Underrated? Rockford Fosgate T1500-1bdCP Amp Dyno Test

[@wal]

Check for RF T1500.1bdCP Refurb Amps: is.gd/rft1500refurb Make sure you buy amp from authorized re-seller to get full warranty from Rockford Fosgate! Send me a few bucks if you want to support: paypal.me/BigDWiz My Favorite Screwdriver Kit: amzn.to/2FGD7dP Test Your Own Amps! SMD / D'Amore Engineering AMM-1: Amazon - amzn.to/2u2EgKV WCCarAudio - goo.gl/CVCgU3 Constant Power Technology Explained: kzbin.info/www/bejne/bXazZWBqibKKfNk Amps for Daily Driver Playlist: is.gd/dailydriveramps

[@ShawnScaggs]

BigDWiz I

[@rhoppyrhop]

You should do an Orion xtr 1500.1dz

[@jermainemcdonald2121]

Good day Mr wiz, my father gave me 2 rockford fosgate amplifiers the 55a2 and a 500a2 they are amazing amps, however my problem is that he lost the metal cap that normally cover the terminal and I am have a hard time to get them because I live in Jamaica. Do you have a link on how to get those caps?

[@Pittsburgh-412]

Jermaine Mcdonald here's a link to 3d printed end caps. They are plastic but looks nice

[@ceasrcastio9130]

Do a scv 3k review

[@iTz_RaptorV1]

I have a Rockford Fosgate t-1000-1bd not the bcdp model, and I've pushed it full tilt for over 8 years at 1 ohms running 2 p3 12" subs and it has never given me any issues. It is an absolute powerhouse of an amp and has never overheated. It's gotten really hot but never has gone into thermal protect mode ever. Truly na amazing amplifier

[@TellyKennyButters]

😂🤣

[@Finga_Trappa]

Something about running a Rockford feels so Coooool!! Still have my P325.1 from High School. My first amp that got me hooked for life!

[@Turdfergusson97]

Fosgates expensive and people always say “you’re just paying for a name” I just tell them to listen to my mids and highs that my t400-4 is driving and their opinions always change

[@joeymerrell8585]

I still have a punch 45 from high school running a pro punch 12. Loved that setup

[@justinkelsey9218]

My first "good" amp I ever had was a punch 550.2. I was blown away by the difference of 600 watts rms compared to the 150 watts rms i was getting from my "1000 watt max" lanzer max.

[@duke1977]

There so reliable knoc on internet wood i haven't had one failed me yet and I have been rocking them since high-school

[@alextownsend3264]

I ran a 45hd in highschool and a 1000.1bd now on 2 sundown 8s in my truck and you would think I have 15s

[@jacinshardlow2409]

Forever a Fosgate fan. Might cost more but they are reliable and they are just killer amps. My two cents. Cool vid Big D. 'I'm outta heeeeere..!!'

[@wal]

Thanks for watching and commenting 👌

[@dhestondh]

I love the fact that they are under rated

[@whikidfmj]

@@dhestondh so under rated they don't even include a remote with their remote capable 800$ amp🤣 those things are over rated anyway.

[@alextownsend3264]

@@whikidfmj don't speak of what you don't understand. Rockford is and has been building some of the best amps on the market for decades. If you could start with a punch 45 and work to current you would be a fan as well.

[@CDMitch]

My favorite sub amp hands down. I've had 3 and never had issues even during 100 degree temps driving multiple subs

[@cragercrager9377]

Cook a egg on them an never clipped

[@killabee623]

Before I buy any amp I come to this channel!!!! You cant go wrong with Rockford they the truth!!!

[@RudyM2024]

Have to respect the brand that started it all! Thank God for Jim Fosgate!

[@Contact_Info]

He sold the company like 30 years ago

[@poohwecampbell7799]

Yeah he must be young 😂😂😂

[@chawchaw420]

Thanks for all your input and videos on all of the OLD SCHOOL AUDIO, it keeps older dudes like me YOUNG...! Thanks a million...!

[@wal]

Thanks for watching and commenting!

