing pickups, too. Had to file a few frets down slightly but he's right. It's gorgeous and sound incredible I. The neck position.

[@nychold]

"...the line increases high frequency compensation..." Treble bleed circuit?

[@Jasmine-Jeane-H]

If that maple neck were charcoal grilled in Canada it would be wrapped in bacon.

[@Walks-With-Pride]

The brand name EART stands for Electroacoustic Art. They are manufactured in China. I believe that the electronic components are from Korea. Like Shijie Guitars, they are sold primarily on AliExpress.

[@rob8482]

Damn man, you lit that puppy up! Cool stuff!

[@amranard]

Max clarifies confusing descriptions. I would watch that series! :)

[@barryprosser1370]

Any of the models would be really cool to see reviews on of this brand. Keep up the great work Max! \m/

[@dananthony6258]

Wow I haven’t watch his videos in a while, he got a lot better . Very cool man. He’s becoming a true shredder no doubt.

[@rogerd9150]

Becoming? I think he is already!

[@MrGixxer1300r]

As always awesome review, with some great comedic value. I'm thinking this would be a perfect guitar for my 12 year old grandson who just started playing. It's a great guitar he can grow into, and later a nice mod platform once his playing gets better in a couple years

[@GuitarMAXMusic]

Go for it! This would be a great choice for that.

[@kingrein5780]

Great review as always! I purchased the EART W2 (fixed bridge) Headless Guitar (Black) and did a little review of it, but as someone else commented, I would also like to see you review one of their headless guitars too. I noticed the price has gone up 5% since I purchased the guitar last month.

[@SoCalGuitarist]

Oh nice, I’ve got superstrat pick guard all set up, just need a body to put it on. Sounds like this would be a fantastic body for that! Edit - damn, y’all move fast! Blues are completely sold out! Ended up going with a tobacco sunburst option instead. Thanks for the video Max!

[@rondobondo6600]

I got my eart strat and let me tell you that this guitar plays amazing I love it ... This is a must have... I just ordered a tele style eart can't wait... Max can you check out the tele eart..... Again thank for sharing Max...

[@kevinarmstrong2592]

I've had my eart telecaster for about a week. I have to say I'm blown away. I can't believe I got a guitar with stainless frets, spoke wheel truss rod, compound radius, and an amazing sound for under 300 bucks. By the way according to their website it's pronounced "urt"

[@GreyMatterStew]

Ok. I sent this video to a friend while talking on the phone with him. He trusts my judgement, and I trust you, so he ordered that same one on the spot. It's just as fabulous as that one, and yes, it's very minty. He loves it. Just wanted to give you an unbiased opinion.

[@GuitarMAXMusic]

Awesome! Thanks for the report.

[@74dartman13]

I have a similar color and style guitar. I didn't like my pickgaurd, so I bought and installed an aged perloid pickgaurd. It looks awesome with that color!👍😎🎸🎶

[@jimmyz2098]

7:50 ...... Great Mother of Pearl.... Holy Creatures everywhere. That tone. I mean..... dayyumm!! Guitar seems really cool - and an absolutely bargain. I might have to check this bad boy out.

[@DanielRodriguez-eh1qd]

When you do ball ends on the frets you have to do them before putting them on the fretboard. At least that’s how I do it and I couldn’t imagine being able to do that while they’re already installed. As long as you have a set of calipers there shouldn’t be any issue rounding them off before installing.

[@DanielRodriguez-eh1qd]

@GOD&GUNS interesting. I’d be too worried about damaging the fretboard. Plus they’re so much easier to get done beforehand. I can work the file over much quicker without having the neck in the way.

[@DanielRodriguez-eh1qd]

@GOD&GUNS highline guitars got me into doing them that way. I originally followed how he did them with the dremel and sanding wheel. But after getting inconsistent fret ends with that method I just use my baroque fret file and I get a nice ball end. After I get the end shape I want I just keep shaving off little by little until the width matches up with the caliper measurement. Once you set them you can start leveling.

[@jagged_little_phil]

For me, it came down to Fender or EART, and since Fender can't guarantee no hand injury, EART it is then!

[@sassystylist01]

I’d love to see this brand do a super strat style version with the same neck and body (maybe banana headstock though)

[@typhoolin]

They have a bunch of other models beside this one. Many of those are above this model. Thin body Strats w/ Floyd Rose and also Headless guitars too.

[@Gene_Cali]

@@typhoolin Hiya Paul, Yes I just ordered the EART Red AL1986-S with F.Rose Trem. HSH Pickups. Secret Weapon Guitar. I just pronounce them Like "When you buy EART, you wallet won't hurt!"

[@typhoolin]

@@Gene_Cali - Awesome! Let me know what you think of it once you get it!

[@rockboy4470]

they already have a super strat. check out amazon.

[@eldritch6871]

@@Gene_Cali I don't see it anywhere, even when I try searching for it

[@thetownspeople6486]

I’d like you to check out as many guitars you possibly can. I love the discovery of the brands you find, this one, Wolf etc. and would like your review on guitars we might all know. How good is this year or model etc. and dig deep. Interesting pickups. Or other electronic things. Anything and everything guitar. They don’t necessarily have to be cheap either although I love hearing about the quality in today’s inexpensive guitars. Keep up the good work. If you haven’t yet, check out some Xavier and Slick guitars from Guitar Fetish. Both are supposed to be good deals. Let’s find out. And when possible not a Strat or Tele or Les Paul knock off again, when possible. I only want to own a few of each of those models lol.

[@BUNKERJR53]

I like to see you review more of these guitars. Your choice. They are definitely a lot of bang for the buck.

[@AlanCheong]

the neck doesnt look like it's roasted from the pics on amazon. roasted necks tend to look dark but this just look like regular maple. maybe it's just kiln dried, like most necks. kiln dried still requires an oven, perhaps that's where the charcoal reference comes from. does it look roasted to you in person?. the truss rod adjusting wheel at the bottom of the fretboard is a nice convenient feature as well and not commonly found in budget or mid range guitars.

[@breevwhyman2985]

Max, this seems quite a quality instrument at that price. Thanks.

[@SpiceofLifevariety]

Been watching your channel since the spiky hair days and reviewing rondo music stuff. This is the first time I ever bought one of your recommendations. Thanks bro. This thing is sweet and I consider it to be my budget "Ibanez az"

[@ericbgordon1575]

It looks almost like a budget Tom Anderson strat, not hurt by your Dawayne Bailey-esque playing style, Max. A demo of a headless model would *kill it!*

[@RodrigoRockChannel]

Looks nice... liked the suhr style headstock... in that price range, its a no brainer

[@Earthshaker1965]

Beautiful Strat style guitar... Beautiful everything!!! At 8:00.... I could definitely hear some George Lynch emerging!!! 😎👍🎸

[@ilovejapanesemusic3858]

I'd love to see a review of a headless guitar , I really don't understand what I'm seeing there when I see one in a video. This brand sounds like an excellent brand ! I really enjoyed this video 👍🏼

[@austinfailz]

The "high frequency compensation" is probably referring to each switch selection being less bright, I'm guessing.

[@willwilliams7491]

Precisely what I thought.

[@andrelp9596]

Great review, If you could review the HSS at some point would be great! Thanks

[@louisstokes1898]

Yes check out some of the other higher end guitars from EART

[@mikkosutube]

would have liked to hear how the tremo works..or if it stays in tune after using it..i would guess not since there is no locking nut..

[@louisanthony266]

I think they make a headless strandberg style as well. Pretty cheap on Amazon.

[@andyzaluski]

I purchased the Eart headless model and I love it. I was looking at Keisels but the price tag is too much for me. If you are thinking about buying an Eart do it.

[@mdwayne741]

Always fantastic information....thanks, Max!!!

[@MarbsMusic]

Thinkin' of picking up the HSS to test out, great review!

[@Metro_Gnome]

Omg sorry Max I've been watching your vids for years and hadn't subbed yet! Subbed. Okay fixed that. You're seriously one of the most talented guitarists on KZbin and that's saying a lot. Keep doing what you're doing- you're an inspiration in terms of spot on rhythm playing and perfectly-timed runs. We all appreciate your mastery of our mutual 6-stringed buddy.

[@Jamaicangurl81]

I have their telecaster... super impressed with it

[@richardavila5410]

Yes...more Eart guitar reviews. Do they feature any Es-335 style axes and Semi-hollow bass guitars, preferably short scale, like Sire and Harley Benton? Headless Strandburg style would also be great...Thanks Max !!!