[@williamwoolley2771]

Dude I don't care what anybody says you're the Best!!!! When it comes to any information on amps, power ratings,ect!! Anything you got to say is Good as Gold !!!!I'm a old school Bass head/SQ freak from back in the 90s.. Building a S/Q Van now at age 51... Love watching your videos at night. Keep up the good work Big D Wiz I'll always be a fan!!!

[@wal]

Thanks for watching and commenting!

[@lilshawn2]

Always loved the Rockford Fosgate amps. They have NEVER put out an amp with an output that was less than rated... always more...and a birth certificate to prove it. Thanks RF!

[@wal]

This is so true...

[@georgesrisomsak9650]

Sundown couldn't even say that. Might sting some of the fanbois...

[@ThisGuyDrives]

George Srisomsak it’s amazing how you’re hating any chance you get. 🤣 Try doing something positive for once with your life.

[@georgesrisomsak9650]

@@ThisGuyDrives quite down fan boy, your nutt huggery is distracting me from my warrented criticism.

[@optimusprimer4392]

That's because Rockford really cares about bass

[@mikeunivers]

and that's why until today these amps are still my favorites, love rockford fosgate .

[@izrael2321]

Thanks for making me a believer again..you restored my faith in fosgate again

[@wal]

I’m not on their payroll, but I am a certified #FosgateFanatic 😊

[@markheath6843]

Had this amp for over 2 years now. Running 2 first gen 12in punch hx2s. Had the subs for about 16 years now and they've never sounded louder! Never gets hot at 1ohm. Hours of play at a time! Building a custom enclosure soon.

[@slimbuick]

Keep em comin' Big D!! Love these vids!

[@wal]

Thanks brother 🤙

[@marvinavalos6384]

Rockford fosgate can't go wrong always good

[@wal]

Agreed 👍

[@volvo09]

I give them big props for not cheaping out on build quality as time goes on.

[@casemods]

verpriced..not .5 stable. Meh

[@cristianoronaldog.o.a.t4590]

@@casemods this is for sq not spl you don't need to go down to 0.5 ohms..

[@fishhogz6982]

Besides their subs. They are overpriced junk. Good sq though, but not good for output.

[@033Fritz]

Hands down imo the best sounding class d amp I’ve used on subs. I prefer a class a/b amp design, but I’d choose this again if I ran a class d. For the price vs actual power & in car output, it’s worth every penny. Big power, great test. Thank you once again D!!!

[@shudnadunat1476]

Finally an amp I own!

[@GlycerinZ]

I just got a P600X4 and its awesome!

[@MiguelHernandez-pq6gp]

Can't wait for the Rockville amp test. Thanks for your videos

[@mikewu9900]

I used one of these on a 13w7 wired to .75 for months. No issues except for the jl not liking all that power.

[@pimbysdesertcustombuildz3944]

I have a sundown zv4 D1 how can i run it to .75 on this T1500.1bdcp

[@ali19186]

Juan Macias I thn

[@ali19186]

Think you would go low as .5

[@ali19186]

Just got one and thinking about getting an amp

[@pimbysdesertcustombuildz3944]

@@ali19186 I tried it bro @ .08 ohms I believe and it ran like a champ!!! This amps are very powerful. But i sold it and now i own a Sundown SAZ 3500D and its the one they build here in US not the Korean ones. Im getting a Sundown Zv4 D1 this week I have my Custom box build already with a 8" aero port from Sky high Car Audio. Check out my Channel and stay tuned Ali. Hope you like what I have and what I build. Subscribe Me please Iwill appreciate it. Anyway i sold my T1500.1bdcp for $300 on offer up. Then I got my SAZ 3500D from a buddy of Derek from Sundown Audio for $450! I think I got a sweet deal for being the very first ones they build here in US. Then after so much requests they had to make them in Korea to manufacture more. But those dont do 18v like the one i have. Dont get me wrong they are still a beast but with cheaper parts.

[@savionsmith7418]

Some of the best amplifiers on the market

[@wal]

Tried and true in Meade’s vehicles

[@yoplaitmajor]

BigD, thanks for doing this test. I actually purchased one of these from SoundOfTriState. It's a monster amp. Can't wait for the listening tests!