[@Gene_Cali]

EART even has a cool Guitar Called the EAT-1. I had to help them with a few upgrades to their ebay and amazon sites. They are new in the ways of the West. Thanks for reviewing them.

[@rb032682]

Wow. The neck alone is worth $200. Roasted maple, compound radius, stainless frets. Very cool.

[@Gene_Cali]

I own two Eart Guitars and love them...the quality and options make this guitar a great deal. Rear wheel means Spoke Wheel type truss rod adjuster. The Frets are Stainless Steel. they use quality electronics. I like all the People at Eart. If you Buy a Guitar from them, they put your picture on the wall of the factory. Thanks for this video. The Tones sounded excellent. Please Review the Headless Guitar. I have the Tele NK-C1 ( my favorite) and a Les Paul.

[@blazinkid5178]

Can you assure us that the model shown here does have a roasted maple neck, as a buyer? Max didn't really show the neck here.

[@Gene_Cali]

@@blazinkid5178 I didn't buy his model..I got the tele style and it indeed has a roasted maple neck and stainless frets.

[@helloitsme9081]

Just checked Amazon. They have a small, but, awesome selection of Earth guitars. Well worth the look! I wish I knew a couple of months ago before I purchased my beginner's Strat.

[@johnbrasher1495]

More Eart guitars, please. For sure, the Tele and 335. Would also love to see you review some of the Inyen Vina (IYV, but have to search for "IVY" on Amazon) guitars. I played a strat style and thought it was fabulous for the price. Thanks for all you do!

[@mrlionel1965]

This video is exactly why I love this channel!

[@GuitarMAXMusic]

Thanks!

[@The7thEmergency]

"I'm imagining someone with a Weber...you know like a BBQ grill...". 🤣🤣🤣. I think I might start calling all roasted necks "charcoal grilled". Another great find and informative video. You truly do serve the people. 🤘🎸

[@skullPUMP]

More than solid. I have this guitar and the Eart Explorer 1 and the quality is fucking mind blowing. Get one before they get high.

[@martinkrauser4029]

Thanks for this find! The fretwork has always been my biggest issue ordering directly from Chinese companies rather than through an import brand. EArt seem to have everything else in the budget market beat on this one metric.

[@twowaymuir]

Hey Max, thanks for reviewing this Eart Stratr style model. I received the Eart blue headless hardtail bridge w2 model last night and I am very happy with the quality of it. Plays great and the pickups are quite good. I recommend this brand for sure. I would like you to review their 335 style Semi-hollow body guitar.

[@bigchiefsmackaho387]

If you ever come across one you should try out an ANTHEM guitar. Theyre a brand under Chesbro Music Co that is now defunct due to trademark issues with the name. They made guitars for about 2 years under that brand and made some very high quality affordable guitars. I highly recommend their superstrat models, they play and sound amazing. They still exist but are called Teton guitars now and are a little bit more expensive than they were.

[@ToneD5150]

Hey Max, You could make a 5 & Dime store guitar that costs 29$ sound awesome! Luv your channel and your chops...!!! Glad to have subscribed 👍

[@desert_rat_guitar]

I bought a "EART Headless Electric Guitar fixed Bridge" last August. I could not figure out how the bridge worked. There was no "documentation" with the guitar. I emailed EART with very specific questions (like how to adjust intonation and how to restring) and did get replies, which were again mostly indecipherable or wrong. It did play OK but nothing special. Tuning required a little tool. The crack I found in the body near the neck was the last straw, and back it went to Amazon.

[@hughmoss9884]

Loving the Conan shirt, Max ! I'm curious about that hollowbody, on the site you showed. I see one on eBay, it looks beautiful, and the design of the headstock is great, with straight string pull. But you never know about things like neck dive, or if the humbuckers are good-sounding, and it has some secret hatch to get to the truss rod. Also cheesey how they wrote 'love rock' where some guitars would say les paul model. Though it's a 330-style guitar. You should be on primetime, or late night. Your humor is impossible to ignore ! Love your channel ! -Andy !

[@williamwest4824]

I'd like to see the telecaster model and an ES Semi Hollow. Great video