[@wal]

SOTS is my new favorite web store 👌😬

[@frankk8681]

Where you from bro I get most of my shith there since 2000 these maps are great iv had about 10 over the years an the 2500s to not r1s t2s an t3s. I got to the trip state mall store where u go ? An if u ever met isaac back in the day that my homie

[@BadLantzMaru]

I picked one of these bad boys up to power my RE Audio 15xx. Love that they come certified from the manufacturer. My specific specimen hit 1924watts @ 1ohm. I've smelled the burn on a couple punishing tracks.

[@wal]

Man you got a strong one 💪

[@jedpratte]

Fantastic amp. Buddy has been running this amp for 10 years no joke and it still works good as new. His birth sheet at 1ohm was little over 1900 watts rms as i recall.

[@jefferyglover4295]

How did he wire his amp from the box to the amp? Cause that's where I'm confused on this amp cause I have 2 15's and I was wondering do I wire my 2 subs to the amp in a mono load( + -) or( + -/+ -)

[@thcwolfs2598]

​@@jefferyglover4295 I run both my 15s 1st + and 4th - for all the juice🤟

[@jefferyglover4295]

​@@thcwolfs2598Got you Boss I see what you're saying now 😂 the 1st + and last- on the amp to get all the juice 😂 I might need to get another one of these powerhouses so I can have 2 😂 that'll be enough clean power for me, thank you.

[@delandgoon]

my lady says why do i always watch these dumb videos . just love watching these videos to knws which company's give u best power for the money. keep em coming buddy.

[@trudeaumustgo1920]

Alot more to good sounding amp than just power. The damping factor is also very important

[@Luminous.Dynamics]

Getcha a new lady

[@bearxbunny1835]

Same!!! She calls them my "girlfriend" lmao she just don't understand

[@GlycerinZ]

Tell her nearly 3,300W from a 1500W amp! Knowledge is power :)

[@jasx1485]

Your lady crazy

[@devillenm5525]

I just left you a lengthy inspirational comment on the new cab video. Now I'm watching this video for the 10th time drooling over this amp. It my absolute dream sub amp... lol I have 3 p3d2 Rockford 10s on an r1200-1d but I bet this thing would absolutely slam in my trunk!!!!!

[@jpmavichana]

You cant go wrong going with RF and JL Audio amplifiers. I have a RF T1500-bdcp pushing 12w7 in a spec ported box. Also, JL Audio XD 800/8v2 pushing a 3 way Hertz Millie Pro components, RF T2 tweeters and 2 way RE Audio XXX 6.5. components. They sound awesome.

[@stevenhelms2796]

Have a rockford fosgate p325.2 bridgable amp. Running a single 10 " sub. Bought this 13 years ago and still bangin im my single cab. Can testify. These amps are full of power and bullet proof. This amp has blown 2 subs over the years but she keeps doing the damn thang so shes gonna ride with me till the wheels fall off

[@toysareforboys1]

Just killing it with the picture in picture bro! Nice work :)

[@MommasGoldenChild_loc0364]

By far my favorite Amp there is really no comparison I’ve played these amps for hours at max and have never let me down

[@andsanluis80]

THANKS TO YOUR REVIEWS I BOUGHT THIS AMP AND THE T1 12 INCH SUB FOR MY 2015 HONDA CIVIC SI COUPE...THANKS KEEP UP THE GREAT REVIEWS....G.B.Y.

[@wal]

👌😬👍

[@BeesonsCars]

My friend has one of these and he borrowed my kicker L7's (10's) and man. I've never heard them slap so hard, this amp is no joke. He's getting some Memphis M6 subs to compliment the new amp.

[@760sanchez21]

I have one of these sitting in my garage as a backup. I did not realize it was a power-house (never hooked up). Thanks for the video BigDWiz!

[@wal]

Yeah boi 😬

[@devillenm5525]

Dude you should sell it to me... lol it's my dream amp. Wife would kill me if I spent 800 on it. Lol

[@Jooe-s4j]

@@devillenm5525 just bought this without my wife knowing lol. Keep your accounts separate if you can lol.

[@TrunkThunderLithium]

Sound of tri state is down the road from me. Best car audio installers an sellers in state of Delaware hands down

[@aaronwoodall1801]

about time! i own this one and still rock it out!

[@wal]

Yeah boi 👌

[@vellowilson5857]

Rockford amps are monster!!!

[@jonathanpinders.r.5627]

It's good to see you back big D hope your buddy is doing ok.

[@jamienichols6277]

I've yet to own a Rockford Fosgate amp. I wouldn't hesitate to buy one after seeing all these dyno test.

[@JGreen46]

Thank you for showing the power of the Rockford amplifier I appreciate everything you do on your KZbin

[@N54God666]

I love rockford and love that their amps do rated power, but this is how you blow subs

[@donovandeponte8187]

im so sorry, i bought an amp without reading the affiliate link in the description prior :( i love your vids

[@bang2loud1981]

I'm going to be running 2 of these in my new build on 2 soundqubed hds312's at 1 ohm with 2 rockford fosgate t400-4 on my mids and highs in the back of a 2023 hyundai tucson limited

[@herbyverstink]

Great Video BigD! Ive shared this with you before..but a younger version of myself bought a Rockford Fosgate Power 800a.4 back in 1999 and installed in my Honda Accord..i later relocated it to my '01 truck..where it still sits ..and still works about like it did from day 1...nearly 20 years out of an amp..yeah it cost a few sheckles more than some of the competition..I think i paid ~ $670 back then..so $36 a year :-)...so happy with it i bought the T10004.ad for my new install.

[@hondaaccord2425]

@@herbyverstink why not the t-1500?

[@wardelliott5594]

I just bought this amp and put it on two 15 inch Kicker Solos And this thing freaking pounds. It’s a great amp

[@jamiec6504]

I know I’m VERY late to this video and I’m slightly embarrassed for not seeing this review. I’ve never a big fan of Rockford amps guy but these ‘T’ lines of amps are legit. Nice review big guy$

[@MrLow86]

I'm running this amp with my 2 15s at 2 ohms and it goes off by far the best amp I have ever owned and have had it over 10 yrs now and wouldn't trade it for the world its birth certificate says it's rated at 1,960 watts

[@jefferyglover4295]

How do you have your 2 subs ran from the speaker box to the amp? I'm confused on this 4 output on a mono block amp.

[@jefferyglover4295]

The booklet says it's internally in parallel mode on the inside the amp and I was just wondering how do I hook my 2 subs up like you did Boss.

[@MrLow86]

In parallel if your subs are dual voice coils take a jumper from 1 positive to 1 negative on 1 sub and that will leave you 1 positive and negative do the same on the other sub and that will leave you just 2 positives and 2 negatives and just hook the positives together and the 2 negatives together and run the 2 wires to the amp and if that sounds confusing just look up how to wire subs on here if that is easier homie

[@jefferyglover4295]

@@MrLow86 Thank you Boss

[@the666bud]

rockford Has always been good stuff lost a little respect for them when best buy started selling them I got r1200 1d and love it keep videos coming big d

[@wal]

Oh yeah boi 🤙

[@03_austindrake88]

This goes to show, Rockford still builds great products. (I know this video is older but nothing has changed with Rockford's quality). I have heard only old people like Rockford. Well guess I'm old then bcuz I still like Rockford.

[@RobHTech]

I don't see any links to tests of the other amps. That CP tech is really cool. But, it is designed to run your speakers as hard as it can, which can blow speakers. It requires a little extra tuning.

[@calvinevans8305]

I still got my power 10001 bd that was made in Tempe Arizona.

[@MrGetmoney84]

I had a T-1000.1 1ohm stable pushing an 18 inch power hx2 for the longest had an coil issue gonna have sub built even better

[@MadDragon75]

Rockford Fosgate has always had sexy amplifier insides. I remember the Punch 45 driving two punch 12"s was amazing back in the day.

[@wal]

Yessir, those are still some of my favorite designs

[@derekaustin4986]

I love your sidekick at the end brotha! Awesome dyno. Thanks for keeping it real like you always do 👍

[@xalint1]

Like seeing those good quality Nippon caps in amps. This amps looks like it would last for a good while.

[@2414kels]

One of my cars I barely drive is a 2005 Buick Park Ave. I decided last weekend to put two Kicker 15 CVR's I had laying around I forgot I had this T1500 I only tested it years back and didn't use it. I finally hooked it up to the two 15 CVR's with a Rockford R2 300X 4 ch. Hitting really hard.

[@akuma4u]

My buddy has this amp. It is great and i love the technology in it where it stabilizes the power so it keeps loss from impedance rise to a minimum. But....the price tag is extreme. So my question is...are there any more affordable amps in the 1800 to 2000rms range that are comparable with similar technology and sq but at a cheaper price??

[@emils393]

Check helix m series

[@celestemccoy5476]

Love seeing amp guts, I'm amazed Rockford can make a 3000 watt amp with half the components other brands need to make the same wattage.

[@bigmatt8817]

Celeste McCoy apparently you've never seen the guts of Brazilian amps

[@celestemccoy5476]

I have, just didn't think about Brazilian amps since I'm out right not interested in them. But that is correct they use even less components for that amount of wattage.

[@bigmatt8817]

Celeste McCoy interested or not they're still doing it on less components and way less power

[@blkngwinn]

You get what you pay for.

[@mikeunivers]

but the rockford can last all day the Brazilians not so much, also sound like a vacuum cleaner

[@chrisstanek2758]

Great video I got this amp and holy smokes. The bass knob is not a regular style bass knob it dowsnt turn your bass down but is a bass boot so when older songs without bass comes on you can bring the bass out of them by turning up the knob

[@deondiggs61]

That intro beat is TIGHT!

[@jamest.5001]

I never really cared for Rockford "R.F." or mtx . but I maybe kinda changing my mind. I was in it deep in the 90's and kicker and orion was king at my local dealer! it was mostly their sub's I didn't care for. especially mtx. that series that nearly ended them. great video!

[@bbc762x51]

My favorite part of this video if the F50 model!

[@jamesiepoo420]

Yo Big! So I was looking at this amp to go with the RF P3 loaded enclosure stock wired to 1ohm but after seeing this IDK.... think it's too much power for those subs? 2400w max but with these amp numbers.... help? Thanks!

[@Brian1.]

Freaking awesome video my friend. Thanks for the info on the constant power concept too

[@PalmettoMoon]

Brian Miles Gamecocks in the house! 👍

[@Brian1.]

PalmettoMoon Gamecocks for the win!

[@PalmettoMoon]

Brian Miles You know it!

[@mrfreeman1763]

Snagged mine new on ebay for south of $500, best sub amp I've ever had. Yes, it's a bdcp.

[@wal]

These are superb amps!

[@geofftubeyou]

Keep the good stuff rolling. I love the Rockford Fosgate.

[@wal]

Thanks for watching and commenting 🤙

[@accordingtohonda4308]

This is why I'm a Rockford Fosgate fan boi.

[@wal]

👌😊👍

[@eddiefromcali]

Loved this amp but hated how hot it got even when just idling. Had to get rid of it because I wasn't too comfortable with those temps where I installed it.

[@Crookedletta601]

Mine does the same but it has “ never “ shut off even in Phoenix 114 heat❤️❤️🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾💯💯💯💯🔥🙌🏾🙌🏾🙌🏾

[@cain2bad]

Oooh yeah watching @BigDWiz and rocking my oss t-shirt. Great video BigD

[@033Fritz]

Hey D! I was wondering if that was a used or refurbed amp because when I purchased my 1500bdcp’s each came with the remote bass knob. Another thing... imo this is hands down the best sounding class D amp out there, and I’m not a class D fan. But especially in the RMS, dynamic power & SQ combined these amps really crush it compared to most if not all. Hope all is well!

[@jasonlopez4855]

I paid $900 for it new and worth every penny best around for the money Rocker Fosgate power love HX3 (12)in old school.

[@TheKnobCalledTone.]

Fun fact: Rockford Fosgate stereos are a factory option on many Mitsubishi vehicles (and probably the best OEM stereo system I've ever heard). I almost bought a Lancer about 10 years ago just because the factory RF stereo sounded so good.

[@wal]

It’s true but the upgrades factory systems are in most cases nowhere near as good as a decent upgrade using quality components.

[@robsorgdrager8477]

I always got a kick out of how the gen 1 bamf s uses a similar heat sink and poly cover as the power amps.

[@303nitzubishi4]

Thanks for another great vid big D! PiP of the current simultaneously with the dyno display really makes a difference. Thanks for the tech tutorial at the beginning I was not aware of that type of power supply. I've never been an RF guy but there's no arguing with the quality of their products. That black finish and honeycomb heatsink is great to look at too

[@domsugar9160]

I had my subwoofers hooked up to a 10000bd punch I believe and even that was pretty intense for my 12 and I didn't even have the gain up all the way as well but when I put the 1500 BD consistent power amp you can feel you can hear the difference yes the 1,500bd cp is more powerful than a 1000bd power. But the consistent power makes a difference and that amp is cleaner than the 1000 BD just saying

[@Van1018s]

Love seeing that 14-16 gauge remote input. Someone needs to tell companies that 8-4 gauge prolly isn’t necessary.

[@schalachi]

i had a bdcp amp like this and it was absolute beast. best amp i ever owned. had to sell it as i was strapped for cash one point in my life. happens

[@rubicscube7827]

I was able to pick this amp up for $600.00 (after taxes too) on amazon. I got $150.00 off coupon code for being approved for Amazon credit. I didnt realize that this amp doesnt use RF's CLEAN system for detecting clipping, its ok i do have a DD-1 but still. I would think if some of their Punch series have this why wouldnt their Power series?? Also, i agree, for this kind of money, it should come with a bass nob.

[@Balancinglife]

Thank God for these dyno tests

[@urosb82]

First I hit that like button then I get to watch it! BigD for D Win!

[@Brock_Landers]

Good old Rockford Fosgate...proof of the old adage that you get what you pay for. They never disappoint, only perform.

[@kevin666b]

I had one of these driving two p3’s wired to 2ohm and it was beating the shit out of them. Amazing amp. I upgraded to the t2500-1bdcp though. Love it. I need a second one 😂

[@TheMediaPlugs]

the t2500 on Rockford p3s ?

[@getfitwithme8405]

I got two T2D2’s with the aluminum basket.. thinking two 1500’s will get them moving

[@kevin666b]

@@getfitwithme8405 you won’t be disappointed. Do it!

[@RobHTech]

Best to run it 2 Ohm min. and not below. 4 Ohm is pretty good performance. 2-4 Ohm has better amp control over the sub movement.

[@wal]

Great tip

[@MrDanielknew]

Derek have you ever done an amp dyno test with capacitors and super caps to see what the difference is when you don't use them on the dyno

[@williambrown3538]

I have and love this amp 💯

[@LivinLoudwithAndy]

“Is this your last one “ Every bassheads daughter 🤣

[@Skylarkberto]

Great workhorse amp I have 2 1000.1 BDCP’s and also bought them at sound or tri-state.

[@Brock_Landers]

I would really like to see an Orion HCCA 8000 tested sometime. It says 32400 watts max...but is only rated at 9000 watts RMS at 1 ohm. I love Orion, especially the HCCA line, but I am doubtful of that 32400 watt output.

[@biffisgreat]

They r nice amps, had a 1000-1bd for years, prolly 10, still rocking in my nephews car! Paid 799 Canadian for it, hell of a deal back in the day! Ran a pair of alpine type r 15s @1ohm mono, worked very well

[@NightmareonAnyStreet_]

I have this amp pushing 2 12w6v3 subs ported and I have to turn the speaker level setting on my pioneer hu to negative 13 because the subs overpower my highs and mids. I have morel tempo ultra component set. This amp is powerful as hell

[@akuma4u]

-13 at 1 ohm and gain on amp all the way down?

[@donovandeponte8187]

on rockford’s website, they say the amp is NOT bridgeable… yet @2:06 you say that the amp has an input AND output to pass signal to another amplifier. does that mean you can stack two t1500’s for a total of 3000 watts rms or no? my ignorance is partly due to my confusion of bridging amps and stacking amps. any help would be appreciated!!

[@wal]

Amp has pass thru for RCAs, but is not linkable. You can use two amps, but not "link" them together to use as one

[@tdot1269]

I wish somebody would start a channel doing these power output test on subs in a real world situation to see what they do with impedance rise.

[@patrykkiszczynski9422]

Please do a Dyno test on the Pioneer GM-D9701, seems like a great budget amp and it comes with a volume knob.

[@rmblwgn]

Same exact as 9601 which he dynod

[@patrykkiszczynski9422]

@@rmblwgn so is it only an aesthetic upgrade?

[@rmblwgn]

@@patrykkiszczynski9422 yes. I don't know what's up with Pioneer but they refuse to spend any money on their mobile line. However those are great amps I have the 8601. God I wish Pioneer would bring back their SPL Pro line

[@patrykkiszczynski9422]

@@rmblwgn totally agree, they were legendary products sadly Pioneer seemed to slowed down on Pioneering new products :(

[@rmblwgn]

@@patrykkiszczynski9422 just google d1200spl and take a close look at the inputs, outputs, fuses and power rating. almost like the Rockford Fossgate of Pioneer amps. man I wish they still made legendary stuff

[@jpmavichana]

Great video! I am currently running an Alpine PDX-M12 (1200 watts RMS 2-4 ohms) to a JL Audio 12W7. If I was going to upgrade it would be amp. I still have a RF Punch P500X1BD and it slams the heck out of my 12" RF P3. I will buy this amp first before JLAudio 1200/1v3, which cost almost $400 more.

[@johnwilson7799]

2 questions. 1) what type of work do you do? 2) I know you have a old school setup in your ride? Whatcha running?

[@wal]

2 answers. 1) Work tryna keep you guys entertained 2) 1993 RF Punch 200 DSM powering JL Audio 10W3 in optimized ported box, Boston 6.5" Pro series components up front (currently passive via factory amp). Plans to make them active by running a 4ch amp to them

[@johnwilson7799]

@@wal running visonik 12's on a old sony 800. Thanks for the reply.

[@Pittsburgh-412]

It's not just about the amount of wattage, but how the music and sounds are produced and how long it can do it for at high wattage. That's where this is outperforms most others. This amp will slam all day long and not care

[@wal]

Good point. Hopefully this can be explained further in the in-car future tests

[@obetztyranthunter]

As long as you have the proper electrical. Rockford amps pull alot of power with a lower efficiency percentage

[@sburton982]

I ran a 0 gauge battery wire into this 1500 watt fosgate, that thing was a total beast, my best amp ever to this day, to bad someone stole the car 2 years later. Bet the chumps they never got the full potential

[@jefferyglover4295]

So you can run a 0 gauge to this 1500bdcp? How did you do it Boss?

[@sburton982]

@jefferyglover4295 ran it from the battery with a fuse block attached for protection, (it never popped though) straight to the amp itself, just make sure that you have a decent alternator and it will beat the hell out of trunk!! Good luck my dude 🙏

[@jefferyglover4295]

@@sburton982 Thank you so much Boss for the information!

[@ddchill7763]

Did not know much about fosgate bought the t1500 amp for $100 at a pawn shop. Next thing you know I got two t12s

[@Trapperjohn1000]

Big D. If you ever get a chance, please dyno the Soundqubed 4500.1 please!

[@wal]

We shall see sir...

[@Trapperjohn1000]

Thanks so much for the possibility! Thanks Big D!!!

[@danieljordan1652]

Been waiting for this. Thank you! I have been driving myself crazy trying to decide between this amp and the jl slash 1000/1 for my w7.

[@travishulse3449]

Im runnin a 13w7 wired to 2.5 ohms and it kicks ass

[@iTROCITY_ttv]

@@travishulse3449 how is it wired to 2.5 when it’s a 1.5 DVC? Wouldn’t it be .75 or 3?

[@anthonybarrios-up8sq]

What amp did you decide to go with?

[@thingsdemystified]

Isn't box-rise accounted for in speaker design? If you try to counter that, the designed frequency response will no longer be. It would be like you couldn't design an enclosure using software. You basically slap a sub in a box and hope it sounds good.

[@iceman45ification1]

As typical with Rockford amps, underrated. For that price though, unless you're a diehard Rockford fan, you're better off with the US Acoustics Mike. Great video brutha!! 👍👌

[@wal]

Thanks Danny B 🤙